Vertical motions in Thailand after the 2004 Sumatra–Andaman Earthquake from GPS observations and its geophysical modelling

Following previous findings from ongoing GPS research in Thailand since 2004 we continue to exploit the GPS technique to monitor and model land motions induced by the Sumatra–Andaman Earthquake. Our latest results show that up to the end of 2010, Thailand has been co-seismically displaced and is subsequently undergoing a post-seismic horizontal deformation with total displacements (co-seismic plus post-seismic) ranging from 10.5 to 74.7 cm. We observed the largest horizontal displacements in the southern part of Thailand and moderate and small displacements in the central and northern parts. In addition to horizontal displacements throughout Thailand, continuous GPS measurements show that large parts of Thailand are subsiding at rates up to 1 cm/yr. It is the first time that such vertical post-seismic deformations at large distances (650–1500 km away from the Earthquake’s epicentre) have been recorded. We have investigated the physical processes leading to the observed subsidence. While after-slip on the subduction interface induces negligible or even slightly positive vertical motions, relaxation in the asthenosphere is associated with a sizable subsidence. Predictions from a 3D finite element model feature an asthenosphere with an effective viscosity of the order of 3 * 10¹⁸ Pas, fit the horizontal post-seismic data and the observed subsidence well. This model is then used to predict the subsidence over the whole seismic cycle. The subsidence should go on with a diminishing rate through the next two decades and its final magnitude should not exceed 10 cm in the Bangkok area.     

Wide field cameras for SAX

SAX is an Italian X-ray satellite with a Dutch contribution that will be placed in orbit in 1994. The prime scientific object of SAX is to cover an energy bandwidth that ranges from 0.1 keV up to 200 keV. Among other instruments, SAX will consist of two X-ray Wide Field Cameras built by the Space Research Organisation Netherlands at Utrecht. The WFCs are based on the coded mask principle, the reconstruction of the image takes place on ground. The field of view is 20 degrees square full width at half maximum (FWHM), the angular resolution 5 arcminutes (FWHM) and the energy band ranges from 1.8 to 30 keV with a resolution of 18% at 6 keV. The sensitive area is 200 cm² at 6 keV. The mask pattern is based on a pseudo random array with 255 × 257 elements of 1 mm², 50% of which are transparent.     

Microbial fuel cells applied to the metabolically based detection of extraterrestrial life

Since the 1970s, when the Viking spacecrafts carried out experiments to detect microbial metabolism on the surface of Mars, the search for nonspecific methods to detect life in situ has been one of the goals of astrobiology. It is usually required that a methodology detect life independently from its composition or form and that the chosen biological signature point to a feature common to all living systems, such as the presence of metabolism. In this paper, we evaluate the use of microbial fuel cells (MFCs) for the detection of microbial life in situ. MFCs are electrochemical devices originally developed as power electrical sources and can be described as fuel cells in which the anode is submerged in a medium that contains microorganisms. These microorganisms, as part of their metabolic process, oxidize organic material, releasing electrons that contribute to the electric current, which is therefore proportional to metabolic and other redox processes. We show that power and current density values measured in MFCs that use microorganism cultures or soil samples in the anode are much larger than those obtained with a medium free of microorganisms or sterilized soil samples, respectively. In particular, we found that this is true for extremophiles, which have been proposed as potential inhabitants of extraterrestrial environments. Therefore, our results show that MFCs have the potential to be used for in situ detection of microbial life.     

He-like Ar xvii triplet observed by RESIK

We present the observations of He-like Ar triplet lines obtained by RESIK spectrometer aboard CORONAS-F. Interpretation of intensity ratios between triplet lines of lower Z elements is known to provide useful diagnostics of plasma conditions within the emitting source. Here, we investigate whether triplet line ratios are useful for interpretation of higher Z element spectra. A high sensitivity, low background and precise absolute calibration of RESIK allow to consider in addition also the continuum contribution. This provides a way to determine the Ar absolute abundance from the observed triplet component ratios. The method is presented and the results are shown for two selected flares. Derived values of Ar absolute abundance for these flares are found to be similar: 2.6 × 10⁻⁶ and 2.9 × 10⁻⁶. They fall in the range between presently accepted Ar photospheric and coronal abundances.     

Spectroscopic analysis of the solar flare event on 2002 August 3 with the use of RHESSI and RESIK data

We use simultaneous observations from RESIK and RHESSI instruments to compare plasma properties of a major solar flare in its rise and gradual phase. This event occurred on 2002 August 3 (peak time at 19:06 UT). The flare had a very good coverage with RESIK data and well-resolved soft and hard X-ray sources were seen in RHESSI images. Spectra of X-ray radiation from RHESSI images are studied and compared with RESIK measurements in different flare phases. Result shows large differences in flare morphology and spectra between flare rise and gradual phase.     

Temperature comparison between CHAMP radio occultation and TIMED/SABER measurements in the lower stratosphere

Global Positioning System (GPS) receiver on the CHAllenging Mini-satellite Payload (CHAMP) and the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument, one of four on board the TIMED satellite, provide middle atmosphere temperature profiles by Radio Occultation (RO) and limb viewing infrared emission measurements, respectively. These temperature profiles retrieved by two different techniques in the stratosphere are compared with each other using more than 1300 correlative profiles in March, September and December 2005. The over-all mean differences averaged over 15 and 35 km are approximately −2 K and standard deviation is less than 3 K. Below 20 km of altitude, relatively small mean temperature differences ∼1 K are observed in wide latitudinal range except for June (during the SABER nighttime observation). In the middle to low latitudes, between 30°S and 30°N, the temperature difference increases with height from ∼0–1 K at 15 km, to ∼−4 K at 35 km of altitude. Large temperature differences about −4 to −6 K are observed between 60°S and 30°N and 31–35 km of altitude for all months and between 0° and 30°N below 16 km during June (nighttime).     

Regolith X-Ray Imaging Spectrometer (REXIS) Aboard the OSIRIS-REx Asteroid Sample Return Mission

The Regolith X-ray Imaging Spectrometer (REXIS) is the student collaboration experiment proposed and built by an MIT-Harvard team, launched aboard NASA’s OSIRIS-REx asteroid sample return mission. REXIS complements the scientific investigations of other OSIRIS-REx instruments by determining the relative abundances of key elements present on the asteroid’s surface by measuring the X-ray fluorescence spectrum (stimulated by the natural solar X-ray flux) over the range of energies 0.5 to 7 keV. REXIS consists of two components: a main imaging spectrometer with a coded aperture mask and a separate solar X-ray monitor to account for the Sun’s variability. In addition to element abundance ratios (relative to Si) pinpointing the asteroid’s most likely meteorite association, REXIS also maps elemental abundance variability across the asteroid’s surface using the asteroid’s rotation as well as the spacecraft’s orbital motion. Image reconstruction at the highest resolution is facilitated by the coded aperture mask. Through this operation, REXIS will be the first application of X-ray coded aperture imaging to planetary surface mapping, making this student-built instrument a pathfinder toward future planetary exploration. To date, 60 students at the undergraduate and graduate levels have been involved with the REXIS project, with the hands-on experience translating to a dozen Master’s and Ph.D. theses and other student publications.