民用飞机预研论证权威真相源构建技术

权威真相源不仅是基于模型的系统工程实施的核心要素,也是"数字工程战略"的关键环节。对权威真相源构建技术进行了研究,包括对权威真相源进行了定义和分析,设计了权威真相源的构建目标和原则,构建了权威真相源的架构和业务流程,并对构建权威真相源的支持技术进行了研究。梳理了民用飞机预研论证的业务流程、专业模型和基础模型,最后通过民用飞机预研论证验证机的案例研究,证实了权威真相源构建技术的可行性。民用飞机预研论证权威真相源能够有效提升系统工程的组织性,提升协同设计效率,同时能够提高模型和系统设计的重用性,减少系统工程实施的复杂度,缩小开发成本。     

一种复杂环境下的无线应急通信中继节点快速布点方法

无线应急通信作为综合应急保障体系的重要组成部分,在应对洪水、地震、海啸等自然灾害时有着传统网络无可比拟的便捷性和经济型.中继节点作为无线中继网络的关键环节,其选址将直接影响整个应急通信网络的性能.复杂环境无线应急通信中继节点选址依靠现场实地调查和测量,但会存在选址速度慢、中继节点冗余和通信链路质量差等问题.针对以往这些...     

A method of multi-objective reliability tolerance design for electronic circuits

Tolerance design plays an important role in reliability design for electronic circuits. The traditional method only focuses on the consistency of output response. It is not able to meet the needs of increasing development of electronic products. This paper researches the state of related fields and proposes a method of multi-objective reliability tolerance design. The characteristics of output response and operating stresses on critical components are both defined as design objectives. Critical components and their operating stresses are determined by failure mode and effect analysis (FMEA) and fault tree analysis (FTA). Sensitivity analysis is carried out to determine sensitive parameters that affect the design objectives significantly. Monte Carlo and worst-case analysis are utilized to explore the tolerance levels of sensitive parameters. Design of experiment and regression analysis are applied in this method. The optimal tolerance levels are selected in accord with a quality-cost model to improve consistency of output response and reduce failure rates of critical components synchronously. The application in light-emitting diode (LED) drivers indicates details and potential. It shows that the proposed method provides a more effective way to improve performance and reliability of electronic circuits.     

Prediction of transient responses of a folding wing during the morphing process

Accurate prediction of the structural dynamic characteristics of a folding wing during the morphing process is a prerequisite for performing transient aeroelastic analysis. In view of this fact, this paper develops a set of differential-algebraic equations that govern the time evolution of the folding wing during the morphing process by using the floating frame approach. Using the established equations of motion, the transient responses of the wing during the morphing process are computed. The developed equations can be further integrated with the CFD codes to carry out the transient aeroelastic analysis of the morphing wing.     

技术成熟度评价方法及其在交会对接任务中的应用

介绍了技术成熟度等级和评价的概念,简述了技术成熟度评价在国外航天工程中的应用情况,提出了航天工程技术成熟度评价标准,包括开展技术成熟度评价的目的、技术成熟度的详细定义及其内涵,并以技术成熟度等级五级为例,给出了具有可操作性的评价细则以及实施要点,通过交会对接任务中运载火箭评价应用实例对技术成熟度评价的应用进行了说明。     

民用飞机应急处理分析流程研究

民用飞机在飞行过程中必然会遇到一些难以预料的情况,如何使空中和地面的工作人员能快速有效地处理飞机在飞行过程中出现的突发事件,已成为世界各国航空运输业关注的重点。为了在突发事件发生后能最大限度地保障乘客和飞机的安全,介绍了空乘及地面工作人员在突发事件发生后的应急处理流程。     

Validate the IRI2007 model by the COSMIC slant TEC data during the extremely solar minimum of 2008

During 2008, the solar activity is extremely low. The satellite observations show that the ionospheric height and electron density is much lower than the predictions by the international reference ionosphere (IRI) model. In this paper, we compared the slant total electron content (TEC) observed by the COSMIC satellites during 2008 with the IRI model results. It is found that the IRI model with IRI2001 and IRI2001 Cor. topside options will always overestimate the electron density in both lower and higher altitudes. But the rest two topside options (NeQuick, and TTS) tend to overestimate the electron density in the F layer and underestimate it in the topside altitudes. The switch altitude between overestimation and underestimation and the latitude-local time distribution of the model deviation depend on the topside option. The current investigation might be useful for the model improvement as well as data assimilation work based on the IRI model and the LEO TEC data.     

基于混沌序列加权抽样和排序变换的图像置乱

为增强网络中传输的数字图像信息的安全性,对一类典型的基于混沌排序图像置乱算法——Ye算法进行了研究,给出应用间隔抽样混沌序列置乱图像可以提高混沌排序置乱算法置乱度这一性质,并依据近似熵理论给出其提升的依据.为增加图像置乱算法的密钥空间,结合Shannon加权保密思想,设计了基于加权抽样混沌序列排序图像置乱算法.结果表明,该方法密钥空间大,置乱强度高,抗重构攻击.     

高动态环境下惯组辅助GNSS接收机卫星导航信号的捕获

针对高动态环境下多普勒频移超出了接收机的搜索范围接收机无法捕获卫星导航信号这一问题,提出了利用INS辅助GNSS接收机卫星导航信号捕获的方法.该方法利用INS提供的载体位置、速度信息,并结合通过卫星星历(或历书)得到的卫星位置、速度估算载波多普勒频移,利用估算的载波多普勒频移重新设定GNSS接收机载波搜索中心频率,使G...     

六转子微型飞行器及其低雷诺数下的旋翼气动性能仿真

提出了一种新结构的六转子无人飞行器的概念,该飞行器可以在空间任意方向飞行,甚至可以在地面上滚动前进。分析了其可能的三种构型并给出了各自的运动方程,给出了三轴解耦时该飞行器的配置方式及转子空间位置。由于该飞行器具有小尺寸外形、低重量和飞行速度慢的特点,根据转子速度、弦长和飞行模态,计算得该飞行器的雷诺数变化范围为1×104到12.8×104。以选用的Eppler 387翼型作为分析对象,采用正投影混合网格方法对其在低雷诺数下的气动性能进行研究,得到了雷诺数分别为1×104,2×104,3×104和6×104下对应不同迎角的升力系数、阻力系数和升阻比,并对雷诺数为6×104下的升力系数仿真结果同试验结果进行了对比,二者具有较好的一致性。制作了六转子微型飞行器样机,实现了垂直起降及慢速前飞。