Economy of modular low-technology launch vehicles

The paper comprises an assessment of the design and the economics of so-called “low-cost” simple modular launch vehicles. It is shown that the performance is very marginal and that the cost per launch cannot compete with technically more advanced fully reusable vehicles. Especially a private-funded development cannot be amortized economically in case of an expendable launch vehicle.     

Motion sickness susceptibility during rotation at 30 rpm in free-fall parabolic flight

Free fall per se whether in parabolic or orbital flight may be regarded as a "partial" motion environment with respect to eliciting motion sickness, requiring an additional component to render this environment "complete" or stressful. Parabolic flight in toto falls in the category of a "complete" motion environment in that some persons became motion sick with head fixed and eyes closed. In the present experiment we selected subjects who were symptom free or nearly symptom free in the KC-135 with head fixed. All tests were conducted with the subject rotating at 30 rpm in a rotating litter chair, and comparisons were made between head-fixed and head-moving conditions (right-left) in the free-fall phase of parabolic flight and under simulated free-fall phases in the laboratory. With head fixed most subjects were insusceptible; with head moving left-right susceptibility was slightly higher in the laboratory than aloft. An additional comparison was made correlating susceptibility in the free-fall phases of parabolic flight with susceptibility to experimental motion sickness in Skylab. In both situations cross-coupled angular accelerations were generated by executing head and body movements out of the plane of rotation. In parabolic flight 9 of 15 subjects reached an endpoint just short of frank motion sickness. In the Skylab workshop all eight of the astronauts tested were symptom free at the end of the test. The explanation for the difference in susceptibility rests in two factors: (1) Basic susceptibility in free fall is lower than on the ground, and (2) in Skylab the astronauts who needed to adapt had achieved this goal prior to the first test on Mission-Day 8.     

On the structure of the floating zone in melting

Floating zone melting is used in crystal growth and purification of high melting materials. The use of a reduced gravity environment will remove the constraint imposed on the length of the zone by the hydrostatic pressure. The equilibrium of the floating zone may involve, (1) Hydrostatic forces, when the zone rotates as a whole. (2) Convective driving forces, when the zone is stationary but fluid property gradients appear. (3) Hydrodynamic forces, when some parts of the zone are set into motion with respect to others. The last effects are considered in this paper. The flow pattern of a floating zone held between two discs in relative motion is complicated, and thence the solution of the problem is difficult even assuming a constant property-newtonian liquid. Nevertheless, when a small parameter appears in the problem, the complete flow field can be split into zones where simple solutions are found. To illustrate this approach, the spin-up from rest of an initially cylindrical floating zone is considered with detail. Here the small parameter is the time elapsed from the impulsive starting of motion. Since the problem which has been considered, as well as some others which can be tackled by use of similar methods, concern the viscous layer close to either plate, they can be simulated experimentally in the ground laboratory with short floating zones. Procedures to produce these zones are indicated.     

红外隐身材料的研究进展

红外探测器的高度发展已使用于目标表面的热红外隐身材料成为飞行器隐身技术中的一个重要组成部分。但对这种材料的发展情况,以往的文献一向较少涉及。本文概括了这种材料的一般性能要求,较全面地评述了十余年来红外隐身材料研究中各主要方面的发展情况,并分析了一些重要材料品种的特点、性能水平、技术影响因素、存在的问题和发展趋势。     

The evolution of a serviceable EURECA

Within the European space platform program the EURECA is being established as a ground-based platform for short microgravity missions. The development towards a serviceable platform for longer, scientific missions is described. The plan of an advanced space-based platform for increasing payload demands is outlined. The platform design and the adaptation to scientific missions and servicing operations are investigated. The cost-effective utilization of the different platform types using new operational concepts is analyzed in parametric life cycle cost calculations for different payloads and mission scenarios.     

The European Astronaut Centre prepares for International Space Station operations

The European Space Agency (ESA) contribution to the International Space Station (ISS) goes much beyond the delivery of hardware like the Columbus Laboratory, its payloads and the Automated Transfer Vehicles. ESA Astronauts will be members of the ISS crew. ESA, according to its commitments as ISS international partner, will be responsible to provide training on its elements and payloads to all ISS crewmembers and medical support for ESA astronauts. The European Astronaut Centre (EAC) in Cologne has developed over more than a decade into the centre of expertise for manned space activities within ESA by contributing to a number of important co-operative spaceflight missions. This role will be significantly extended for ISS manned operations. Apart from its support to ESA astronauts and their onboard operations, EAC will have a key role in training all ISS astronauts on ESA elements and payloads. The medical support of ISS crew, in particular of ESA astronauts has already started. This paper provides an overview on status and further plans in building up this homebase function for ESA astronauts and on the preparation towards Training Readiness for ISS crew training at EAC, Cologne. Copyright 2001 by the European Space Agency. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. Released to IAF/IAA/AIAA to publish in all forms.     

A sulfur-based survival strategy for putative phototrophic life in the venusian atmosphere

Several observations indicate that the cloud deck of the venusian atmosphere may provide a plausible refuge for microbial life. Having originated in a hot proto-ocean or been brought in by meteorites from Earth (or Mars), early life on Venus could have adapted to a dry, acidic atmospheric niche as the warming planet lost its oceans. The greatest obstacle for the survival of any organism in this niche may be high doses of ultraviolet (UV) radiation. Here we make the argument that such an organism may utilize sulfur allotropes present in the venusian atmosphere, particularly S(8), as a UV sunscreen, as an energy-converting pigment, or as a means for converting UV light to lower frequencies that can be used for photosynthesis. Thus, life could exist today in the clouds of Venus.     

大型复合材料结构优化设计方法研究

建立了适合于大型复合材料结构的优化设计方法，该方法在复合材料结构有限元分析的基础上对复合材料结构进行优化设计。在建立有限元模型时应用了区域划分技术，然后对结构分两级进行优化：第一级是对结构的铺层角度进行优化。第二级对结构的铺层厚度进行优化。最后，以工字梁结构为例，进行了算法验证。     

Gravitational Interaction of Celestial Bodies and neutron flux bursts from Their Surfaces

The gravitational interaction between the Sun and the planetary solar system gives rise to the well-known tidal waves at the planets. The tidal wave originating in the Earth's crust perpetually transforms the microstructure of the Earth's crust leading to a variation of the concentration of natural radioactive gases in the terrestrial air and to changed conditions of their leakage to the Earth's atmosphere. These variations give rise to bursts of thermal and slow neutrons in the vicinity of the Earth's crust, because the radioactive gases are sources of energetic alpha particles that induce neutron production upon the interaction with the nuclei of elements of the Earth's crust and atmosphere. In this work, the idea of neutron production in the ground coat is extended to the other celestial bodies interacting with one another.