The status of qualification of a new separator system for advancedaerospace battery cells

A nickel cadmium cell system which utilizes a polypropylene separator impregnated with polybenzimadazole, and which shows promise of providing an aerospace battery with performance equivalent to Super NiCd, and yet is more cost effective, is described. Background information, cell construction information, detailed test program information and data, and status of qualification are given     

Pattern recognition of star constellations for spacecraftapplications

A software system for a star imager for on-line satellite attitude determination is described. The system works with a single standard commercial CCD-camera with a high aperture lens and an onboard star catalogue. It is capable of both an initial course attitude determination without any prior knowledge of the satellite orientation and a high-accuracy attitude determination based on prediction and averaging of several identified star constellations. In the high accuracy mode the star imager aims at an accuracy better than 2 arc sec with a processing time of less than a few seconds. The star imager is developed for the Danish microsatellite Oersted     

Digital system design in the presence of single event upsets

The authors consider the effects of single event upsets (SEUs) on digital systems, and show techniques for designing reliable systems with current levels of SEU protection. Three main systems are discussed: main memory, logic, and cache memory. A design for the main and cache memory subsystems that are SEU protected is also described. With SEU defined in bit days p, and using single error correction, it is shown that for all subsystems considered, an effective upset rate which is proportional to the product of p² and the time between corrections, or scrub time, can be obtained. Data for memory chip size and performance derived from the gallium-arsenide (GaAs) pilot lines funded by the Defense Advanced Research Projects Agency (DARPA) throughout the 1980s are used     

Crustaceans as a model for microgravity-induced muscle atrophy.

Atrophy of skeletal muscles is a serious problem in a microgravity environment. It is hypothesized that the unloading of postural muscles, which no longer must resist gravity force, causes an accelerated breakdown of contractile proteins, resulting in a reduction in muscle mass and strength. A crustacean model using the land crab, Gecarcinus lateralis, to assess the effects of spaceflight on protein metabolism is presented. The model is compared to a developmentally-regulated atrophy in which a premolt reduction in muscle mass allows the withdrawal of the large claws at molt. The biochemical mechanisms underlying protein breakdown involves both Ca(2+)-dependent and multicatalytic proteolytic enzymes. Crustacean claw muscle can be used to determine the interactions between shortening and unloading at the molecular level.     

The heliosphere

The history and current status of heliospheric physics are outlined very briefly. It is emphasized that the existing Voyager Interstellar Mission should go a long way to answering many of the outstanding questions during the next one or two decades, especially those concerning the nature and structure of the solar wind termination shock.     

Evolution of the Martian water cycle.

The current Martian water cycle is extremely asymmetric, with large amounts of vapor subliming off a permanent north polar water ice cap in northern summer, but with no apparent major source of water vapor in the southern hemisphere. Detailed simulations of this process with a three-dimensional circulation model indicate that the summertime interhemispheric exchange (Hadley cell) is very much stronger than transport by eddies in other seasons. As a result, water ice would be distributed globally were it not for the buffering action of regolith soil adsorption which limits the net flux of water vapor off the north polar cap to amounts that are insignificant even on the scale of thousands of years. It has been suggested that the polar layered deposits are the result of exchange on these long time scales, driven by changes in Martian orbital parameters. We therefore are conducting simulations to test the effect of varied orbital parameters on the Martian water cycle. We find that when the perihelion summer pole is charged with a polar water ice cap, large quantities of water are quickly transfered to the aphelion summer pole, setting up an annual cycle that resembles the present one. Thus, the adsorptivity of the Martian regolith may be in the narrow range where it can limit net transport from the aphelion but not the perihelion pole.     

A system for obstacle detection during rotorcraft low altitudeflight

An airborne vehicle such as a rotorcraft must avoid obstacles like antennas, towers, poles, fences, tree branches, and wires strung across the flight path. Automatic detection of the obstacles and generation of appropriate guidance and control actions for the vehicle to avoid these obstacles would facilitate autonomous navigation. The requirements of an obstacle detection system for rotorcraft in low-altitude Nap-of-the-Earth (NOE) flight based on various rotorcraft motion constraints is analyzed here in detail. It is argued that an automated obstacle detection system for the rotorcraft scenario should include both passive and active sensors to be effective. Consequently, it introduces a maximally passive system which involves the use of passive sensors (TV, FLIR) as well as the selective use of an active (laser) sensor. The passive component is concerned with estimating range using optical flow-based motion analysis and binocular stereo. The optical flow-based motion analysis that is combined with on-board inertial navigation system (INS) to compute ranges to visible scene points is described. Experimental results obtained using land vehicle data illustrate the particular approach to motion analysis     

A low-cost space-based radar system concept

A space-based radar system concept is described that can provide continuous world-wide, all-weather, day-night observation and tracking of ships, aircraft, vehicles and ground facilities of interest. The system employs a constellation of radar satellites in low-earth orbit to provide continuous world-wide target access. The radars employ reflector antennas, TWT transmitters and high frequency (e.g., X band) to achieve long range with relatively low weight, complexity and cost. The radars operate in moving-target-detection (MTD) and synthetic-aperture-radar (SAR) spotlight imaging modes to observe moving and fixed targets, respectively. The system could support a wide range of military, intelligence, law-enforcement and civilian missions     

Electronically steerable plasma mirror based radar-concept andcharacteristics

An alternative to using a phased array to steer a radar beam is to electronically control the orientation of an inertialess broadband microwave reflector. Recent experiments have demonstrated that a planar plasma mirror immersed in a magnetic field can be formed with electron densities high enough to reflect X-band microwave beams. A plasma mirror performs like a metal mirror, but it is inertialess. Compared to high performance phased array systems, a plasma mirror based radar system is much simpler and is therefore more affordable. Electronic steering of microwave beams using a plasma mirror permits the use of wide instantaneous bandwidth waveforms. Potential areas of application for a plasma mirror based antenna system include ship self-defense, high-resolution radar imaging, target identification, electronic countermeasures, high data rate communications, spread spectrum links and remote sensing. As a reflector, the plasma mirror exhibits extremely low loss and the reflectivity is very nearly 100%. Since a perfectly reflecting object cannot radiate, the noise temperature contribution of the plasma mirror to the antenna temperature is likely to be small. The plasma sheet can be steered in elevation by tilting the magnetic field, and steering in azimuth may be accomplished by designating cathode initiation sites. Switching times between successive mirror orientations may be less than 20 μs