Investigations into sensing characteristics of circular thin-plate electrostatic sensors for gas path monitoring

Circular thin-plate electrostatic sensors are promising in gas path monitoring due to their advantages of non-intrusiveness and easy installation. The spatial sensitivity and filtering effect are two important performance parameters. In this paper, an analytically mathematical model of induced charge on a circular thin-plate electrode is first derived. Then the spatial sensitivity and filtering effect of the circular electrostatic sensor are investigated by numerical calculations. Finally,experimental studies are performed to testify the theoretical results. Both theoretical and experimental results demonstrate that circular thin-plate electrostatic sensors act as a low-pass filter in the spatial frequency domain, and both the spatial filtering effect and the temporal frequency response characteristics depend strongly on the spatial position and velocity of the charged particle. These conclusions can provide guidelines for the optimal design of circular thin-plate electrostatic sensors.     

Collision risk-capacity tradeoff analysis of an en-route corridor model

Flow corridors are a new class of trajectory-based airspace which derives from the next generation air transportation system concept of operations. Reducing the airspace complexity and increasing the capacity are the main purposes of the en-route corridor. This paper analyzes the collision risk-capacity tradeoff using a combined discrete–continuous simulation method. A basic two-dimensional en-route flow corridor with performance rules is designed as the operational environment. A second-order system is established by combining the point mass model and the proportional derivative controller together to simulate the self-separation operations of the aircrafts in the corridor and the operation performance parameters from the User Manual for the Base of Aircraft Data are used in this research in order to improve the reliability. Simulation results indicate that the aircrafts can self-separate from each other efficiently by adjusting their velocities,and rationally setting the values of some variables can improve the rate and stability of the corridor with low risks of loss of separation.     

航空发动机管路支撑用钢丝绳隔振器仿真研究

通过钢丝绳材料非线性研究,用弹塑性随动硬化材料模型来描述钢丝绳的本构关系。以有限元理论为基础,建立钢丝绳隔振器的有限元模型,利用有限元分析软件ANSYS进行钢丝绳隔振器的性能仿真。由仿真结果可以看出,钢丝绳隔振器具有强烈的非线性滞迟特性和刚度软化特性,同时具有大阻尼特性,并且在大变形幅值下也能保持较好的阻尼性能。通过与实验研究结果对比,验证了仿真结果的正确性,从而为钢丝绳类干摩擦阻尼隔振器有限元仿真分析奠定了良好的基础。     

在空间微重力下生长碲镉汞晶体

本文叙述了我国首次在空间微重力下进行的碲镉汞(MCT)晶体生长试验及一些观测结果。生长是从熔体进行的。在空间90min的加热时间内,将MCT多晶试样熔化,然后随炉冷却,最后在地面上再结晶。于是,生长出约3cm长的晶体,其表面光滑.结构致密,无孔洞,由1～3个大晶粒组成,其中单晶占74%。X射线能量色散分析(EDS)表明,其径向组分均匀性优于±0.02,其中约1cm长的一段晶体的径向组分均匀性优于±0.01。电学特性与地面上生长的样品基本相同。     

降低PLC系统峰均比的低复杂度改进SLM算法

针对信道慢时变特性及噪声复杂的特点,提出了适用于低压电力线通信的降低峰均比的改进算法.改进算法对原始输入序列中的部分数据进行循环移位来获得一系列不同的新数据序列;在每个新数据序列尾部插入相应的边带信息组成一个输入候选序列;对这一系列不同的输入候选序列分别实施傅里叶反变换,得到不同的输出序列;从中选择峰均比最小的用于传输,达到降低系统峰均比的目的.结果表明:改进算法能够有效地降低系统的峰均比,并且能够获得更好的误码率性能,同时具有比传统选择性映射方法更低的计算复杂度.     

基于混沌序列加权抽样和排序变换的图像置乱

为增强网络中传输的数字图像信息的安全性,对一类典型的基于混沌排序图像置乱算法——Ye算法进行了研究,给出应用间隔抽样混沌序列置乱图像可以提高混沌排序置乱算法置乱度这一性质,并依据近似熵理论给出其提升的依据.为增加图像置乱算法的密钥空间,结合Shannon加权保密思想,设计了基于加权抽样混沌序列排序图像置乱算法.结果表明,该方法密钥空间大,置乱强度高,抗重构攻击.     

单轴台的大角度姿态快速机动联合控制方法

为验证小卫星大角度姿态快速机动与高精度稳定控制能力,基于单轴气浮台硬件仿真环境,提出了一种利用推力器与飞轮组合的联合控制策略.采用相平面控制技术与有限时间控制理论设计控制器,利用推力器实现无超调的快速机动控制,利用飞轮实现有限时间内的高精度稳定控制,使单轴台在有限时间内快速高精度稳定于目标姿态.物理仿真结果表明:该方法在有限时间内完成单轴台快速稳定控制的同时,可有效避免机动过程中的超调现象,且能有效规避推力器的频繁开关与飞轮的过快饱和等问题.     

知识驱动飞机翼面结构快速设计

为提高飞机翼面结构初步设计阶段的质量和效率,对飞机翼面结构的建模过程进行研究.定义了结构布局坐标系及构件位置参数引用规则,提出了基于模板的翼面结构快速建模的方法.选择适合的参数化工具开发了知识驱动的飞机翼面结构的快速设计系统,将设计方法、规则及专家经验等知识进行封装,实现了翼面结构的自动布局并生成布置模型.在此基础上针对模型不同单元的生成逻辑,分别进行了实体模型的建立,通过用户自定义特征(UDF, User-Defined Features)技术进行几何特征体的参数化建模,在布置模型基础上自动实例化.最后通过飞机机翼翼盒结构实例验证了方法的可行性和有效性.     

钛合金的离子束改性

钛合金是航空航天工业常用的结构材料,它具有重量轻、强度高、抗腐蚀强等优良性能,但耐磨性较差.为提高其耐磨性,对TC4、TA7航材试件,采用溅射方法在其表面镀上钛膜,并用(N^＋＋N^＋₂)混合离子束进行动态反冲注入及单元素C^＋离子束注入两种方法,进行表面改性.精密摩擦、磨损试验及显微硬度测量结果,试件表面的滑动摩擦系数降低了64%~77%;磨损率减少了22%~48%;显微硬度提高0.3~1.4倍.证明离子注入有效地改善了合金表层的摩擦、磨损性能.对注入样品进行X射线光电子能谱(XPS)分析,发现注入后的钛合金表层,生成了大量的TiO₂,并析出TiN,TiC等金属化合物,这是降低摩擦系数,提高耐磨性的主要因素.添加C^＋离子注入的试件,其力学性能并无进一步改善,原因有待分析.     

X-ray induced alterations in the differentiation and mineralization potential of murine preosteoblastic cells

To evaluate the effects of ionizing radiation (IR) on murine preosteoblastic cell differentiation, we directed OCT-1 cells to the osteoblastic lineage by treatment with a combination of β-glycerophosphate (β-GP), ascorbic acid (AA), and dexamethasone (Dex). In vitro mineralization was evaluated based on histochemical staining and quantification of the hydroxyapatite content of the extracellular bone matrix. Expression of mRNA encoding Runx2, transforming growth factor β1 (TGF-β1), osteocalcin (OCN), and p21^CDKN1A was analyzed. Exposure to IR reduced the growth rate and diminished cell survival of OCT-1 cells under standard conditions. Notably, calcium content analysis revealed that deposition of mineralized matrix increased significantly under osteogenic conditions after X-ray exposure in a time-dependent manner. In this study, higher radiation doses exert significant overall effects on TGF-β1, OCN, and p21^CDKN1A gene expression, suggesting that gene expression following X-ray treatment is affected in a dose-dependent manner. Additionally, we verified that Runx2 was suppressed within 24 h after irradiation at 2 and 4 Gy. Although further studies are required to verify the molecular mechanism, our observations strongly suggest that treatment with IR markedly alters the differentiation and mineralization process of preosteoblastic cells.