固体燃料ATR涡轮/压气机匹配方法研究

为了获得固体燃料空气涡轮火箭发动机(SP-ATR)中涡轮和压气机的匹配工作特性,建立了涡轮和压气机的工作特性模型,根据SP-ATR转速、功率和背压平衡的工作特点,分别基于涡轮和压气机的工作环境先后采用两种不同的方法完成了二者的匹配。对比两种匹配方法得出结论:(1)基于涡轮的匹配方法与转速稳定过程一致,可确定特定飞行环境中发动机的转速;(2)基于压气机的匹配方法需要条件更少、适用范围更广,可用于特定转速调控方案下驱涡燃气流量的确定。两种匹配方法的计算结果相对Ax STREAM仿真结果的最大误差为10.75%,两种匹配方法的计算结果相差不超过8%。将建立的匹配方法应用于HARM弹自主爬升飞行过程,得到SP-ATR驱涡燃气流量的定量调控规律。     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

扩频测控信号大动态信息频域加载方法

针对静态扩频测控信号的大动态信息加载,提出一种基于数字化处理的频域高精度加载方法。方法采用不同的处理方法分别对两路信号加入动态信息,其中一路通过FFT和频谱搬移加入载波多普勒信息,另一路通过对扩频码进行延时处理得到包含动态信息的扩频码,并使用第二路信号对第一路信号进行调整,从而实现原始扩频测控信号的动态信息加载。仿真结果表明,方法可以保留原信号内载波和扩频码的相关性以及原始信号中可以反映信道等特性的噪声,同时实现动态信息的高精度加载。     

固体燃料空气涡轮火箭发动机工作模式

根据SP-ATR目前存在的燃气难以兼顾清洁和富燃的问题,文章提出将原本由1股燃气单独承担驱动涡轮和补燃功能的工作模式分解为由2股燃气分别担负驱涡和补燃功能的工作模式。通过对比分析该工作模式的SP-ATR和固冲发动机、涡喷发动机工作特点,提出了适合该形式SP-ATR的性能计算模型,得到其飞行包线,发现该SP-ATR工作包线宽广,可完全包含涡喷和固冲发动机的工作包线。在此基础上,计算得到了SP-ATR在不同空域和速度条件下的飞行性能及变化规律:(1)随飞行高度和速度的增加,其比冲、比推力增加,但性能随外弹道变化幅度较小,整个工作范围性能稳定;(2)在近地面和低空SP-ATR均可实现低空亚音速盘旋和5 km高度以上的超音速飞行,且在比冲高于6 700 N.s/kg,同时保持比推力大于1 100 N.s/kg;(3)高空SP-ATR工作高度速度范围宽,比冲性能与冲压发动机相当,比推力为冲压发动机的2倍,相同飞行速度条件下飞行高度增加比冲增加、比推力增加,具有在更高高度巡航潜力,高空性能优势明显。     

石英加速度计故障机理研究与仿真建模验证

针对加速度计故障定位测试方法不明确、周期长且定位不准确的问题,对加速度计故障机理进行研究以及验证.首先,通过对加速度计结构、工作机理、试验环境等方面的结合分析,从理论上研究了加速度计正负饱和、无输出等常见故障模式;其次,通过故障机理分析与20多种试验仿真模拟,建立每一种故障对应的故障模式;结果表明:加速度计每种故障与测...     

基于多元特征的终端区运行场景分类分析方法

为了提升对气象影响下终端区运行场景的认知理解,支撑基于场景的终端区预战术辅助决策及管制新模式的建立,提出了一种基于多元特征的终端区运行场景分类分析方法。针对终端区场景描述与分类需求,构建由终端区气象、交通、流量策略三个领域构成的多元特征,通过多源异构数据的预处理进而建立了终端区场景量化指标集,并选取模糊C均值聚类(FC...     

超燃冲压发动机燃烧室主动冷却设计研究

超燃冲压发动机燃烧室主动冷却模型制造和热考核试验的费用高昂、周期长,为了降低试验风险,采用三维计算和经济的验证试验相结合的方法开展了超燃冲压发动机燃烧室主动冷却设计。冷却结构基本参数设计和侧壁冷却流动设计是确定设计方案的两大基础,前者采用三维传热计算结合冷却面板传热验证试验完成,后者采用超临界燃料流动三维并行计算结合水流动验证试验完成。在此基础上,经过多轮的结构设计与三维传热及强度计算评估迭代,确定了最终的燃烧室主动冷却结构。设计的主动冷却燃烧室在来流马赫数2.5,总温1700K条件下成功通过200s热考核试验,表明所采用的设计方法、验证试验和计算工具是有效和可信的。     

Aeroelastic two-level optimization for preliminary design of wing structures considering robust constraints

An aeroelastic two-level optimization methodology for preliminary design of wing struc- tures is presented, in which the parameters for structural layout and sizes are taken as design vari- ables in the first-level optimization, and robust constraints in conjunction with conventional aeroelastic constraints are considered in the second-level optimization. A low-order panel method is used for aerodynamic analysis in the first-level optimization, and a high-order panel method is employed in the second-level optimization. It is concluded that the design of the abovementioned structural parameters of a wing can be improved using the present method with high efficiency. An improvement is seen in aeroelastic performance of the wing obtained with the present method when compared to the initial wing. Since these optimized structures are obtained after consideration of aerodynamic and structural uncertainties, they are well suited to encounter these uncertainties when they occur in reality.     

Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

脉冲雷达凝视模式下低轨碎片相对运动特征分析

脉冲雷达凝视模式是一种探测低轨小碎片的重要方式,其中低轨碎片与雷达的径向运动关系是碎片统计分析的基础.为推算碎片相对雷达的运动特征,基于坐标系的相互转换,先利用雷达测站信息,得到可见碎片在地惯坐标系下的轨道信息;再逆向将目标不同时刻的位置转换至测站坐标系下,得到目标的径向运动特征.在不同要素（雷达波束指向、雷达仰角、测站纬度、目标距离）下,仿真及对比分析了各个参数对速度模糊度、雷达可见性等的影响,得出在凝视模式下目标相对雷达近似做径向匀加速运动,这为后续试验工作提供有力的依据.