Application of hybrid regularization method for tomographic reconstruction of midlatitude ionospheric electron density

Reconstructing ionospheric electron density (IED) is an ill-posed inverse problem, with classical Tikhonov regularization tending to smooth IED structures. By contrast, total variation (TV) regularization effectively resists noise and preserves discontinuities of the IED. In this paper, we regularize the inverse problem by incorporating both Tikhonov and TV regularization. A specific formulation of the proposed method, called hybrid regularization, is introduced and investigated. The method is then tested using simulated data for the actual positions of the GPS satellites and ground receivers, and also applied to the analysis of real observation data under quiescent and disturbed ionospheric conditions. Experiments demonstrate the effectiveness, and illustrate the validity and reliability of the proposed method.     

Latitudinal features of Total Electron Content over the African and European longitude sector following the St. Patrick’s day storm of 2015

GNSS TEC values have been obtained from 18 stations distributed from the magnetic equator to nearly 80°N magnetic dip in the African and west-European longitude sector corresponding to the March 17–18, 2015 geomagnetic storm. Significantly depleted ionosphere have been observed at stations north of 50°N geographic on March 18, 2015 following the above storm over a longitude swath 11.9°–21°E covering the Eastern Africa and Western European longitude sector. High ROTI values were noted on March 17^th at locations around 80°N magnetic dip. Two prominent peaks in PCN were noted around 09:00 UT and 14:00 UT on March 17, 2015 and around 15:00 UT on March 18, 2015. Daytime thermospheric (O/N₂) ratio was markedly less on March 18th at latitudes above 60°N geographic which is suggested to be the major driver behind depleted high latitude ionosphere during the recovery phase of the storm on March 18, 2015.     

航空发动机脉动式装配生产线工艺仿真关键技术研究

面向国内民用航空发动机总装批产能力建设的需求,对标国内外先进脉动式装配生产线的研发进度和实施状态,在建设规划阶段,提出了脉动式总装生产线的工艺仿真方案。阐述了脉动式总装生产线工艺仿真的主要技术内容和关键技术方向,重点对关键技术的解决方案和实施途径进行规划,包括装配网络图建模及优化、车间工艺布局及生产仿真、基于二三维关联集成仿真的虚拟产品制造,最后对脉动式生产线数字孪生体进行了展望。     

环形燃烧室壁温对热声不稳定性影响的实验研究

为了研究壁温效应对热声振荡的影响,本文基于环形燃烧室/涡轮耦合实验平台,在当量比Φ=0.82和燃烧功率P=15.5 kW的工况参数下开展了实验研究。相比于独立环形燃烧室实验,本文所引入的涡轮导叶出口组件,使得燃烧室跟发动机实际工况出口匹配情况更接近,具有更一致的热声环境和热容效应。实验发现,在壁温升高过程中伴随着不同类型热声不稳定模式间的切换以及振荡频率、幅值等参数的演变。进一步选取了6个典型状态点,结合基于火焰图像序列的动态模态分解,对比光电倍增管信号和不同方位角的声压信号,分析了各个状态点的火焰动力学和声学响应特征。实验结果表明,在固定功率和当量比工况下,受燃烧室壁面热平衡状态的影响,热声不稳定模式先后经历了由亥姆霍兹模式、1/4波纵向模式、周向混合模式和旋转模式所主导的过程。在出现周向模式的初期,其表现为旋转率呈现肥尾分布的驻波旋-转混合模式,而后期演变为旋转率的分布相对集中的逆时针方向旋转模式。     

精密“光机—光电”位移传感器的研究与设计

提出了一种在普通扭簧比较仪上增加光学传动元件和新颖光电传感元件的精密“光机光电”位移传感器的设计新思路。这种传感器具有很高的灵敏度和分辨力，有较高的线性度和示值稳定性。     

On Truncation Error Bounds for Sampling Representations of Band-Limited Signals

All sampling representations of band-limited signals involve infinite sums. The truncation error associated with a given representation is defined as the difference between the signal and an approximating sum utilizing a finite number of terms. In this paper truncation error is expressed as a contour integral for Lagrange interpolation, general Hermite interpolation, the Shannon series (cardinal series), the Fogel derivative series, and multidimensional sampling expansions. Truncation error bounds are obtained under various constraints on the signal magnitude, spectral smoothness, and energy content.     

工装用标准限用方法

介绍了南飞公司多年来对工装用标准限用的一些原则和做法。     

水下转台系统的一种实验建模方法

针对非线性摩擦特性对伺服系统建模的影响问题,通过适当的实验设计,利用优化方法来得到系统非线性摩擦模型以及系统模型参数.实验结果表明,利用该方法可以得到与实际系统模型参数较为接近的对象模型参数.