浅论无人机机载卫通天线尺寸与数字信号传输带宽关系

卫星通信是无人机中继通信的重要手段。本文对无人机卫星通信链路中飞机总体设计关注的机载卫通天线尺寸选择问题进行了较详细的计算、探讨。     

整体构件周向叶片电解加工流场设计及实验

针对整体构件周向叶片的特点与加工难点,设计了带有内置绝缘腔的电解套型加工工具阴极,建立了两种进液方式的流场三维模型,采用有限元法对两种进液方式的流场进行仿真计算。计算结果表明由绝缘腔的叶盆叶背两侧进液并对出液口进行优化的流场方式较好,电解液流速较高且流场较均匀。使用根据有限元仿真结果设计的阴极开展实验,结果表明实验与流场仿真结果相符,采用优化流场模型的加工过程流场稳定,加工效率较高。     

行星着陆轨迹优化技术研究进展

针对行星大气进入、动力下降过程动力学环境及约束条件等进行了分析,回顾了近年来行星着陆轨迹优化的研究现状。在此基础上,结合行星着陆轨迹优化技术在动力学特征、约束条件、不确定环境方面的特点,从非线性动力学的等价/近似变换技术、复杂约束条件下的最优轨迹快速求解技术、不确定条件下的能控/能达性分析技术三个方面,对行星着陆轨迹优化的关键技术进行了梳理。     

Nostoc sphaeroides Kützing,an excellent candidate producer for CELSS

Some phytoplankton can be regarded as possible candidates in the establishment of Controlled Ecological Life Support System (CELSS) for some intrinsic characteristics, the first characteristic is that they should grow rapidly, secondly, they should be able to endure some stress factors and develop some corresponding adaptive strategies; also it is very important that they could provide food rich in nutritious protein and vitamins for the crew; the last but not the least is they can also fulfill the other main functions of CELSS, including supplying oxygen, removing carbon dioxide and recycling the metabolic waste. According to these characteristics, Nostoc sphaeroides, a potential healthy food in China, was selected as the potential producer in CELSS. It was found that the oxygen average evolution rate of this algae is about 150 μmol O₂ mg⁻¹ h⁻¹, and the size of them are ranged from 2 to 20 mm. Also it can be cultured with high population density, which indicated that the potential productivity of Nostoc sphaeroides is higher than other algae in limited volume. We measured the nutrient contents of the cyanobacterium and concluded it was a good food for the crew. Based on above advantages, Nostoc sphaeroides was assumed to a suitable phytoplankton for the establishment of Controlled Ecological Life Support System. We plan to develop suitable bioreactor with the cyanobacterium for supplying oxygen and food in future space missions.     

飞机蒙皮镜像铣切原理与算法分析

随着绿色制造技术的不断发展,镜像铣切技术成为蒙皮加工的新型技术,是集减薄、切边、开口、钻孔于一体化的多功能铣削技术。本文在分析系统组成和工作原理的基础上,对镜像加工工艺、后置处理算法、加工过程仿真和点位检测仿真进行了研究。     

摩托车备件销售实行联合经营和规范管理初探

对摩托车备件销售提出了联合经营的设想；详细论述了如何实行备件销售管理的规范化；建议运用计算机技术来参与销售管理，从而提高备件销售的经济效益，使整车销售与备件销售同步发展。     

添加镍粉和二硼化锆防静电涂层的对比研究

对添加镍粉和二硼化锆涂层的导电性进行了对比试验，讨论了添加型防静电涂层的防静电机理。试验结果表明：添加型防静电涂层导电通路的形成是导电粒子的直接接触和隧道效应综合作用的结果。文中还推导了计算涂层中导电粒子间距的近似公式。     

纳米计量学与纳米计量测试技术（一）

从纳米计量与测试的总体概念出发，参考Ｔｅｇｕｅ等人的文章，综合国内外在这个领域的研究情况，并引用我们的科研成果，对纳米计量学与纳米计量测试技术发展现状及前景进行了讨论，讨论的问题包括：如何实现纳米尺度计量；建立纳米参考坐标系；产生纳米精度重复运动；纳米精度传感器与纳米会标参考系建立联系；各种纳米精度测量技术的不确定性限制等。     

一种非线性规划的求解方法与燃气发生器的设计

阐述了一种新的非线性规划的求解方法。即对每个参变量在其可能变化区间内，按照特定的步长依次代入约束方程来观察是否满足约束条件，从而求得若干组可行解。变量变化的步长通过非线性方程组各个方程在近似结点的全微分的分析获得。步长的确定是本方法的关键。文中并示范性列举了本方法在燃气发生器设计中的作用。