光纤陀螺的温度实验与仿真分析

热致非互易相移的存在影响了光纤陀螺的工作精度.通过对热致非互易相移的分析,把握了该相移与光纤陀螺温度特性的关系.在此基础上,进行了光纤陀螺的温度实验与仿真分析.结果表明,仿真分析光纤陀螺的整体温度分布是可行的;温度实验与仿真分析相结合的办法有助于光纤陀螺温度特性的把握.     

异种金属材料磁脉冲焊接技术

通过对磁脉冲焊接技术结合机理的阐述,采用5A03Al-5A06Al、1050Al-AZ31Mg异种金属材料进行焊接试验.对所得的焊接接头进行气密性试验和剥离试验,检测其结合质量;结合光学显微镜,对比分析Al-Al、Al-Mg焊接接头的微观形貌特点;并采用SEM/EDS分析界面附近的元素分布;最后通过硬度试验,检测接头界...     

多孔质节流空气静压轴承静态性能实验研究

本文采用不锈钢多孔质材料研制了一种新的空气静压轴承,并对不同平均孔径的多孔质空气静压轴承以及一种表面复合节流空气静压轴承的承载能力和刚度进行了实验测试和分析,结果表明,选用合适的不锈钢多孔质材料以及适当的加工方法可以制造高承载能力与高刚度的空气静压轴承。     

The Magnetic Field of Mercury

The magnetic field strength of Mercury at the planet’s surface is approximately 1% that of Earth’s surface field. This comparatively low field strength presents a number of challenges, both theoretically to understand how it is generated and observationally to distinguish the internal field from that due to the solar wind interaction. Conversely, the small field also means that Mercury offers an important opportunity to advance our understanding both of planetary magnetic field generation and magnetosphere-solar wind interactions. The observations from the Mariner 10 magnetometer in 1974 and 1975, and the MESSENGER Magnetometer and plasma instruments during the probe’s first two flybys of Mercury on 14 January and 6 October 2008, provide the basis for our current knowledge of the internal field. The external field arising from the interaction of the magnetosphere with the solar wind is more prominent near Mercury than for any other magnetized planet in the Solar System, and particular attention is therefore paid to indications in the observations of deficiencies in our understanding of the external field. The second MESSENGER flyby occurred over the opposite hemisphere from the other flybys, and these newest data constrain the tilt of the planetary moment from the planet’s spin axis to be less than 5°. Considered as a dipole field, the moment is in the range 240 to 270 nT-R _M ³ , where R _M is Mercury’s radius. Multipole solutions for the planetary field yield a smaller dipole term, 180 to 220 nT-R _M ³ , and higher-order terms that together yield an equatorial surface field from 250 to 290 nT. From the spatial distribution of the fit residuals, the equatorial data are seen to reflect a weaker northward field and a strongly radial field, neither of which can be explained by a centered-dipole matched to the field measured near the pole by Mariner 10. This disparity is a major factor controlling the higher-order terms in the multipole solutions. The residuals are not largest close to the planet, and when considered in magnetospheric coordinates the residuals indicate the presence of a cross-tail current extending to within 0.5R _M altitude on the nightside. A near-tail current with a density of 0.1 μA/m² could account for the low field intensities recorded near the equator. In addition, the MESSENGER flybys include the first plasma observations from Mercury and demonstrate that solar wind plasma is present at low altitudes, below 500 km. Although we can be confident in the dipole-only moment estimates, the data in hand remain subject to ambiguities for distinguishing internal from external contributions. The anticipated observations from orbit at Mercury, first from MESSENGER beginning in March 2011 and later from the dual-spacecraft BepiColombo mission, will be essential to elucidate the higher-order structure in the magnetic field of Mercury that will reveal the telltale signatures of the physics responsible for its generation.     

Lithium Abundance in Pop.II Stars A post-HIPPARCOS discussion

The relation between the lithium abundance observed in Population II stars and the primordial abundance, is still an open question (see Cayrel and Duncan, this meeting). A few recent results are discussed. HIPPARCOS data show that the standard model of stellar evolution can explain the 6Li detection in HD 84937, suggesting a negligible depletion of 7Li. A slope in the Li/Teff relation for Pop II dwarfs and a spread of their Li abundance have been advocated, and both used as arguments in favor of Li depletion. The slope is not confirmed when two other independent temperature scales are used. The Li scatter around the plateau is hardly larger than the scatter predicted from determination errors. Hints from a scatter of Li in subgiants of the globular cluster M92 are not completely conclusive. The determination of more accurate Li abundances in the Pop II stars is an urgent but difficult task, requiring better model atmosphere (better convection treatment) and the help of observational data about Pop II stars (such as long base interferometry).     

The Time Structure of Ground Level Enhancements in?Solar Cycle 23

In a recent paper McCracken et al. (J. Geophys. Res. 113:A12101, 2008) proposed that the Ground Level Enhancement (GLE) of 20 January 2005 may have been produced by more than one acceleration mechanism, with the first acceleration due to the solar flare and the second one due to the CME associated with that event. They also noted several other GLEs with similar multiple pulse structures. This paper systematically investigates all the GLEs of solar cycle 23, from GLE 55 on 6 November 1997 to GLE 70 on 13 December 2006, to study their morphology and pulse structure, and to determine whether the multiple structures that may be found in these events are qualitatively similar to that of the GLE of 20 January 2005. We use all the data of all NMs that saw each event, to have as much directional and spectral information as possible. It is shown that three of these 16 events do contain such double-pulse structures, and the properties of these three are discussed in some detail.     

Ceramic ChemCam Calibration Targets on Mars Science Laboratory

The ChemCam instrument on the Mars Science Laboratory rover Curiosity will use laser-induced breakdown spectroscopy (LIBS) to analyze major and minor element chemistry from sub-millimeter spot sizes, at ranges of ～1.5–7?m. To interpret the emission spectra obtained, ten calibration standards will be carried on the rover deck. Graphite, Ti?metal, and four glasses of igneous composition provide primary, homogeneous calibration targets for the laser. Four granular ceramic targets have been added to provide compositions closer to soils and sedimentary materials like those expected at the Gale Crater field site on Mars. Components used in making these ceramics include basalt, evaporite, and phyllosilicate materials that approximate the chemical compositions of detrital and authigenic constituents of clastic and evaporite sediments, including the elevated sulfate contents present in many Mars sediments and soils. Powdered components were sintered at low temperature (800?°C) with a small amount (9?wt.%) of lithium tetraborate flux to produce ceramics that retain volatile sulfur yet are durable enough for the mission. The ceramic targets are more heterogeneous than the pure element and homogenous glass standards but they provide standards with compositions more similar to the sedimentary rocks that will be Curiosity’s prime targets at Gale Crater.     

Relativistic Reconnection and Particle Acceleration

This chapter mainly deals with magnetic reconnection and particle acceleration in relativistic astrophysical plasmas, where the temperature of the current sheet exceeds the rest mass energy and the Alfvén velocity is close to the speed of light. Magnetic reconnection now receives a great deal of interest for its role in many astrophysical systems such as pulsars, magnetars, galaxy clusters, and active galactic nucleus jets. We review recent advances that emphasize the roles of reconnection in high-energy astrophysical phenomena.     

Elemental Abundances in Coronal Structures

A great deal of evidence for elemental abundance variations among different structures in the solar corona has accumulated over the years. Many of the observations show changes in the relative abundances of high- and low-First Ionization Potential elements, but relatively few show the absolute elemental abundances. Recent observations from the SOHO satellite give absolute abundances in coronal streamers. Along the streamer edges, and at low heights in the streamer, they show roughly photospheric abundances for the low-FIP elements, and a factor of 3 depletion of high-FIP elements. In the streamer core at 1.5 R·, both high- and low-FIP elements are depleted by an additional factor of 3, which appears to result from gravitational settling. This revised version was published online in June 2006 with corrections to the Cover Date.     

皖南机床数控龙门铣床用途与特点

黄山皖南机床生产的数控龙门铣床主要用于各种模具制造、各种基础大件、壳体件等多品种零件的加工,工件一次装夹后可自动高效、高精度地连续完成铣、镗、铰、攻丝等多种工序的加工.适用于汽车模具、重型机械、机车、造船、发电、机床、印刷、轻纺、航空航天等制造行业,配备多功能铣头后,可对工作进行五面体加工,以及对各种复杂型面进行三坐标加工.该机床主要有以下特点.