螺旋桨目标的雷达回波信号相位解缠技术

建立了螺旋桨的雷达回波信号模型。对模型回波信号的相位混叠效应进行了理论分析,讨论了回波相位混叠效应出现的原因,通过模型改进获得了螺旋桨的雷达回波相位的理论表达式。提出插值与可调门限相结合的算法和自适应数值积分算法两种相位解缠方法,分别用于桨叶数为偶数和奇数时的相位解缠。仿真结果表明:两种算法有较高的精度。     

射频阵列仿真系统的目标位置精度分析

射频阵列仿真系统是一种比较理想的导弹武器系统抗干扰试验环境,目标位置精度是射频阵列仿真系统的关键指标。阐述了影响目标位置精度的主要原因,并结合测量数据对其进行分析,为工程应用提供了参考。     

利用流线法决定绕扁长椭球流动分离的位置

本文按照流线法把所测量的扁长椭球的压力分布用于决定涡层型三维流动分离,按边界层边缘处流线会聚的位置近似地决定分离线的位置。作为算例,计算了扁长椭球体在α=30°状态下的绕流,并在水洞中作了流场显示,数值结果和实验结果的对比表明,二者十分一致。分析表明,涡层型分离不仅与壁面极限流线的收敛有关,而且还与边界层边缘处流线会聚有关,前者的出现并不是引起涡层型流动分离的充要条件。     

Radio fine structures in dm–cm wavelength range associated with magnetic reconnection processes

Radio bursts with fine structures in decimetric–centimetric wave range are generally believed to manifest the primary energy release process during flare/CME events. By spectropolarimeters in 1–2 GHz, 2.6–3.8 GHz, and 5.2–7.6 GHz at NAOC/Huairou with very high temporal (1.25–8 ms) and spectral (4–20 MHz) resolutions, the zebra patterns, spikes, and new types of radio fine structures with mixed frequency drift features are observed during several significant flare/CME events. In this paper we will discuss the occurrence of radio fine structures during the impulsive phase of flares and/or CME initiations, which may be connected to the magnetic reconnection processes.     

安全阀性能检测系统的测量不确定度

分析了安全阀性能检测系统中的主要误差因素，对安全阀动作性能和排量系数的测量不确定度进行了初步计算。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

运载火箭姿态系统自适应神经网络容错控制

针对运载火箭姿态系统跟踪问题,考虑干扰、执行器故障和模型不确定因素的影响,设计了一种基于自适应神经网络的非线性容错控制律。该控制算法结合了连续的终端滑模控制,径向基神经网络和自适应控制方法。首先,基于滑模控制理论,设计了一种快速终端滑模面,保证系统跟踪误差能够在有限时间收敛至零。然后,在终端滑模面基础上,提出了一种基于自适应径向基神经网络估计的终端滑模控制律。利用自适应参数的神经网络逼近系统参数并提高抗干扰性能,采用平滑连续控制策略消除了终端滑模中的颤动现象。通过李雅普诺夫的分析方法证明了闭环系统的收敛性和全局稳定性。采用数值仿真,验证了提出的基于自适应径向基神经网络的终端滑模控制律具有较好的跟踪性能和精度。     

线性尺寸未注公差标准演变及应用

从实际应用的角度出发，阐述了线性尺寸未注公差各标准的演变和主要特点，并提出了在机械加工应用中具有简明、省时、质优等特点。     

基于DS18B20的数字温度测量仪

介绍了DS18B20-线式数字温度传感器的功能特性和结构特点，分析了其工作时序，结合AT89S51给出了数字式温度测量装置的系统结构、硬件接口电路和软件设计方法。     

宽角扫描圆极化相控阵天线轴比的优化设计

文章推导了椭圆极化的分解表示方式，从理论上给出了优化天线轴比的方法。给出了几个实际天线的测试结果比较，验证了该方法的可行性。