基于模型降阶的随机最优输出反馈阵设计

本文研究了线性离散随机系统的模型降阶和最优输出反馈矩阵的设计问题。本文提出的设计方法不需要对原系统进行Anderson-Moore的迭代计算,直接利用求得的降阶模型解出近似的最优输出反馈阵。文中举例说明了设计方法的应用并进行了计算机仿真,仿真结果是令人满意的。     

Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.     

GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

缝隙间隙密封在阀设计中的运用

在某型飞机使用的阀中采用了缝隙间隙密封,依据计算、设计和试验阐述了泄漏量与压力、间隙尺寸、粘度及材质的关系。当间隙尺寸确定时,粘度越大,压力越小,材质越硬,则泄漏量越小,即阀在采用缝隙间隙密封时,泄漏量与工作介质的种类有关,每种工作介质粘度不同,泄漏量也不同,阀体材质越密,抗泄漏越好。因此,应尽量选择粘度系数大的介质和材质较密的材料。     

拦截高速目标的比例与反比例导引捕获区分析

针对拦截高速目标的作战特点,分析了比例导引(PN)与反比例导引(RPN)的捕获区。首先,通过分析拦截弹与目标的相对运动关系,推导得到了顺轨和逆轨的零控拦截条件,此条件由目标和拦截弹的速度前置角以及二者速度比确定;其次,以拦截弹和目标速度前置角为坐标系,推导得到了PN以及RPN捕获区以及各自导航比设置范围。PN的捕获区由逆轨零控拦截条件以及与其相切且斜率为1/(N-1)的两条直线构成,RPN的捕获区由顺轨零控拦截条件以及与其相切且斜率为1/(-N-1)的两条直线构成;然后,利用函数对称性将PN与RPN捕获区转换到同一坐标区间,得到了相同条件下RPN捕获区要大于PN捕获区的结论;最后,开展了四种情形下的仿真,验证了本文捕获区分析的合理性及有效性。     

基于北斗三号短报文的共视数据压缩传输方法

共视时间比对通过交换两地共视数据完成远距离高精度的时间比对。针对无地面通信网地区,本文提出了一种基于北斗短报文的共视数据压缩传输方法,该方法通过将共视数据进行压缩,利用北斗的短报文功能对压缩后的共视数据进行实时传输,在无地面通信网的地区进行了共视时间比对试验。试验结果表明,本文设计的共视数据压缩方法具有较好的压缩效果,可以通过北斗短报文实现无地面通信网的情况下的实时共视时间比对。     

航空发动机管路支撑用钢丝绳隔振器仿真研究

通过钢丝绳材料非线性研究,用弹塑性随动硬化材料模型来描述钢丝绳的本构关系。以有限元理论为基础,建立钢丝绳隔振器的有限元模型,利用有限元分析软件ANSYS进行钢丝绳隔振器的性能仿真。由仿真结果可以看出,钢丝绳隔振器具有强烈的非线性滞迟特性和刚度软化特性,同时具有大阻尼特性,并且在大变形幅值下也能保持较好的阻尼性能。通过与实验研究结果对比,验证了仿真结果的正确性,从而为钢丝绳类干摩擦阻尼隔振器有限元仿真分析奠定了良好的基础。     

基于分数阶理论的铁路基础设施形变监测数据分析与挖掘

北斗高精度定位系统因噪声等因素会产生一定范围内的随机误差,这导致传统模型难以直接对监测数据进行精准分析,因此提出基于分数阶理论的北斗监测数据分析方法,从数据整体趋势角度挖掘铁路基础设施形变演化规律。首先,给出分数阶分析方法的理论框架,并对基础理论进行详细介绍;其次,提出利用α稳定分布对原始数据进行概率密度拟合,实现数据的非高斯特性估计;再次,通过长程相关特性和多重分形特性挖掘隐藏在监测数据中的深层次趋势特征,从数据分数阶特性维度分析未来变化趋势;最后,所提分析方法应用于国内某重载铁路的基础设施形变监测,实验结果表明所提出的分析方法能够在噪声干扰下实现北斗监测数据的精准分析,能够对各组监测数据的演化规则和铁路基础设施形变程度进行精准判别。     

气氦制冷系统透平膨胀机的研制

文章介绍了载人航天空间环境模拟器气氦制冷系统中氦气透平膨胀机的设计、制造、调试等过程,并说明了它具备的特点。     

位移序列多进制扩频通信方式

提出用 m序列的位移序列做扩频序列的多进制扩频通信方式 ,并给出了它的系统模型 ,分析了它的通信性能。理论分析证明 ,用 m序列的位移序列构成的多进制扩频通信方式具有很高的通信有效性和通信可靠性