Prebiotic oligodeoxynucleotide synthesis in a cyclic evaporating system at low temperatures.

Deoxynucleoside 5'-monophosphates were condensed by cyanamide or by l-ethyl-3-(3-dimethylaminopropyl) carbodiimide in the presence of ammonium chloride at 0 degree, 37 degrees or 60 degrees C through several cycles of evaporation to dryness with replenishment of all reactants at each cycle. We found that at 37 degrees or 60 degrees cyanamide gives distinctly more high molecular weight material than does carbodiimide. Indeed, the yield of condensed products for the cyanamide reaction (dimers and higher oligomers) was found to be between 60 percent and 80 percent. The molecular weight distribution of the product shifts to higher molecular weights as cycling continues at 37 degrees or 60 degrees for both condensing agents. The water soluble carbodiimide gives higher yields of low molecular weight product but much lower yields of the higher molecular weight products. At 0 degree yields of high molecular weight product were low for both condensing agents. Results of characterization of the products demonstrate the synthesis of oligodeoxynucleotides including tetramers, with 3'-5' phosphodiester linkages.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Avionics data buses: an overview

An overview of military avionics data buses and their applications, with the emphasis on optical fiber networking techniques. The evolution of military avionics data buses is discussed. The development trend actually reflects an increasing demand on such data buses, which requires the change from low-speed to high-speed transmissions, from single-rate to dual-rate operations, and from centralized control to distributed control. Recent progress in military avionics networks is described.     

The sticking probability of a hydrogen atom on icy mantle.

In the present work, we investigate the sticking process of a hydrogen atom on the surface of dust grains. As a realistic model for the icy mantle of dust grains, we produced slab-shaped amorphous water ice with infinite area by classical molecular dynamics (MD) computational simulation using two-dimensional periodic boundary condition. The resulting amorphous water ice slabs at 10 K and 70 K were found to be in good agreement with the experimental high-density and low-density amorphous water ice, respectively. Then, we investigated the dynamical behaviors of an impinging H atom on the surface of it by MD simulations. The sticking probabilities of incident H atoms with several initial temperatures on 10 K and 70 K ice were obtained. It was found that most of H atoms colliding with the 10 K ice stuck on the surface of it. After having stuck, the impinging H atoms diffused on the surface of ice and became trapped in one of potential wells on the surface. The mobility of a H atom on the surface of the amorphous water ice was found to depend only upon the temperature of ice.     

Convective motions in liquid metals for material processings. Numerical simulation of oscillation regimes and effect of rotation

The paper is concerned with the numerical simulation and the analysis of some kinds of flow regimes which can develop in Bridgman and Czochralski systems for material processings. The flows in the liquid phase are investigated considering two-dimensional and axisymmetric models. The time-dependent regimes were studied for a zero-Prandtl-number fluid layer confined inside a two-dimensional cavity of aspect ratio (length-to-height) A=4, involving a stress-free upper surface and submitted to a horizontal temperature gradient. The range of Grashof number was varied up to the conditions at which the flow goes from oscillatory to chaotic type behaviours. The combined influence of the temperature gradients and of the rotations of the crucible and of the seed/crystal was investigated for a Czochralski model. The axisymmetric regimes were studied for a Pr_m=0.015 liquid melt confined inside a cylindrical crucible of aspect ratio (height-to-radius) A_m=2, and coupled to a viscous encapsulant liquid layer (10<Pr_e<1200) of aspect ratio A_e=0.5. A number of steady and (transient) time-dependent flow patterns are identified.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.     

An advanced flight control and navigation system implementation fortactical helicopters

US Army helicopters that will allow single-crewmember operability in tactical environments require a high degree of automation. A tightly integrated flight control and navigation system has been studied. An architecture is discussed which meets anticipated flight control and navigation requirements, at an acceptable weight, using techniques of functional and physical integration. The architecture maximizes the sharing of sensor and computational resources in a flight critical environment and uses modular equipment packaging, dual fault-tolerant tetrad ring-laser-gyro inertial measurement units, and triplex self-checking processor pair-based flight critical processing channels     

Organic chemistry by irradiation in space

The irradiation of grains and/or ices by particles from solar or stellar winds, as well as cosmic rays, induces the synthesis of molecular species. We have shown by in-situ infrared spectroscopy of irradiated samples that this chemistry may be responsible for the presence of organic compounds in a large variety of astrophysical sites such as: lunar and asteroidal regoliths, cometary nucleus, rings and satellites of outer planets, circumstellar shells, interstellar clouds. We present our experimental results concerning the nature and efficiency of C and N irradiation chemistries, and give plausible astrophysical implications.     

Thermoluminescent dose measurements on-board Salyut type orbital stations.

A small, vibration- and shock-resistant thermoluminescent dosemeter /TLD/ system--named PILLE--was developed at the Health Physics Department of the Central Research Institute for Physics, Budapest, to measure the cosmic radiation dose on board orbital stations. The first on-board measurements with this system were performed /by B. Farkas, the Hungarian astronaut/, on the Salyut-6 space station in 1980. The same instrument was used by other crews in the following years. Doses measured at different sites in Salyut-6 are presented. The dose rates varied from 0.07 to 0.11 mGy.day-1. After the first cosmic measurements, the system was further developed. The minimum detectable dose of the new TLD system is 1 microGy, i.e. less by on order of magnitude than that of the former system. The self-irradiation dose rate of the TLD bulbs is also reduced--by more than one order of magnitude--to 10 nGy.h-1, by the use of potassium-free glass for the bulb envelope. This new type of PILLE TLD system is currently on-board Salyut-7. The dose rates /0.12-0.23 mGy.day-1/ measured in 1983 are presented in detail.     

Dust motion in Jupiter's tilted magnetic field

We outline an analytical method for studying the motion of charged dust particles that orbit an oblate planet having a tilted, offset, dipolar magnetic field. Our computed trajectories closely mimic previous numerical results; equilibrium dust potentials must be less then 10 volts or the Jovian ring would be thicker than observed. We identify several $\text{Lorentz resonances}$, where the periods of components of the Lorentz force, as seen by a reference particle moving in the equatorial plane, match the particle's orbital period; several seem to be near observed features of the Jovian ring system.