New instrumentation for optical measuring of oxygen in gas or dissolved in liquids.

The optical oxygen sensor is a novel device for the determination of oxygen in gases or dissolved in liquids. It is based on the measurement principle of fluorescence quenching, which is completely different from that of polarographic oxygen sensors (today the most widespread devices of oxygen detection). The new instrument offers features and advantages, which render it not only a realistic alternative, but, for specific applications, make it superior to existing electrochemical methods. The system is based on low-cost semiconductor devices (light-emitting diodes, photodiodes, low-cost analogue and digital components) and new LED-compatible oxygen-sensitive membranes. The flow cell of the instrument may be thermostatted and the sensor can be calibrated by a simple two-point calibration procedure. The optical oxygen sensor is particularly suitable for measuring dissolved oxygen in respirometry, since no oxygen is consumed by the device and the signal is independent of sample flowrate or stirring speed. Typical fields of application are monitoring of oxygen in ground and drinking water, in process control in bioreactors and in breath gas and blood gas analysis.     

Injuries to plants from controlled environment contaminants.

The use of controlled environments is subject to problems from contaminants emitted from materials of the system and from plants. Many contaminants are difficult to identify because injurious dosages are very low, there is a lack of information on what compounds injure plants, because species and cultivars differ greatly in their sensitivity to injury and injury symptoms often are not distinctive. Plastics have been shown to emit many different volatile compounds. The compound, di-butyl phthalate, contained in certain flexible plastics, has been shown to be very toxic to plants. Other injuries have been produced by caulking compounds and bonded screening. Paints have been shown to release xylene that is toxic to plants. Steam for humidification can cause problems because of hydroxylamines and other compounds added to steam used for heating to control fungal growth in return lines. Mercury, from broken thermometers is a particular problem in growth chambers because small quantities can collect in cracks and slowly volatilize to slow growth of plants. Plants themselves release large quantities of volatile hydrocarbons, with ethylene being the commonly recognized chemical that can be damaging when allowed to accumulate. People release large quantities of carbon dioxide which can cause variations in the rate of growth of plants. Contaminant problems can be controlled through filtering of the air or ventilation with make-up air, however the potential for problems is always present and careful testing should be undertaken with the particular species and cultivars being grown insure that there are no toxic agents altering growth in each particular controlled environment being utilized.     

Large-size space laboratory for biological orbit experiments.

The study of space factors on living systems has great interest and long-term experiments during orbital flight will be important tool for increasing our knowledge. Realization of such experiments is limited by constraints of modern space stations. A new technology of large-size space laboratory for biological experiments has been developed on the basis of polymerization techniques. Using this technique there are no limits of form and size of laboratory for a space station that will permit long term experiments on Earth orbit with plants and animals in sufficient volume for creation of closed self-regulating ecological systems. The technology is based on experiments of the behavior of polymer materials in simulated free space conditions during the reaction of polymerization. The influences of space vacuum, sharp temperature changes and space plasma generated by galactic rays and Sun irradiation on chemical reaction were evaluated in their impact on liquid organic materials in laboratory conditions. The results of our study shows, that the chemical reaction is sensitive to such space factors. But we believe that the technology of polymerization could be used for the creation of space biological laboratories in Earth orbit in the near future.     

Use of combined light flash and plasma measurements to study hypervelocity impact processes

We present new measurements concerning generation of light flash during hypervelocity impacts. We use iron particles (10⁻¹³ to 10⁻¹⁷ kg) with velocities over the range 1 to 42 km/s impacting semi-infinite targets (aluminium and molybdenum). The main results of previous work in the field are found to be reproduced with some slight deviations. For iron projectiles with given mass and velocity the energy of the flash (normalized to mass) is proportional to velocity to the power of 3.5 for aluminium targets and 3.9 for molybdenum targets. The duration of the flash is of order 1 microsecond. Simultaneous measurements of the generation of impact plasma do not change this. The onset of plasma generation of the bulk target material does not affect the total light flash energy. We discuss the duration of the flash compared to a simple calculation of temperature in the target and plasma vs time.     

飞机超差结构疲劳寿命量化评定

依据美机实用手册介绍的疲劳寿命S-N方程,对超差结构疲劳寿命推导出了一个量化评定方程。并应用该方程对一些典型结构超差形式具体地进行了疲劳寿命量化评定。实践证明,用本文介绍的方法对超差结构疲劳寿命进行定量评定,不仅简捷明快,而且结果可靠。     

Molecular alterations in tumorigenic human bronchial and breast epithelial cells induced by high LET radiation.

Carcinogenesis is a multi-stage process with sequence of genetic events governing the phenotypic expression of a series of transformation steps leading to the development of metastatic cancer. In the present study, immortalized human bronchial (BEP2D) and breast (MCF-10F) cells were irradiated with graded doses of either 150 keV/micrometer alpha particles or 1 GeV/nucleon 56Fe ions. Transformed cells developed through a series of successive steps before becoming tumorigenic in nude mice. Cell fusion studies indicated that radiation-induced tumorigenic phenotype in BEP2D cells could be completely suppressed by fusion with non-tumorigenic BEP2D cells. The differential expressions of known genes between tumorigenic bronchial and breast cells induced by alpha particles and their respective control cultures were compared using cDNA expression array. Among the 11 genes identified to be differentially expressed in BEP2D cells, three (DCC, DNA-PK and p21(CIP1)) were shown to be consistently down-regulated by 2 to 4 fold in all the 5 tumor cell lines examined. In contrast, their expressions in the fusion cell lines were comparable to control BEP2D cells. Similarly, expression levels of a series of genes were found to be altered in a step-wise manner among tumorigenic MCF-10F cells. The results are highly suggestive that functional alterations of these genes may be causally related to the carcinogenic process.     

Scanning, Tracking, and Mapping State Variable Estimation Algorithms

Recursive state equation estimation algorithms are derived to determine optimal estimation error covariance and state estimate for a linear dynamic system, driven by time-varying and positionverying (or angle-varying) functions whose a priori covariance are described. Retracing the same trajectory with the system measuring device causes the position varying function to repeat and can significantly reduce estimation errors. Applications for these algorithms include improving accuracy of a position dependent quantity to be mapped, or recursively processing radar or sonar data from repeating scans over the same area. Three types of return path patterns are considered: 1) multiple independent returns, 2) reverse returns, and 3) cyclical returns.     

光敏元件与光传感器的市场动态和发展

介绍了光敏元件与光传感器技术的发展及在国民经济和军事领域中的重要怍用；分析了国内外光电子产业的市场动态与发展趋势；论述了我国光电子产业面临的机遇和挑战。