某锅炉钢结构角钢对扣箱型结构的焊接

某锅炉钢结构项目电梯井立柱采用了角钢对扣的箱型结构,此种箱形结构截面小,焊缝布置不对称,且焊缝长度较大,坡口切割变形、焊接变形难以控制,我们通过自制工装改进制作工艺解决了此类问题,满足该项目的验收要求。     

运载火箭姿态系统自适应神经网络容错控制

针对运载火箭姿态系统跟踪问题,考虑干扰、执行器故障和模型不确定因素的影响,设计了一种基于自适应神经网络的非线性容错控制律。该控制算法结合了连续的终端滑模控制,径向基神经网络和自适应控制方法。首先,基于滑模控制理论,设计了一种快速终端滑模面,保证系统跟踪误差能够在有限时间收敛至零。然后,在终端滑模面基础上,提出了一种基于自适应径向基神经网络估计的终端滑模控制律。利用自适应参数的神经网络逼近系统参数并提高抗干扰性能,采用平滑连续控制策略消除了终端滑模中的颤动现象。通过李雅普诺夫的分析方法证明了闭环系统的收敛性和全局稳定性。采用数值仿真,验证了提出的基于自适应径向基神经网络的终端滑模控制律具有较好的跟踪性能和精度。     

在企业深化改革中开创社会化计量测试新局面

通过大量的事实，阐述了在企业不断深化改革过程中，开创社会化计量测试的基础，条件及基本做法。     

中间件技术的研究及应用

本文在分析了分布式应用系统体系结构发展变化的基础上．阐述了中间件的概念、功能和在可重用、多异构数据源应用系统的作用，对ODBC、BDE／IDAPIT、0LEDB／ADO和JDBC等分布式数据库中间件；CGI、lSAPI／NSAPI、ASP、JSP等中间件进行了分析比较，并给出了中间件技术在教务管理信息系统的应用实例。     

双拦截弹拦截单目标边界型微分对策制导律研究

针对战术弹道导弹、高超声速巡航导弹和无人飞行器等新型具有高机动性能的防空目标,为提高成功拦截的概率,采用多枚拦截弹进行拦截。应用微分对策理论,将双拦截弹拦截单目标的末段制导问题建模为“二对一追踪-逃逸”对策模型。考虑最大加速度约束,研究了两枚拦截弹的拦截空间分解和对策空间分布,并通过仿真研究了制导律性能。结果表明：采用两枚拦截弹拦截时,脱靶量对目标机动方向的转变时间具有很好的鲁棒性。     

焊接过程电信号在线监测研究现状及发展趋势

详细介绍了各种在线监测和分析方法在焊接过程电信号监测以及焊接质量评估中的应用，分析每一种在线监测方法的特点和焊接质量方面的应用现状。对各种在线监测方法在焊接质量监测中应用的发展趋势进行了分析和预测。     

Improved NSGA-II Multi-objective Genetic Algorithm Based on Hybridization-encouraged Mechanism

To improve performances of multi-objective optimization algorithms, such as convergence and diversity, a hybridization- encouraged mechanism is proposed and realized in elitist nondominated sorting genetic algorithm （NSGA-Ⅱ）. This mechanism uses the normalized distance to evaluate the difference among genes in a population. Three possible modes of crossover operators--＂Max Distance＂, ＂Min-Max Distance＂, and ＂Neighboring-Max＂--are suggested and analyzed. The mode of ＂Neighboring-Max＂, which not only takes advantage of hybridization but also improves the distribution of the population near Pareto optimal front, is chosen and used in NSGA-Ⅱ on the basis of hybridization-encouraged mechanism （short for HEM-based NSGA-Ⅱ）. To prove the HEM-based algorithm, several problems are studied by using standard NSGA-Ⅱ and the presented method. Different evaluation criteria are also used to judge these algorithms in terms of distribution of solutions, convergence, diversity, and quality of solutions. The numerical results indicate that the application of hybridization-encouraged mechanism could effectively improve the performances of genetic algorithm. Finally, as an example in engineering practices, the presented method is used to design a longitudinal flight control system, which demonstrates the obtainability of a reasonable and correct Pareto front.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

星外管路多层隔热组件热参数确定方法

提出了利用整星热平衡试验数据确定星外管路多层组件热参数的方法,解决了以往星外管路热设计在地面热试验验证不充分的难题。以某卫星星外管路为例,通过对星外管路试验状态模型的修正,确定了星外管路多层隔热组件热参数,并分析了星外管路的在轨极端温度。根据确定的星外管路多层隔热组件热参数计算出的星外管路温度,与在轨温度数据符合较好,验证了此方法的有效性。