皖南机床数控龙门铣床用途与特点

黄山皖南机床生产的数控龙门铣床主要用于各种模具制造、各种基础大件、壳体件等多品种零件的加工,工件一次装夹后可自动高效、高精度地连续完成铣、镗、铰、攻丝等多种工序的加工.适用于汽车模具、重型机械、机车、造船、发电、机床、印刷、轻纺、航空航天等制造行业,配备多功能铣头后,可对工作进行五面体加工,以及对各种复杂型面进行三坐标加工.该机床主要有以下特点.     

Optimization of imperfect stiffened cylinders under destabilizing loads

A design procedure is outlined for optimizing stiffened, thin circular, cylindrical shells subject to a given set of destabilizing loads, in the presence of a specified initial geometric imperfection. The procedure incorporates two distinct steps (a) optimization based on linear buckling analyses and (b) imperfection sensitivity studies of the optimum design point from (a) as well as of the surrounding design space. A comparison of all these designs yield the true optimum in the presence of the specified geometric imperfection. The present methodology is fully demonstrated through two illustrative examples, one dealing with an axially loaded stiffened cylinder and one with a torsionally loaded one.     

Gathering news from space

Developments in remote-sensing technology have prompted suggestions that the news media could soon make routine use of newsgathering from space. A satellite system dedicated to this purpose (a ‘Mediasat’) could supply critical information. Government policy makers, however, fear that the media's use of such technology could affect national security, foreign relations and personal privacy. This article assesses US government policy on current and future newsgathering from space, and the technical potential for a Mediasat system. The authors raise doubts about the commercial viability of Mediasat, and point out that existing media sources already provide information on news stories. They conclude that concerns over the use of data from space will have to be met on a case-by-case basis as the media gain experience, using the same criteria now applied to balance the right of freedom of information with the need for national security.     

Leadership in space transportation

Rather than aiming at overall preemenence in space, as in the past, it is important for the USA now to specify goals and objectives for its space programme. In the space transportation market, the USA faces long-term competition. Planned properly, the Space Shuttle, Space Station and transfer stages can be used as a unique transport system, forcing other suppliers to compete on US terms. Such a total transport service system could also include ELV support. In entering into international space agreements, the government must take into account the objective of maintaining the competitiveness of the US commercial sector.     

石墨渗铜喉衬的烧蚀特性

介绍了石墨渗铜材料作为固体火箭发动机(SRM)喉衬与．长尾管衬套的烧蚀特性和机理。液态铜在高温高压燃气的作用下仍滞留在石墨基材内，起到抑制烧蚀的效果，改善了KS-8高强石墨的耐烧蚀性能。     

推进剂功能组分作用研究(Ⅳ)--工艺/力学性能

在丁羟/铝粉/高氯酸铵组成的三组元推进剂体系中,通过药浆流变性测试、动态力学分析（DMA）、单向拉伸性能、凝胶分数和相对交联密度的测定,研究了一些功能组分如氮丙啶类化合物MAPO、醇胺络合物TEA·BF3、胺类化合物H对推进剂工艺性能和力学性能的影响.结果表明,MAPO可以降低药浆屈服值和表观粘度,改善工艺性能,显著增加最大抗拉强度,但对最大伸长率无影响;TEA·BF3大幅度增加药浆屈服值,使工艺性能变差,一定程度上提高最大抗拉强度和发挥熵弹性而增加最大伸长率,H可以显著改善推进剂工艺性能和增加最大伸长率.文中还对功能组分在推进剂中的作用机理进行了分析探讨.     

丁羟推进剂粘合剂网络结构调控方法探讨

把扩链剂的使用作为调整丁羟推进剂粘合剂网络及其形态结构的一个重要手段。采用扩链剂、交联剂和真实固化参数(Rt)等综合的方法调控丁羟推进剂性能,可望比单纯控制名义固化参数(Ro)获得更好的力学性能及其稳定性。推导了丁羟推进剂粘合剂系统网络调整的通用计算公式和各种特定条件下的计算公式。     

Determination of the Microacceleration Quasisteady Component onboard the International Space Station

A comparison of two methods of determination of the microacceleration quasisteady component arising onboard the International Space Station was performed. In the first method the acceleration was calculated using the relative motion of the station reconstructed on the basis of telemetry data. The second method was a direct measurement of the microacceleration by a low-frequency accelerometer and a smoothing of the data obtained. The used measurements were made by the American accelerometer MAMS. The above comparison can theoretically be used to refine the position of the station center of mass relative to its body.     

Statistical Approach to the Evaluation of the Mean Correlation Length and the Propagation Velocity of Middle-Scale Plasma Structures in the Earth's Foreshock

Based on simultaneous measurements of ion fluxes made onboard the closely separated satellites Interball-1and Magion-4, the propagation velocity of middle-scale plasma structures in the Earth's foreshock relative to the solar wind flow is estimated. The derived value of this velocity allows these structures to be identified as a fast magnetosonic wave propagating upstream of the solar wind inflowing the Earth's bow shock. An evaluation is also made of the correlation length of these disturbances in the plane perpendicular to the Sun–Earth line. This length is approximately equal to 2R _E.     

输油管道泄漏自动检测装置的研制

介绍一种基于软件的管道泄漏自动检测装置 ,通过检测压力、流量、温度等的变化来判断泄漏是否发生及发生泄漏的位置。该装置具有适应性广、安装简单等优点。