超宽带变频系统中的本振产生技术研究

本振源是超宽带变频系统中的核心部件，本文以超宽带上变频系统为例，介绍变频系统中本振信号的产生技术。本文所设计的超宽带变频系统，经过三次上变频，可将(0.8~2.8)GHz 的低频信号变换至（0.5~40）GHz。变频过程中需要一系列点频本振和一组宽带本振，基于PLL+DFS 的方法产生点频本振，基于DDS+DFS 的方式产生宽带本振。     

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

Orbit determination and prediction of GEO satellite of BeiDou during repositioning maneuver

In order to establish a continuous GEO satellite orbit during repositioning maneuvers, a suitable maneuver force model has been established associated with an optimal orbit determination method and strategy. A continuous increasing acceleration is established by constructing a constant force that is equivalent to the pulse force, with the mass of the satellite decreasing throughout maneuver. This acceleration can be added to other accelerations, such as solar radiation, to obtain the continuous acceleration of the satellite. The orbit determination method and strategy are illuminated, with subsequent assessment of the orbit being determined and predicted accordingly. The orbit of the GEO satellite during repositioning maneuver can be determined and predicted by using C-Band pseudo-range observations of the BeiDou GEO satellite with COSPAR ID 2010-001A in 2011 and 2012. The results indicate that observations before maneuver do affect orbit determination and prediction, and should therefore be selected appropriately. A more precise orbit and prediction can be obtained compared to common short arc methods when observations starting 1 day prior the maneuver and 2 h after the maneuver are adopted in POD (Precise Orbit Determination). The achieved URE (User Range Error) under non-consideration of satellite clock errors is better than 2 m within the first 2 h after maneuver, and less than 3 m for further 2 h of orbit prediction.     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

基于开路电压法的电池荷电状态估计误差校正

本文提出分别研究电池开路电压在充电结束后停置过程和放电结束后停置过程的不同变化规律,并考虑了不同停置时间在两个过程中的作用和影响,从而达到提高开路电压法估算荷电状态精度的效果。实验验证表明,此方法的精度比传统开路电压法更加准确。     

固体火箭发动机专用ICT机械扫描系统

以成熟的组合精密镗床为本体, 研制了固体发动机专用ＩＣＴ机械扫描系统。采用４５０ ｋＶ Ｘ射线源, 设计了准直器系统、探测器系统、机械扫描系统（传动控制系统、夹具及同步台）, 实测证明扫描系统符合精度要求     

含能材料低温松驰WLF方程的两种求值法

通过玻璃化转变温度和表同活化能以及由ＶＦＴ方程导得ＷＬＦ方程粘弹系数的两种新方法,用该方法分别计算１０个体系的粘弹系数,结果表明,用ＤＳＣ技术可以获得ＷＬＦ方程,３种计算方法获得的粘弹系数符合较好。