A DORIS determination of the absolute velocities of the Sorsdal and Mellor glaciers in Antarctica

The Lambert–Amery System is the largest glacier–ice shelf system in East Antarctica, draining a significant portion of the ice sheet. Variation in ice sheet discharge from Antarctica or Greenland has an impact on the rate of change in global mean sea level; which is a manifestation of climate change. In conjunction with a measure of ice thickness change, ice sheet discharge can be monitored by determining the absolute velocities of these glaciers.     

Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

Solar activity dependence of total electron content derived from GPS observations over Mbarara

Vertical total electron content (VTEC) observed at Mbarara (geographic co-ordinates: 0.60°S, 30.74°E; geomagnetic coordinates: 10.22°S, 102.36°E), Uganda, for the period 2001–2009 have been used to study the diurnal, seasonal and solar activity variations. The daily values of the 10.7 cm radio flux (F_10.7) and sunspot number (R) were used to represent Solar Extreme Ultraviolet Variability (EUV). VTEC is generally higher during high solar activity period for all the seasons and increases from 0600 h LT and reaches its maximum value within 1400 h–1500 h LT. All analysed linear and quadratic fits demonstrate positive VTEC-F_10.7 and positive VTEC-R correlation, with all fits at 0000 h and 1400 h LT being significant with a confidence level of 95% when both linear and quadratic models are used. All the fits at 0600 h LT are insignificant with a confidence level of 95%. Generally, over Mbarara, quadratic fit shows that VTEC saturates during all seasons for F_10.7 more than 200 units and R more than 150 units. The result of this study can be used to improve the International Reference Ionosphere (IRI) prediction of TEC around the equatorial region of the African sector.     

A mission template for exploration and damage mitigation of potential hazard of Near Earth Asteroids

The Apophis Exploratory and Mitigation Platform (AEMP) concept was developed as a prototype mission to explore and potentially deflect the Near Earth Asteroid (NEA) 99942 Apophis. Deflection of the asteroid from the potential 2036 impact will be achieved using a gravity tractor technique, while a permanent deflection, eliminating future threats, will be imparted using a novel albedo manipulation technique. This mission will serve as an archetypal template for future missions to small NEAs and could be adapted to mitigate the threat of collision with other potential Earth-crossing objects.     

Progress in basic space science education and research: The UNBSSI

This report describes recent progress in the UN Basic Space Science Initiative (UNBSSI), which aims to facilitate space science education and research, and attendant resources in developing countries. In addition to holding workshops across the developing world, the UN Committee on the Peaceful Uses of Outer Space (COPUOS) successfully implemented the International Heliophysical Year (IHY) as a catalyst for improving understanding of the Sun and of solar-terrestrial physics. Building on this it is now preparing for the International Space Weather Initiative (ISWI). Achievements of the former are discussed, as are the goals and anticipated activities of the latter.     

The conundrum of software estimation models

There are many sophisticated models and methods for estimating the size, cost, and schedule of software projects. However, the ability to accurately estimate software cost, size, or schedule is still dubious. In general, the predictive accuracy of models for estimating software development cost and schedule has not been shown to be better than “within 25 percent of actual cost or schedule, about one half of the time”, especially for Department of Defense software efforts. The same is true for software size estimating models and methods, although there are some studies that have shown superior results. For software support (or maintenance) cost estimation, no model has been demonstrated to be accurate. This paper presents a summary of efforts performed to date which demonstrate the accuracy (or lack thereof) of software models. The results of several studies in the areas of software development cost and schedule estimation, size estimation, and support cost estimation are presented to show what these models can and cannot do. Some ideas for improvement are also presented, including the results of some studies which may lead to a resolution of the accuracy conundrum which currently exists     

Embedded information system re-engineering

Currently fielded embedded information systems face readiness challenges imposed by evolving missions and extended service lifespans. The ability to overcome these challenges is constrained by such factors as shrinking budgets, limited computational capacity and diminished manufacturing sources effects that impact both hardware and software options. Wholesale redevelopment is often cost prohibitive, particularly since large portions of embedded applications continue to fulfil mission requirements. Solutions must preserve prior investments while providing efficient pathways for continued technology refresh. A technology solution for affordable modernization of legacy system software is being development. The Embedded Information System Re-engineering (EISR) project is developing an automation-assisted JOVIAL-to-C re-engineering capability that permits simultaneous modernization of both the structure and source language of legacy embedded applications. Engineers will be able to apply the proven labor-saving visualization and analysis features of modern CASE tools to legacy JOVIAL applications. EISR will thus allow the DoD to recapture previous investments in proven legacy algorithms and mission capabilities while permitting the full exploitation of COTS economies of scale. This paper describes in brief the goals and objectives of the EISR project, and provides the current status of the EISR capability.     

Bipolar nickel-metal hydride batteries for aerospace applications

Electro Energy Inc. (EEI) is developing high power, long life, bipolar nickel-metal hydride batteries for aerospace applications. Bipolar nickel-metal hydride designs allow for high energy and high power designs with a 25 percent reduction in both weight and volume as compared to prismatic and/or cylindrical Ni-MH designs. Utilizing a sealed wafer cell design EEI has demonstrated a 1.2 kW/kg power capability. Prototype designs have achieved 70 Wh/kg. Designs studies show 80 Wh/kg are achievable with EEI's state-of-the-art technology. The sealed wafer cell is the building block for EEI's high power and high voltage bipolar batteries making the assembly easy and significantly lower in cost. Satellite and aircraft batteries are being developed which provide high power and long life. Sealed cells now show excellent rate capability and life. Cells tested in a low earth orbit (LEO) cycle have reached 9000 cycles and continue on test. High power, bipolar battery designs are ideal in applications where using conventional aerospace battery technology would require excessive capacity; weight and volume, thereby reducing usable payload on the vehicle     

Markets and Models for Large-Scale Courseware Development

Computer-aided instruction (CAI) has not achieved widespread use, even though experimental results have been promising, because of a complex of technical, economic, and social factors. The problems these factors produce might be overcome if a major ?market success? could be achieved with CAI systems. One potentially high-volume market, having probably a lower resistance to profound innovation than other sectors of education, is the junior college. To achieve a market success which would catalyze public and private investment to sustain the growth and dissemination of CAI requires technical solutions in the areas of hardware, software, and courseware. Courseware is a term designating the applications programs for CAI systems and associated textual, audio-visual, and other materials of instruction. Two different approaches to the production of courseware and their underlying philosophies are discussed and contrasted. The extent to which these different models of courseware design and development might lead toward the goal of mass dissemination is highlighted.     

National and Regional Grids

The title of this paper provides a point of departure for the broadest possible discussion of electric power transmission and presents an opportunity to comment on some misconceptions regarding power systems. The subject of transmission is discussed in terms of 1) the grid concept, 2) its system function, and 3) its probable future development and some of the problems facing such development.