Reduced-order multiple model adaptive controller for flexiblespacestructure

The robustness of a moving-bank multiple model adaptive estimator/controller to order reduction in the controller design model is examined. It is shown that the adaptive mechanism and bank-moving logic are not confounded by the effects of unmodeled higher order modes of a large flexible spacestructure. Control characteristics are achieved that are essentially equivalent to those of an artificially informed benchmark controller     

Carbon dioxide and oxygen budgets of a plant cultural system in a CELSS--a case of cultivation of lettuce and turnips.

In order to collect basic data about CO2 and O2 budgets of a plant cultural system in a CELSS, the variation of the CO2 absorption rates of lettuce and turnips were observed during the growing period, under different conditions. The O2 release rates were deduced from the CO2 absorption rates multiplied by 32/44. As a result, when the light intensity, the photoperiod and the atmospheric CO2 concentration increased, the rates also increased. The effects on the turnips were more significant than those on the lettuce. Turnips at 310 micromoles/m2/s of PPFD, 24 hours of photoperiod and 1100 ppm of CO2 concentration grew most actively in the present experimental conditions. One turnip absorbed 32.3 g CO2 and released 23.5 g O2 for 6 days between 24 days and 30 days after sowing.     

Application of Gram-Schmidt algorithm to fully adaptive arrays

The Gram-Schmidt orthogonalization (GSO) algorithm has excellent numerical performance and is readily applicable to systolic implementations such as in a field of adaptive cancellation systems. A modified GSO algorithm for a fully adaptive array is proposed and computer simulations show that the proposed algorithm gives superior performance. A systolic implementation of the proposed GSO algorithm for fully adaptive array is presented. A feedback mode GSO algorithm for use with analog weights is also presented and has been shown to have excellent performance in the presence of weight errors     

ERS-1 radial position refinement by dual crossover analysis with TOPEX/Poseidon

Achieving orbital accuracies in the radial direction for ERS-1 commensurate with those for TOPEX/Poseidon is of utmost importance for the integration of the two altimeter data sets. This paper outlines a procedure whereby the radial orbit error for ERS-1 is recovered as a time series expansion in the form of a finite Fourier series with additional terms for atmospheric drag, solar radiation pressure, and initial state vector mismodelling. Using a least squares collocation method with constraints derived from the JGM2 gravity field co-variance matrix, the radial error is recovered using both dual crossovers and ERS-1 single satellite crossovers. Aggregate arcs are then used to derive the ERS-1 orbit error over the repeat period of 35 days. The results are presented in the improvement of fit in the dual crossover, ERS-1 crossover and altimetry data sets as well as the recovery of an altimeter bias for the two satellites.     

Problem of precision missile guidance: LQR and H/sup /spl infin// control frameworks

Addressed here is the precision missile guidance problem where the successful intercept criterion has been defined in terms of both minimizing the miss distance and controlling the missile body attitude with respect to the target at the terminal point. We show that the H/sup /spl infin// control theory, when suitably modified, provides an effective framework for the precision missile guidance problem. The existence of feedback controllers (guidance laws) is investigated for the case of finite horizon and non-zero initial conditions. Both state feedback and output feedback implementations are explored.     

Structure of the Venusian atmosphere from surface up to 100 km

The goal of this paper is to summarize the experimental data on the atmosphere of Venus obtained after 1985, when the VIRA (Venus International Reference Atmosphere) or COSPAR model was published. Among the most important results that have appeared since then are the following: measurements of the vertical temperature profile by the VEGA spacecraft with high precision and high altitude resolution; measurements made with balloons of the VEGA spacecraft; radio occultation measurements of Magellan, Venera-15, and Venera-16; and temperature profiles derived from the data of infrared spectrometry obtained by Venera-15. The new result as compared to VIRA is the creation of a model of the atmosphere in the altitude range 55 to 100 km dependent on local time. This model is presented in our paper in tabulated form.     

Numerical modelling of radiance of the presumed dust torus around Mars in the 0.350-1 μm spectral range

Currently conducted studies on modelling of scattered solar radiation in the 0.350-1.00 μm range along the Phobos orbit around Mars are presented. Our calculations include various types of grains, various densities and scattering angles. The calculations are performed with the aid of LOWTRAN7 program. These studies are directly related to the photometer coupled to PFS (Planetary Fourier Spectrometer) planned for the Mars-96 mission.     

Measuring the matter distribution within z = 0.2 cluster lenses with XMM-Newton

We present an analysis of seven clusters observed by XMM-Newton as part of our survey of 17 most X-ray luminous clusters of galaxies at z  0.2 selected for a comprehensive and unbiased study of the mass distribution in massive clusters. Using the public software FTOOLS and XMMSAS we have set up an automated pipeline to reduce the EPIC MOS and pn spectro-imaging data, optimized for extended sources analysis. We also developped a code to perform intensive spectral and imaging analysis particularly focussing on proper background estimate and removal. XMM-Newton deep spectro-imaging of these clusters allowed us to fit a standard β-model to their gas emission profiles as well as a standard MEKAL emission model to their extracted spectra, and test their inferred characteristics against already calibrated relations.     

Ground Radiation Pattern Generated by High-Altitude Reflectors

A method is given to calculate the shape a high-altitude reflector must have to produce any intensity distribution inside the illuminated ground area. The method consists of setting up and solving a differential equation appropriate to the required ground intensity distribution. Cylindrical and spherical mirrors are discussed in detail, and mirror shapes for producing a particular type of uniform ground illumination are derived. These shapes approach paraboloids in the limit when the mirror altitude is much greater than the diameter of the illuminated area.     

Fiber-optic radar calibration

A simple fiber-optic radar calibration target is described. Its operation is based on a wideband fiber, a laser transmitter that is directly modulated by the down-converted radar signal and an optical diode receiver recovering said signal. Further up-conversion having a common local oscillator with the first mixer ensures fidelity of the calibration return. Measured useful bandwidth exceeds 200 MHz and practically any radar RF frequency can be handled when suitable mixers are employed. Amplifiers can be added to the down-converted path as desired to compensate for the fiber loss. Modulation and LO sweep provide easy ways of introducing artificial fluctuations and Doppler frequencies. Particularly pulsed radars are readily tested with the proposed scheme as no restrictions are posed by the radar's TR-switch delays.