A compact, light-weight high data-rate antenna system for remote-sensing orbiters and space exploration

Upcoming space missions utilizing hyperspectral or other high-resolution sensors will generate a vast amount of data in orbit. The average communication duration between a spacecraft in low Earth orbit (LEO) to a dedicated ground station is short and in addition, due to the high amount of data to be transferred at link times, a high-performance communication system on board of the satellite is indispensable.A solution that provides longer acquisition times with the ground station is to employ a high data-rate inter-satellite link to a geostationary relay satellite, which requires a flat, compact, steerable, light-weight yet robust antenna. Such an antenna system (antenna module plus pointing module) was developed for S-Band at the Institute of Astronautics (Technische Universität München), in cooperation with German space companies, research institutes and the German Aerospace Center (DLR). Its successful operation via the geostationary relay satellite Artemis was demonstrated in cooperation with ESA in 2007.This paper describes the evaluation of an antenna system in the Ka-Band, as a successor to be developed in the next two years for high data rates and the various applications of such an antenna system.     

Formaldehyde in the far outer galaxy: constraining the outer boundary of the galactic habitable zone

We present results from an initial survey of the 2(12)-1(11) transition of formaldehyde (H2CO) at 140.8 GHz in giant molecular clouds in the far outer Galaxy (RG >or= 16 kpc). Formaldehyde is a key prebiotic molecule that likely plays an important role in the development of amino acids. Determining the outermost extent of the H2CO distribution can constrain the outer limit of the Galactic Habitable Zone, the region where conditions for the formation of life are thought to be most favorable. We surveyed 69 molecular clouds in the outer Galaxy, ranging from 12 to 23.5 kpc in galactocentric radius. Formaldehyde emission at 140.8 GHz was detected in 65% of the clouds. The H2CO spectral line was detected in 26 of the clouds with RG > 16 kpc (detection rate of 59%), including 6 clouds with RG > 20 kpc (detection rate of 55%). Formaldehyde is readily found in the far outer Galaxy-even beyond the edge of the old stellar disk. Determining the relatively widespread distribution of H2CO in the far outer Galaxy is a first step in establishing how favorable an environment this vast region of the Galaxy may be toward the formation of life.     

双层旋转锥形液膜一次破碎特性数值研究

为了全面加深对锥形液膜一次破碎机理的认识,对双层锥形液膜的雾化过程进行了数值模拟,重点研究了压降和同轴旋转空气对双层液膜宏观形态、液膜破碎模式、液膜破碎长度和喷雾锥角等液膜一次破碎特性的影响。数值计算的喷雾场宏观形态与试验结果接近,喷雾锥角和索特尔平均直径的计算最大误差分别为4.9%、7.4%。研究表明：同轴旋转空气参与雾化会改变喷雾场的整体形态;增大压降和空气速度会改变液膜的破碎模式和主导表面波模式;双层液膜的合并会在液膜表面产生剧烈的表面波动,同时会略微增大液膜的喷雾锥角;液膜的破碎长度会随着压降和同轴旋转空气轴向速度的增大而减小。该研究有助于进一步研究双层液膜一次破碎的机理,从而指导对双路离心式喷嘴的雾化认识。     

Photon counting detector for space debris laser tracking and lunar laser ranging

We are reporting on a design, construction and performance of solid state photon counting detector package which has been designed for laser tracking of space debris. The detector has been optimized for top photon detection efficiency and detection delay stability. The active area of the commercially available avalanche photodiode manufactured on Si (SAP500 supplied by Laser Components, Inc.) is circular with a diameter of 500 μm. The newly designed control circuit enables to operate the detection sensor at a broad range of biases 5–50 V above its breakdown voltage of 125 V. This permits to select a right trade-off between photon detection efficiency, timing resolution and dark count rate. The photon detection efficiency exceeds 70% at the wavelength of 532 nm. This is the highest photon detection efficiency ever reported for such a device. The timing properties of the detector have been investigated in detail. The timing resolution is better than 80 ps r.m.s, the detection delay is stable within units of picoseconds over several hours of operation. The detection delay stability in a sense of time deviation of 800 fs has been achieved. The temperature change of the detection delay is 0.5 ps/K. The detector has been tested as an echo signal detector in laser tracking of space debris at the satellite laser station in Graz, Austria. Its application in lunar laser ranging is under consideration by several laser stations.     

Wave-like perturbations in the ionospheric F2-layer observed after the Ms8.1 Samoa earthquake of September 29, 2009

A study of the critical frequency foF2 variations after the large earthquake (M_s = 8.1) which occurred on 29 September, 2009 in the region of Samoa Islands in the Pacific Ocean is carried out using data of the ionospheric station of Kwajalein. The epicenter of the earthquake was located at about 184 km southwest from Apia (the capital of West Samoa). It was found that wave-like perturbations of foF2 were observed for ∼3 h above the station (located approximately 3560 km northwest from the epicenter). The amplitude of the disturbance was as large as ∼20% of the average magnetic quiet day foF2 values. A comparison of the observed perturbations of foF2 with the ones detected at Stanford ionospheric station after the Alaska earthquake of 28 March 1964 (M_s = 8.4) showed a close similarity of the wave-like perturbations of foF2 in both cases.     

试飞院仿真技术发展中的几个问题

试飞院的飞行仿真工作主要围绕着改善模拟逼真度，提高仿真试验效率和效益及建立建模和仿真试验环境三方面开展工作。文章重点介绍了该院飞行仿真的总目标，总思路及实际应用情况，简要地叙述了其仿真技术和模拟器设施的发展，包括发展历史，现状和技术水平，还简要地说明了国外飞行仿真技术的发展。目的是为了加强试飞院的空地飞行模拟器的建设以适应我国航空工业发展的需要。     

Hard X-rays observation of her X-1

An hard X-Rays (15–170) KeV measurement of the spectrum of Her X-1, during a mid turn on is presented. The presence of an emission line at about 53 KeV during the mid-on state is confirmed by the present measure.     

The Mercury Laser Altimeter Instrument for the MESSENGER Mission

The Mercury Laser Altimeter (MLA) is one of the payload science instruments on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission, which launched on August 3, 2004. The altimeter will measure the round-trip time of flight of transmitted laser pulses reflected from the surface of the planet that, in combination with the spacecraft orbit position and pointing data, gives a high-precision measurement of surface topography referenced to Mercury’s center of mass. MLA will sample the planet’s surface to within a 1-m range error when the line-of-sight range to Mercury is less than 1,200 km under spacecraft nadir pointing or the slant range is less than 800 km. The altimeter measurements will be used to determine the planet’s forced physical librations by tracking the motion of large-scale topographic features as a function of time. MLA’s laser pulse energy monitor and the echo pulse energy estimate will provide an active measurement of the surface reflectivity at 1,064 nm. This paper describes the instrument design, prelaunch testing, calibration, and results of postlaunch testing.     

Are Boltzmann plots of hydrogen Balmer lines a tool for identifying a subclass of S1 AGN?

It is becoming clear that we can define two different types of nearby AGN belonging to the Seyfert 1 class (S1), on the basis of the match of the intensities of their Broad Balmer Lines (BBL) with the Boltzmann Plots (BP). These two types of S1 galaxies, that we call BP-S1 and NoBP-S1, are characterized, in first approximation, by Broad Line Regions (BLR) with different structural and physical properties. In this communication, we show that these features can be well pointed out by a multi-wavelength analysis of the continuum and of the broad recombination Hydrogen lines, that we carry out on a sample of objects detected at optical and X-ray frequencies. The investigation is addressed to verify whether BP-S1 are the ideal candidates for the study of the kinematical and structural properties of the BLR, in order to derive reliable estimates of the mass of their central engine and to constrain the properties of their nuclear continuum spectrum.