变循环发动机后涵道引射器的研究现状与关键技术

变循环发动机是航空发动机的发展方向。相较于传统的航空发动机,变循环航空发动机在加力燃烧室中设置了后涵道 引射器这一典型可调几何机构,以满足整机对气动匹配、推力和燃油经济性的需求。讨论了变循环发动机后涵道引射器的发展历 程、布置位置、结构形式等,分析了后涵道引射器的结构特征和功能特点,点明了对加力燃烧室气动热力性能、结构尺寸的影响和 对发动机推力、耗油率的影响。同时,结合后涵道引射器的发展历程和技术特征,指出了其在性能、结构和控制等方面需要深入研 究的快速响应、精准控制和高可靠性等关键技术。通过对后涵道引射器的讨论和分析,以期为变循环发动机乃至未来涡轮基组合 循环发动机的后涵道引射器性能和结构设计提供参考。     

基于神经网络的航空发动机全包线PID控制

提出一种基于神经网络的航空发动机全包线PID控制器参数整定方法,在全包线内选定若干离线整定点,在这些点离线整定PID控制器参数kp,ki,kd.以离线整定点参数为训练样本,离线训练BP神经网络,该网络可映射高度H,马赫数Ma与kp,ki,kd的非线性关系,便可用该网络在线整定包线内任意点的kp,ki,kd.用发动机非线性部件级模型为被控对象的数字仿真表明,用上述方法设计的发动机PID控制器在全包线内,都能获得理想的动静态品质.该方法简单易行,效果好,具有实用价值.     

多学科设计优化的低自由度协同优化方法

为了解决协同优化(CO)方法计算量过大的问题,提出了低自由度协同优化方法(Low degree-of-freedom collaborative optimization,LDFCO)。LDFCO的系统级优化通过调整共享设计变量和辅助设计变量,使系统目标最优,且满足一致性约束条件。子系统优化通过调整局部设计变量,使子系统目标最优,并满足局部约束条件。子系统目标有两种形式:最小化本子系统的一致性约束函数和直接与系统目标有关的状态变量的加权和,或最小化一种不同于前者的一致性约束函数。通过3个算例检验了LDFCO的效率,结果表明LDFCO方法的计算量比CO方法大大减少。     

采用主流FPGA的数字电路在线生长进化方法

采用主流FPGA器件构建了在线进化平台,提出了一种适合较大规模数字电路在线进化的生长进化方法。该方法模拟植物生长机理进化以解决进化速度缓慢问题,采用增长验证评估方法取代传统的穷举式验证评估方法来解决在线验证评估难题;应用免疫遗传算法克服遗传算法的早熟收敛问题;采用多参数级联十进制整数编码方法缩短染色体长度;采用生长进化方法成功地进化出了16位加法器和8位乘法器。对比实验结果表明,采用生长进化方法无论是进化出的电路规模,还是进化速度均优于传统的直接进化方法。     

钢丝绳检测数据的可靠性评定方法

该系统对钢丝绳试验站检验数据及日数据微机处理。通过原始数据的录入，可以自动生成成试验站用各种报表、判断是否符合《煤矿安全规程》并进行可靠性评定。     

基于SAR图像匹配结果可信度评价的INS/SAR自适应Kalman滤波算法

在惯性导航系统（INS）/合成孔径雷达（SAR）组合导航系统中,SAR图像易受斑点噪声的影响,图像匹配的精度对整个导航系统精度的影响十分明显,能够准确地分析SAR图像匹配过程中的误差特性,利用有效的图像匹配信息辅助INS进行组合定位尤为重要。针对上述问题,在加权Hausdorff距离匹配算法的基础上,对影响SAR图像匹配精度的因素进行了分析,提出了一种基于模糊推理的匹配结果可信度评价准则,经过可信度筛选,将有效的匹配信息与INS进行组合;对合理范围内的匹配误差变化引起量测噪声统计特性发生变化,进而导致Kalman滤波精度下降的问题,研究采用改进的Sage-Husa自适应滤波算法对量测噪声方差阵进行动态调整,使其更加接近系统的当前状态。搭建仿真验证平台对所提算法进行了验证,结果表明,该算法能够在合理的匹配误差范围内,有效地筛选出可信的图像匹配结果,相比常规Kalman滤波算法,显著地提升了INS/SAR组合导航系统水平方向的定位精度。     

含孔层合板剩余强度估算的应力场强法工程简化模型

开孔的存在会显著地降低复合材料结构的强度。基于应力场强法的思想,提出了一个预测含圆孔复合材料层合板剩余强度的工程简化模型。采用大量试验数据,对本文提出的应力场强法模型与其他典型的特征距离法模型进行了评估分析。结果表明,应力场强法和平均应力准则法预测能力要优于点应力准则法和损伤区域准则法,应力场强法预测值与试验吻合程度略优于平均应力准则法。     

Approach and landing guidance design for reusable launch vehicle using multiple sliding surfaces technique

An autonomous approach and landing (A&L) guidance law is presented in this paper for landing an unpowered reusable launch vehicle (RLV) at the designated runway touchdown.Considering the full nonlinear point-mass dynamics,a guidance scheme is developed in threedimensional space.In order to guarantee a successful A&L movement,the multiple sliding surfaces guidance (MSSG) technique is applied to derive the closed-loop guidance law,which stems from higher order sliding mode control theory and has advantage in the finite time reaching property.The global stability of the proposed guidance approach is proved by the Lyapunov-based method.The designed guidance law can generate new trajectories on-line without any specific requirement on off-line analysis except for the information on the boundary conditions of the A&L phase and instantaneous states of the RLV.Therefore,the designed guidance law is flexible enough to target different touchdown points on the runway and is capable of dealing with large initial condition errors resulted from the previous flight phase.Finally,simulation results show the effectiveness of the proposed guidance law in different scenarios.     

吸气式高超声速飞行器鲁棒非奇异Terminal滑模反步控制

针对含有参数摄动、外界干扰的吸气式高超声速飞行器弹性模型,设计了一种基于新型非线性干扰观测器的Terminal滑模反步控制器。将考虑弹性模态的飞行器纵向模型表示为严格反馈形式,在传统反步法的基础上采用非奇异快速Terminal滑模控制俯仰角与俯仰角速率,优化了反步法的控制结构,并实现了系统的有限时间收敛。基于跟踪微分器设计了一种新型非线性干扰观测器,并与本文所提滑模反步方法相结合,通过对包括虚拟控制量微分信号在内的不确定性进行估计与补偿,进一步提高了控制器的鲁棒性,同时解决了"微分膨胀"问题。基于Lyapunov稳定性理论证明了系统的跟踪误差于有限时间收敛至零。仿真结果表明,该控制器在存在不确定性的情况下,可以实现对参考输入的稳定跟踪。     

Influence of coupled characteristics on the internally-staged combustor under low-power operation

An ultra low emissions combustor, namely low emission stirred swirl (LESS) combustor was studied, based on a scheme of internally staged/lean premixed and prevaporized (LPP) combustion. The LESS combustor consists of central pilot stage and outer surrounded coaxially main stage, between which there exists a physical isolation, namely the step height. The existence of step height delayed the pilot and main jets mixing. Experimental and numerical studies were carried out to investigate the influence of the step height on the combustion performance. A single dome rectangular combustor was utilized to conduct the lean lightoff and blowout experiments, and pollutant emission experiments. The experimental results showed that with the increase of step height by 38%, the lean lightoff and blowout fuel air ratio decreased by 574% and 375%, the NOx emission increased by 35.1%, and the combustion efficiency increased by 1.78%; while the CO,unburned hydrocarbons (UHC) emissions decreased. Furthermore, the total pressure loss was kept nearly constant. Non reacting and reacting flow fields were numerically investigated to analyze the coupled characteristics of pilot and main jets with different step heights. A comparison of flow characteristics, spray structure, and combustion component as well as temperature field with different step heights was conducted. The numerical results showed that the increase of the step height shifted the peak velocity outwards. The enlargement of the primary recirculation zone (PRZ) resulted in the increase of the combustion efficiency and NOx emission, while the CO, UHC emissions decreeased.