Spectroscopic data and Stark broadening of Cu I and Ag I spectral lines: Selection and analysis

Optical emission and linear laser absorption spectroscopy techniques were used in investigation of plasma with copper and silver admixture. The method of selection of spectral lines and spectroscopic data with the aim of diagnostics of multicomponent air plasma with two metal vapors admixture was developed. Energy level populations behavior on the Boltzmann plot were used for Cu I and Ag I spectroscopic data selection. In this way the selection of spectroscopic data for some of Cu I and Ag I lines was realized. Stark broadening parameters of Cu I and Ag I were examined. Experimentally obtained temperature and electron density radial distributions were used in the calculation of plasma composition in the assumption of local thermodynamic equilibrium. Linear laser absorption spectroscopy was used to examine the state of plasma.     

Association of optical tracklets from a geosynchronous belt survey via the direct Bayesian admissible region approach

The direct Bayesian admissible region approach is an a priori state free measurement association and initial orbit determination technique for optical tracks. In this paper, we test a hybrid approach that appends a least squares estimator to the direct Bayesian method on measurements taken at the Zimmerwald Observatory of the Astronomical Institute at the University of Bern. Over half of the association pairs agreed with conventional geometric track correlation and least squares techniques. The remaining pairs cast light on the fundamental limits of conducting tracklet association based solely on dynamical and geometrical information.     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

Stochastic processes for line shapes and intensities

Stochastic processes provide flexible and fast calculations for modeling dynamical interactions between an atom and charged particles. We use a stochastic renewal process for the plasma microfield being the cause of Stark broadening. The accuracy and improvement possibilities of Lyman profiles calculations with a renewal process are analyzed by comparing to ab initio simulations for ion broadening only. Stochastic processes may also be applied to out of equilibrium plasmas. We present our first results for the effect of Langmuir waves on a line broadened by electrons only, and for the changes of atomic populations submitted to strong temperature fluctuations.     

Method for the prediction of the effective dose equivalent to the crew of the International Space Station

This paper describes a methodology for assessing the pre-mission exposure of space crew aboard the International Space Station (ISS) in terms of an effective dose equivalent. In this approach, the PHITS Monte Carlo code was used to assess the particle transport of galactic cosmic radiation (GCR) and trapped radiation for solar maximum and minimum conditions through an aluminum shield thickness. From these predicted spectra, and using fluence-to-dose conversion factors, a scaling ratio of the effective dose equivalent rate to the ICRU ambient dose equivalent rate at a 10 mm depth was determined. Only contributions from secondary neutrons, protons, and alpha particles were considered in this analysis.     

Signatures of strong geomagnetic storms in the equatorial latitude

Ionosonde data from two equatorial stations in the African sector have been used to study the signatures of four strong geomagnetic storms on the height – electron density profiles of the equatorial ionosphere with the objective of investigating the effects and extent of the effects on the three layers of the equatorial ionosphere. The results showed that strong geomagnetic storms produced effects of varying degrees on the three layers of the ionosphere. Effect of strong geomagnetic storms on the lower layers of the equatorial ionosphere can be significant when compared with effect at the F2-layer. Fluctuations in the height of ionization within the E-layer were as much as 0% to +20.7% compared to −12.5% to +8.3% for the F2-layer. The 2007 version of the International Reference Ionosphere, IRI-07 storm-time model reproduced responses at the E-layer but overestimated the observed storm profiles for the F1- and F2-layers.     

Investigation of ionospheric response to two moderate geomagnetic storms using GPS–TEC measurements in the South American and African sectors during the ascending phase of solar cycle 24

The responses of the ionospheric F region using GPS–TEC measurements during two moderate geomagnetic storms at equatorial, low-, and mid-latitude regions over the South American and African sectors in May 2010, during the ascending phase of solar cycle 24, are investigated. The first moderate geomagnetic storm studied reached a minimum Dst value of −64 nT at 1500 UT on 02 May 2010 and the second moderate geomagnetic storm reached a minimum Dst value of −85 nT at 1400 UT on 29 May 2010. In this paper, we present vertical total electron content (VTEC) and phase fluctuations (in TECU/min) from Global Positioning System (GPS) observations from the equatorial to mid-latitude regions in the South American and African sectors. Our results obtained during these two moderate geomagnetic storms from both sectors show significant positive ionospheric storms during daytime hours at the equatorial, low-, and mid-latitude regions during the main and recovery phases of the storms. The thermospheric wind circulation change towards the equator is a strong indicator that suggests an important mechanism is responsible for these positive phases at these regions. A pre-storm event that was observed in the African sector from low- to the mid-latitude regions on 01 May 2010 was absent in the South American sector. This study also showed that there was no generation or suppression of ionospheric irregularities by storm events. Therefore, knowledge about the suppression and generation of ionospheric irregularities during moderate geomagnetic storms is still unclear.     

Study of the optical and mechanical properties of regolith with the ICAPS facility

Regoliths are a most important component of solar system bodies. The study of their formation and evolution depends upon measurements from orbiting spacecraft or Earth-based observations, and by the development of models addressing formation and evolution scenarios, physical properties and composition of the constituent materials. For asteroids and comets, recent measurements tend to confirm the idea of extremely low bulk densities. The porosity of the outermost regolith layers should thus reach very high values. Regolith formation and growth partly depends upon gravity and mechanical properties of its constituent particles, which are very poorly documented. Gravitational effects play an important role in the shaping processes of large bodies, while material strength properties are more important for smaller bodies. The understanding of both, aggregation processes of, and of light scattering from, such media, would strongly benefit from experiments led under microgravity, and provide insight into regolith formation processes: much lower collision and aggregation velocities can be achieved in a microgravity environment, leading to the formation of much fluffier aggregates than possible on Earth. ICAPS is a multi-year scientific programme to simulate cosmic and atmospheric particle systems on board the International Space Station. The ICAPS facility will allow to build simulated regolith and thus enable the study of their mechanical and optical properties. Measurements such as tensile strength, electrical and thermal conductivities, compressibility and porosity, will be made, as well as monitoring of collisions into such simulated regolith. The article discusses the ICAPS research plan for regolith studies and the facility current status.     

High resolution time profile of decimetric type-III bursts

Type-III bursts are signatures of the electron beams accelerated during the solar flares, their observation and investigation provide information of the acceleration processes, the characteristics of the exciting agent and the acceleration site. The Brazilian Solar Spectroscope (BSS), in operation at INPE, Brazil, have recorded type-III radio bursts in decimetric range (2050–2250 MHz) with high time resolution of 20 ms. Decimetric reverse drift bursts are possibly generated in a dense loop by electron beams travelling towards the photosphere. Hence their time profiles should carry signatures of the density inhomogenities in the loop. Here the temporal and spectral characteristics of decimetric type-III bursts are presented.     

Development and research program for a soil-based bioregenerative agriculture system to feed a four person crew at a Mars base.

For humans to survive during long-term missions on the Martian surface, bioregenerative life support systems including food production will decrease requirements for launch of Earth supplies, and increase mission safety. It is proposed that the development of "modular biospheres"--closed system units that can be air-locked together and which contain soil-based bioregenerative agriculture, horticulture, with a wetland wastewater treatment system is an approach for Mars habitation scenarios. Based on previous work done in long-term life support at Biosphere 2 and other closed ecological systems, this consortium proposes a research and development program called Mars On Earth(TM) which will simulate a life support system designed for a four person crew. The structure will consist of 6 x 110 square meter modular agricultural units designed to produce a nutritionally adequate diet for 4 people, recycling all air, water and waste, while utilizing a soil created by the organic enrichment and modification of Mars simulant soils. Further research needs are discussed, such as determining optimal light levels for growth of the necessary range of crops, energy trade-offs for agriculture (e.g. light intensity vs. required area), capabilities of Martian soils and their need for enrichment and elimination of oxides, strategies for use of human waste products, and maintaining atmospheric balance between people, plants and soils.