Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

Effect of Observation Errors on Satellite Attitude Estimation

A study of the effect of observation errors on the best least squares estimate of satellite attitude based on two sets of direction measurements, where one set contains two independent measurements which are corrupted by zero-mean normally distributed additive errors, is summarized. Using Monte-Carlo techniques, the statistics of the estimated rotation of the satellite, from a known reference, were obtained. It was found that one of the parameterizations of the rotation, namely, the vector z, is best suited for estimation, since ?z is normally distributed with zero mean and its standard deviation is independent of the two direction measurements.     

A Test of the Effect of Satellite Spin on Two-Way Doppler Range-Rate Measurements

Analysis indicates that the rotation of a satellite can cause an error in the range-rate measurements of a two-way Doppler tracking system. The error is proportional to the rotation rate, and the constant of proportionality depends on the polarization of the satellite transponder antennas. Measurements made by ground-based simulation confirmed the analytical prediction.     

Theory of Operation of an Elastically Supported Tuned Gyroscope

Detailed derivation of the transfer function for a multigimbal, elastically supported, tuned gyro is presented and comparison made between its characteristics and those of a classical two-axis, free-rotor gyro. Knowledge of the gyro transfer function is necessary for the purpose of servo analysis of the system in which the gyro is used; also, the transfer function is a basis of evaluation of errors caused by angular inputs that occur at twice spin frequency.     

Tracking of DABS-Equipped Aircraft

The Discrete Address Beacon System (DABS) is scheduled to replace the Air Traffic Control Beacon System (ATCRBS) as the prime sensing tool for air traffic control in the 1980's. The design of DABS requires knowledge of the tracking accuracy obtainable as a function of various system parameters. In particular, the potential value of air-to-ground telemetry of turn-rate data and its effect on intermittent positive control (IPC) must be assessed. The design of DABS tracking algorithms is discussed, and the results obtained with a Kalman tracker simulation are given. The major finding is that turn-rate telemetry of moderate accuracy can improve tracking by a factor of 6 to 10.     

Landmark Navigation Rule, a New Navigation Device

Two new methods of landmark navigation were recently presented. The landmarks are assumed to be within sight of the navigator but with unknown positions. Both methods require computations which are time consuming when a computer is not available. This correspondence presents the concept of a new navigation device called ?landmark navigation rule? which eliminates all the computation effort required in both new methods. The device is simple in construction, lightweight, and consumes no power.     

National and Regional Grids

The title of this paper provides a point of departure for the broadest possible discussion of electric power transmission and presents an opportunity to comment on some misconceptions regarding power systems. The subject of transmission is discussed in terms of 1) the grid concept, 2) its system function, and 3) its probable future development and some of the problems facing such development.     

Report on the Geneva Space Telecommunications Conference? Broadcasting Aspects

The growth of the Intelsat Global Commercial Communications Satellite System, which provides the facilities used to exchange television programs among many countries of the world, is described. Service was initiated between North America and Western Europe in 1965. Currently, some 48 separate geographic areas throughout the world are interconnected by the Intelsat System. The unique air-transportable Earth terminal, developed by the General Electric Company, at the request of the television networks, to meet the special requirements for providing live television coverage in color of the Apollo recoveries at sea, will also be described.