Distributed flight control system using fiber distributed datainterface (FDDI)

The design of fault-tolerant distributed control systems is discussed. The application described is a generic flight control system (FCS) for a fighter aircraft. The system is designed for high redundancy and expandability to meet various requirements. The communication network is based on the fiber distributed data interface (FDDI), which provides a high level of electromagnetic interference resistance and reliability. The choice of fiber optic media also provides an extremely high bandwidth and tremendous growth capability for future communications needs. This study is not specific to FDDI or flight control systems. The methods and configurations presented should be applicable to many real-time control implementations     

High data rate applications of ACTS technology

The NASA Advanced Communications Technology Satellite (ACTS) program will conduct high-data-rate experiments that will be applicable to the emerging broadband services of the telephony market. The existing broadband integrated services digital network (BISDN) services and delivery method as defined by the International Consultative Committee for Telephone and Telegraph (CCITT) and satellites' role in provisioning those services are discussed. The ACTS experimental efforts are summarized     

Flutter analysis of an airfoil with bounded random parameters in incompressible flow via Gegenbauer polynomial approximation

The effects of parameter uncertainty on the flutter characteristics of a two-dimensional airfoil in an incompressible flow were investigated through Gegenbauer polynomial approximation. The uncertain parameters, such as the linear and cubic pitch stiffness coefficients are modeled as bounded random variables with λ-PDFs (probability density functions). With the aid of Gegenbauer polynomial approximation, the two-dimensional stochastic airfoil system is transformed at first into its equivalent deterministic one. Then the Hopf-bifurcation point is determined through the equivalent deterministic system, and the onset of the flutter, together with the flutter frequency against the probability density distribution parameter and the intensity of the random variable is explored. In addition, the ranges of the peak pitch and plunge responses against the flight speed and the PDFs of the peak pitch response are obtained. Numerical results show how the probability density distribution parameters and the intensities of random parameters affect the flutter onset speed, flutter angular frequency, the upper and lower boundaries of peak responses, and the PDFs of peak responses.     

Next generation test support systems for the aircraft life cycle

The objective of this paper is to present the experience of EADS in using a common test support system for integration and qualification testing, aircraft ground equipment (AGE), in-service software maintenance facilities (ISMF) and ground crew training. EADS uses its test support system AIDASS (Advanced Integrated Data Acquisition and Stimulation System) in different phases of the aircraft life cycle. AIDASS is comprised of a real-time front-end system and a standard PC for the user interface. The EADS test support system is used in almost all phases of the aircraft life cycle, for instance, for integration and verification testing, as aircraft ground equipment, for in-service software maintenance and training of ground crews. This test support system is used for the software maintenance in the TORNADO program at different airforces in Europe. The airforces also share test setups with industry     

MEMS Electronically Steerable Antennas for Fire Control Radars

Large apertures are of great benefit to applications that are prime powered limited as is found on aerostat and other airborne platforms. Electronically scanned array antennas are often proposed for these applications. However, increasing the aperture area with conventional array technology is met with prohibitive cost, weight, and prime power increases because of the dense spacing of phase shifters and/or active T/R modules. This discusses the recent development of RF MEMS (Microelectromechanical System) switch technology and the use of these switches in a Radanttrade lens configuration for arrays of approximately 10 m² at X-band. A proof-of-concept 0.4 m² MEMS Electronically Steerable Antenna (ESA) containing 25,000 MEMS switches has been successfully designed, fabricated, and tested. The 0.4 m² MEMS ESA was then integrated with an AN/APG-67 radar system to form the MEMS Demonstration Radar System. The MEMS Demonstration Radar System successfully detected both airborne and ground moving targets during a series of extensive radar demonstrations. This is believed to be the first large scale employment of MEMS switches in a scanning antenna and radar system. The low-cost, lightweight, and low power technology demonstrated can enable weight and power constrained platforms with electronic steering.     

Investigation of promising ceramic materials in discharge chambers of stationary plasma thrusters

The characteristics of the insulator wear process in the discharge chamber of a stationary plasma thruster (SPT) are analyzed. The results of studying the erosion resistance to ionic spraying of different ceramic compositions are presented. It is shown experimentally that the integral characteristics (the value of thrust and thrust efficiency) as well as the SPT lifetime can be improved in changing from the conventional hot-pressed boron silicate (BN + SiO₂) ceramics to the BN + Si₃N₄ ceramic compositions.     

Possibilities of parallel calculations in solving gas dynamics problems in the CFD environment of FLUENT software

The results of studying an incompressible gas flow field in a periodic element of the porous structure made up of the same radius spheres are presented; the studies were based on the solution of the Navier-Stokes equations using FLUENT software. The possibilities to accelerate the solution process with the use of parallel calculations are investigated and the calculation results under changes of pressure differential in the periodic element are given.     

A system for measuring the altitude-airspeed parameters of rotorcraft and very light flight vehicles

In this paper, a problem on measuring the altitude-airspeed parameters (AAPs) of rotorcraft and very light flight vehicles is considered. Some ways of improving systems used to measure the parameters of FV elements and units have been determined. Also suggested and substantiated are the principles and designs of the basic variants of these measuring systems as well as the algorithms of their operation.     

Voting fusion adaptation for landmine detection

This paper presents a voting fusion application for use with a remotely controlled multisensor vehicle platform for antitank landmine detection. Data from three landmine detection sensors mounted at the front of the vehicle enhance the probability of detection and, when combined via data fusion, limit the false alarm density to practical levels. The performance of the voting fusion scheme presented in this paper is contrasted with a heuristic data fusion approach developed by General Dynamics Canada.     

The J-MASS Marketplace: a new way for DoD to do business

It is current DoD policy to use commercial off-the-shelf software whenever it meets DoD requirements. The application of this policy to modeling and simulation has resulted in the concept of “The Joint Modeling and Simulation System (J-MASS) Marketplace.” J-MASS is designed as an Open Systems Architecture with the capability for the Simulation Support Environment (SSE) to be expanded by the addition of site specific software. In the “J-MASS Marketplace” industry will build commercial tools to work with J-MASS and individual organizations will license what they need for their particular site. The J-MASS SSE is a framework or backplane into which everything else plugs. A J-MASS product release would have the core capabilities, but the unique needs of various organizations would be satisfied by industry. This paper addresses how the J-MASS Marketplace could work and how compliance can be defined. It will outline opportunities for industry in both building software for the Marketplace and in defining the Marketplace concept