Optical Calibration of Geostationary Satellite Tracking Systems

A precise calibration method for range and angle observation has been developed for eliminating the systematic error of tracking systems, thus improving the accuracy of orbit determination for geostationary satellites. The principle of calibration is based on an orbit determination employing a point of optical angle observation in addition to radio tracking observation, in which we estimate observation bias parameters simultaneously with orbital elements, including the effects of geodetic mismodelings. As shown by an actual calibration experiment in our ground station, orbit determinations is sufficiently accurate that the error of predicting satellite range falls within a few meters at four days after the day of orbit determination.     

Ground probing radar system

Two types of battery-powered, compact, ground probing radar (GPR) systems have been developed. The systems have CRT displays mounted on antenna units and are used to locate such underground objects as gas pipes, water pipes, and transmission cables. The performance of the systems and results of field tests are reported. The GPR detected 59 of 64 underground gas pipes; a 200-mm-diameter pipe is clearly detected at a depth of 2.3 m     

A challenge to the highest balloon altitude

Development of a balloon to fly at higher altitudes is one of the most attractive challenges for scientific balloon technologies. After reaching the highest balloon altitude of 53.0 km using the 3.4 μm film in 2002, a thinner balloon film with a thickness of 2.8 μm was developed. A 5000 m³ balloon made with this film was launched successfully in 2004. However, three 60,000 m³ balloons with the same film launched in 2005, 2006, and 2007, failed during ascent. The mechanical properties of the 2.8 μm film were investigated intensively to look for degradation of the ultimate strength and its elongation as compared to the other thicker balloon films. The requirement of the balloon film was also studied using an empirical and a physical model assuming an axis-symmetrical balloon shape and the static pressure. It was found that the film was strong enough. A stress due to the dynamic pressure by the wind shear is considered as the possible reason for the unsuccessful flights. A 80,000 m³ balloon with cap films covering 9 m from the balloon top will be launch in 2011 to test the appropriateness of this reinforcement.     

Telescience testbed for biomedical experiments in space morphological and physiological experiments of rat musculoskeletal system.

As the second telescience testbed experiment we were examined sophisticated processes of biomedical experiment, such as an implantation of a transmitter into the hamster's abdominal cavity, non-stressful blood sampling, large amount of blood collection, muscle extirpation and biopsy from the hamsters on February 6-8, 1990. To make clear the differences between successful results obtained by an experienced hand and by a non-experienced one, three operators were selected for three successive experimental days; an engineer who had never experienced any biological experiment, a non-biology student, who experienced on biological experiments, and a veterinary surgeon. Surgical procedures need much experiences on maneuvering and understanding of theory to shorten the elapse time. Especially for a non-experienced hand, graphic instructions were much helpful to understand and to maneuver the procedures. Continuous recordings of ECG from a operator and PIs were of an advantage to grasp an extent of the mental strain, which was compared with their reports requested after end of each experimental day. The mental strain was not related to degrees of scientific achievement, but showed faithfully difficulty of each experimental procedure. Training effects on PIs in successive experimental days were found in their instructions for the operator to let understand the procedures.     

High gain airborne antenna for satellite communications

The performance of an airborne phased-array antenna, which was developed and evaluated onboard a commercial aircraft using the Engineering Test Satellite V (ETS-V), is reported. The system requirements and the antenna configuration that satisfies them are described. The radiation pattern, gain and axial ratio, noise temperature and ratio of gain to noise temperature, and environmental characteristics are presented. The results obtained by the flight experiments demonstrate that the performance of the antenna is the same as that on the ground, so that the antenna is suitable for installation in an aircraft for satellite communications     

Study on variable-shape supersonic inlets and missiles with MRD device

This paper proposes a new aerodynamic device, which was designated multi-row-disk (MRD). This device has a cone and stabilizer disks being arranged in the axial direction. This device can arbitrarily change its aerodynamic characteristics by translating stabilizer disks. In the first part of this paper, the effect of several nose shape configurations including the MRD device on the aerodynamic characteristics is reported. By increasing the number of stabilizer disks, zero-lift drag and induced drag can be reduced. It was also found that putting cavities on the conical surface is effective for improving longitudinal static stability. In the second part, the effect of cavity flow instability on pressure and strain oscillation is reported. We drew the design criterion that the configuration of stabilizer disks should be determined not to couple the 1st mode with pressure oscillation frequency, which can be predicted with Rossiter's formula.     

Executive function on the 16-day of bed rest in young healthy men

Microgravity due to prolonged bed rest may cause changes in cerebral circulation, which is related to brain function. We evaluate the effect of simulated microgravity due to a 6° head-down tilt bed rest experiment on executive function among 12 healthy young men. Four kinds of psychoneurological tests—the table tapping test, the trail making test, the pointing test and losing at rock–paper–scissors—were performed on the baseline and on day 16 of the experiment. There was no significant difference in the results between the baseline and day 16 on all tests, which indicated that executive function was not impaired by the 16-day 6° head-down tilting bed rest. However, we cannot conclude that microgravity did not affect executive function because of the possible contribution of the following factors: (1) the timing of tests, (2) the learning effect, or (3) changes in psychophysiology that were too small to affect higher brain function.     

Electron temperature anisotropy effects on tearing mode in ion-scale current sheets

Recent two-dimensional (2-D) particle-in-cell (PIC) simulations have shown that there is a critical thickness of a current sheet, above which no significant saturation amplitude of the 2-D tearing (TI) mode can be expected. Here, we have introduced the initial electron temperature anisotropy (α_e0 = T_e⊥/T_e|| > 1), which is known to raise significantly the linear growth rates, and inspected if α_e0 > 1 can change the saturation level of the TI in a super-critical current sheet. Varying α_e0 and D (D: the current sheet half-thickness) systematically, we have found that while α_e0 boosts up the linear growth rate in both sub- and super-critical current sheets, macroscopic effects are obtained only in sub-critical current sheets, that is, energy transfer from the fastest growing short wavelength modes to longer wavelength modes are available only in the sub-critical regime. Since the critical thickness is a fraction of the ion inertial length, the tearing mode assisted by the electron temperature anisotropy alone, despite its significant boost in the linear growth rate, cannot be the agent for reconnection triggering in a current sheet of ion-scale thickness.     

The Japanese lunar mission SELENE: Science goals and present status

The Japanese lunar mission SELENE (SELenological and ENgineering Explorer) has been in development to target launch scheduled 2007 summer by H-IIA rocket. The SELENE is starting final integration test after SAR (System Acceptance Review), SRR (System Reliability Review) and instrument environment test. The SELENE is a remote-sensing mission orbiting 100 km altitude of the Moon for nominal one year and extended some months to collect the data for studying the origin and evolution of the Moon. Fourteen instruments and experiment systems are preparing for studies of the Moon, in the Moon, and from the Moon; global element and mineral compositions, topological structure, gravity field of whole moon, and electromagnetic and particle environment of the Moon. The new data center SOAC (SELENE Operation and data Analysis Center) are completed to construct in JAXA Sagamihara campus, and end-to-end test will be carried out between SOAC and data downlink stations.