A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

50–200 GV cosmic rays at various heliolatitudes

We consider regular motion of 50 – 200 GV particles in a large-scale interplanetary magnetic field model which contains a wavy neutral sheet responsible for the sector-structure. Numerical calculations based upon energy losses along various trajectories are carried out to obtain the predicted omni-directional density and anisotropy of cosmic rays at various solar latitudes. A marked difference is found between odd and even solar cycles. The post-1969 field configuration gives small radial and large latitudinal gradient: cosmic ray density increases toward the poles. The latitudinal gradient turns out smaller and of opposite sense for the pre-1969 epoch. Anisotropy changes dramatically as we move off the solar equator: corotation appears to be restricted to low latitudes.     

Performance Degradation of MTI Circuits Due to Amplitude Limiting

The loss in output signal-to-noise ratio (SNR) due to amplitude limiting is obtained for a radar circuit consisting of a bandpass limiter, coherent demodulator, matched filter, and moving-target-indicator (MTI) filter. The circuit is used in scanning MTI radars. The tandem connection of the limiter and coherent demodulator is a model for the saturation of the intermediate-frequency (IF) demodulator of an MTI radar. Results on special functions are used to obtain simple formulas for the loss in output SNR relative to a linear IF demodulator when the input SNR is less than -15 dB and the number of hits per 3-dB beamwidth exceeds 15.     

ELF radio signals produced in the auroral ionosphere by non-linear demodulation of signals from high-power amplitude-modulated transmitters

ELF and VLF radio signals were recorded in the afternoon to early morning (local time) between 24 March and 4 April 1979, in Northern Scandinavia. Apart from signals of natural origin, timing signals, i.e. six pips of equal duration of 105 ± 8 ms, at 1 kHz ± 0.5 Hz, were observed on the hour UT. Such signals only occur on days of relatively high geomagnetic activity during enhanced auroral electrojet activity. They are believed to be generated by non-linear demodulation (self-detection) of signals from two or more amplitude modulated transmitters in the USSR, operating at 173, 200, 236, 263 and 657 kHz. The simplest explanation for the observations is provided by the three transmitters operating at 173 kHz.     

Theoretical consideration of the chemical pathways for radiation-induced strand breaks.

A theoretical approach to the understanding of the biochemical mechanisms of indirect action of ionizing radiation on SV40 DNA in aqueous solution is presented. The extent of OH attack on the sugar moiety and bases has been calculated. A realistic model for the DNA (in B form) based on available X-ray diffraction data is used and specific reaction sites for the OH radicals are obtained. A Monte Carlo scheme is used to follow the diffusion and reaction of the OH radicals. Effects of track structure have been considered and the single strand break D37 values for 14 MeV electrons (low-LET) and 670 MeV/u and 40 MeV/u neon particles are presented. Calculated results are in agreement with available experimental data. It has been found that regardless of the qualities of radiation, 80% of the OH attack on DNA is on the bases and 20% is on the deoxyribose. From probability considerations only, it appears that the number of double strand breaks varies linearly with dose.     

Electromagnetic containerless undercooling facility and experiments for the shuttle

An electromagnetic furnace is being prepared for flights aboard the space shuttle. This apparatus is capable of melting metals and alloys up to 1400°C melting point by induction heating with subsequent solidification of the freely levitated melt without contact with any container. The solidification can be carried out with greatly reduced fields resulting in minimal heating and stirring of the free melt. Sequential specimens can be processed during flight. Several experiments are planned for a series of flights, beginning in 1985 with an undercooling experiment on NiSn alloys. These will be interspersed with detailed studies of fluid flow caused by low and high field levels in order to quantify the corresponding effect upon the solidification process.