The Freja ultraviolet imager

Auroral images acquired by satellite instrumentation have proven to be a crucial component of the scientific equiry into the physical processes of the Earth's magnetosphere. TheFreja mission provided an opportunity to extend these measurements into the temporal and spatial regime commonly associated with ground-based optical imagers. Employing the basic procedure used successfully in theViking program allowed image repetition rates of 6 s to be achieved with simultaneous exposure of all pixels within the field-of-view. Typical exposure times of 0.3 s required development of an improved image intensifier system and operational requirements resulted in image formats covering approximately one-third of a spin. Simultaneously exposing two broad-band UV cameras, the instrument generates in its normal operational mode 264.6 kbytes per image pair. Results from initial operations confirm the design approach and suggest such imagers can be routinely included on challenging low cost missions such asFreja.     

质量管理体系建设必须与企业发展战略相适应

提出了质量管理体系建设中存在的问题和解决途径,对不同企业发展战略的质量管理体系进行了比较,指出了质量管理体系建设必须与企业发展战略相适应。     

激光气体氮化参量对TA2钛合金表面形态和硬度的影响

激光气体氮化TA2钛合金时,氮化区表面形态和硬度受激光加工参量影响很大。在不同的激光氮化参量作用下,氮化区内熔体的对流形式和程度不同,使TA2钛合金表面形态呈现不同的特征。激光氮化后,TA2钛合金表面硬度提高。氮化区域内生成硬质相TiN是TA2钛合金表面硬度得到提高的主要原因。     

液冷头盔致冷效能的医学研究

在45℃高温条件下,应用液冷头盔给10名被试者的头颈部致冷,散热效能较高,可带走安静时30.9％～48.3％的代谢产热。降低身体的热蓄积,减少出汗,减慢心率、直肠温度和皮肤温度的上升速率。对头颈部致冷可降低身体的热紧张度50％～70％,明显改善对温热的舒适感觉。同时表明,致冷液温、流量及液流走向,对致冷效能均有显著影响。为液冷头盔及致冷装置的设计,提供了医学实验依据。     

Rationale for the development of the UK defence standards forsafety-critical computer software

Changes in the procurement environment and developments in technology that will require the adoption of new development certification procedures within the next few years are examined. Characteristics of safety-critical computer systems and the safety problems posed by digital computers are described. The way in which the changes have influenced the preparation of the new draft defence standards offered for public debate in the UK prior to their formal adoption by the Ministry of Defence is discussed. Principle features of the future safety-critical systems policy are outlined. The use of Ada for safety-critical software is considered     

Improved tracking of maneuvering targets: The use of turn-ratedistributions for acceleration modeling

Tactically maneuvering targets are difficult to track since acceleration cannot be observed directly and the accelerations are induced by human control or an autonomous guidance system therefore they are not subject to deterministic models. A common tracking system is the two-state Kalman filter with a Singer maneuver model where the second-order statistics of acceleration is the same as a first-order Markov process. The Singer model assumes a uniform probability distribution on the targets acceleration which is independent of the x and y direction. In practice, it is expected that targets have constant forward speed and an acceleration vector normal to the velocity vector, a condition not present in the Singer model. The work of Singer is extended by presenting a maneuver model which assumes constant forward speed and a probability distribution on the targets turn-rate. Details of the model are presented along with sample simulation results     

High Dynamic GPS Receiver Using Maximum Likelihood Estimationand Frequency Tracking

A new high dynamic global positioning system (GPS) receiver ispresented and its performance characterized by analysis,simulation, and demonstration. The demonstration receiver is abreadboard model capable of tracking a single simulated satellitesignal in pseudorange and range rate. Pseudorange and range rateestimates are made once every 20 ms, using a maximum likelihoodestimator, and are tracked by means of a third-order fadingmemory filter in a feedback configuration. The receiver trackspseudorange with rms errors of under 1 m when subjected tosimulated 50 g, 40 g/s circular trajectories. The tracking thresholdis approximately 28 dB·Hz, which provides 12 dB margin relativethe the minimum specified signal strength, assuming 3.5 dB systemnoise figure and 0 dB antenna gain.     

Use of combined light flash and plasma measurements to study hypervelocity impact processes

We present new measurements concerning generation of light flash during hypervelocity impacts. We use iron particles (10⁻¹³ to 10⁻¹⁷ kg) with velocities over the range 1 to 42 km/s impacting semi-infinite targets (aluminium and molybdenum). The main results of previous work in the field are found to be reproduced with some slight deviations. For iron projectiles with given mass and velocity the energy of the flash (normalized to mass) is proportional to velocity to the power of 3.5 for aluminium targets and 3.9 for molybdenum targets. The duration of the flash is of order 1 microsecond. Simultaneous measurements of the generation of impact plasma do not change this. The onset of plasma generation of the bulk target material does not affect the total light flash energy. We discuss the duration of the flash compared to a simple calculation of temperature in the target and plasma vs time.