声波激振的微观机理探讨

在对物质粒子运动和能量传递以及微观粒子运动和能量变化两个层面进行辨证分析和逻辑推理的基础上,结合航空发动机流道内的实际情况,对声波激振的微观机理作了整体描述.得出了若干初步的定性结论.文中分析研究有助于建立物体振动微观粒子运动分析计算的数理模型,推论方法和结论,还有待进一步深入研究确证.     

The Magnetic Electron Ion Spectrometer (MagEIS) Instruments Aboard the Radiation Belt Storm Probes (RBSP) Spacecraft

This paper describes the Magnetic Electron Ion Spectrometer (MagEIS) instruments aboard the RBSP spacecraft from an instrumentation and engineering point of view. There are four magnetic spectrometers aboard each of the two spacecraft, one low-energy unit (20–240 keV), two medium-energy units (80–1200 keV), and a high-energy unit (800–4800 keV). The high unit also contains a proton telescope (55 keV–20 MeV). The magnetic spectrometers focus electrons within a selected energy pass band upon a focal plane of several silicon detectors where pulse-height analysis is used to determine if the energy of the incident electron is appropriate for the electron momentum selected by the magnet. Thus each event is a two-parameter analysis, an approach leading to a greatly reduced background. The physics of these instruments are described in detail followed by the engineering implementation. The data outputs are described, and examples of the calibration results and early flight data presented.     

高超声速飞行器二元进气道试验和计算

设计了一种吸气式面对称高超声速飞行器,针对进气道性能,分别在两座风洞开展通流试验研究。针对第1次风洞试验大攻角状态(α=8°)测量值偏离线性的问题,辅助采用数值模拟手段分析原因,并对试验方案进行改进设计,解决了首次试验出现的问题。结果显示,在典型状态(Ma=5~6)下,进气道起动正常,性能良好,具有一定的抗侧滑能力;随来流马赫数增加,进气道流量系数增大,总压恢复系数减小,计算结果和试验结果一致;试验结果和数值计算的差异主要表现为基本测压方案α>4°后,流量系数和总压恢复系数出现严重的非线性。数值模拟结果表明,主要原因为模型支撑方式及测压方式所引起的偏差,通过改进试验方案,解决了大攻角状态下测量值偏离正常趋势的问题。     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

Robust speed sensorless induction motor drive

A speed sensorless induction motor (IM) drive with robust control characteristics is introduced. First, a speed observation system, which is insensitive to the variations of motor parameters, is derived based on the concept of sliding mode. Next, an integral-proportional (IP) speed controller using the estimated speed signal is designed to stabilize the speed loop. Then, to preserve the robust control performance under parameter variations and external load disturbance, an adaptive uncertainty observer with feedforward control is proposed. The adaptive uncertainty observer is implemented to estimate the lump of uncertainty of the controlled plant. To increase the accuracy of the estimated values, the speed observation system is implemented using a digital signal processor (DSP) with a high sampling rate     

交会对接载人飞船返回舱结构优化设计

为减轻飞船返回舱结构重量、使结构形式更为合理,对返回舱主要部件进行了结构优化设计。在不降低结构可靠性、满足与其他设备接口匹配性等4项优化原则的基础上,合理选取优化对象,确定了优化目的和约束条件,并以前端框、滚动发动机舱和贮箱隔舱3个主要部件为例分别进行阐述。通过优化设计,3个主要部件的结构重量减轻了0.25～10kg,...     

电磁式舵机的驱动设计试验与仿真

针对一种电磁式舵机,基于虚拟仪器技术设计了相应的测试系统,对舵机的动态性能进行了测试分析。考虑到铁磁阻的非线性和漏磁通的分散性,本文采用磁路微分法建立了舵机电磁铁的数学模型,对其动态特性进行仿真分析。结果表明:舵机的性能满足系统设计要求。试验结果与仿真结果基本一致,仿真计算可以用于舵机性能的优化与分析。     

一种语音信号欠定盲分离的新方法

文章提出了一种语音信号欠定盲分离的新方法,引入了一种伪提取矢量的概念,并通过在信号采样点处选取对应的伪提取矢量,以恢复取值占优的源信号采样点的值,来实现欠定盲源分离。通过将该方法与传统的基于线性规划的欠定盲源分离方法分别仿真表明:文章所提出方法由于在信号的各采样点处无需优化,因此大大提高了信号分离的速度,语音信号的分离速度比基于线性规划的方法快数倍。     

基于不同数控系统的固定轴加工手动编程方法

根据多年的数控加工编程经验,给出了多轴加工中常用的固定轴加工方法的重要性和广阔的应用前景,并对固定轴加工进行了准确定义,阐述了固定轴加工的原理,结合实例介绍了三种常用数控系统中涉及的固定轴加工高级编程指令的编程方法。     

提高长线传输数字波形质量的技术措施

从两方面论述数字编码波形在长线上传输的影响因素及其改善措施。通过分析并经实验表明，长线的分布电容影响通常居诸因素之首位。改进长线驱动电路，在一定程度上，可改善其传输波形之质量。另外，可利用长线传输波形的同时，还传输供总线接口电路需要的电源能量，满足总线浮空隔离的要求，有效地抑制了共模干扰。此项技术适用于远距多路串行总线的数据采集系统。