临界雷诺数区准椭圆形覆冰导线风压特性研究

采用刚性模型进行测压试验,得到了不同雷诺数下准椭圆形覆冰导线的风压分布规律,通过对比平均风荷载、脉动风荷载及风荷载谱等参数,分析了雷诺数对风荷载以及横风向驰振稳定性的影响。当雷诺数达到临界区,与亚临界区的对应值相比,平均阻力系数下降、平均升力系数随风向角变化幅度大且在某些对称工况产生横风向平均升力系数;平均风压系数分布对风向角等参数更为敏感。旋涡脱落由亚临界区的规则脱落变为不规则脱落,周向风压相关性减弱,特征频率消失。临界区内平均升力系数急剧的下降段使得结构更易发生横风向驰振。     

NF-6风洞马赫数控制系统研制

NF-6风洞是我国唯一一座增压连续式跨声速翼型风洞,为了提高实验雷诺数,在设计上还具有喷氮降温的功能。笔者介绍了NF-6风洞马赫数控制系统的组成、特点及运行方式,对转速控制子系统、压缩机静叶角控制子系统、二喉道栅指控制子系统等进行了较为详细的介绍。     

面向空间电推力器的氙气供给系统发展综述及展望

在阐述氙气供给系统组成与分类基础上,将传统氙气供给系统和先进氙气供给系统按照机械减压型、开关控制型和比例控制型三种类型进行梳理,提炼了氙气供给系统中涉及到的关键技术,如建模与仿真技术、流体控制部件技术及系统集成技术,并对其研究现状进行了概述。对氙气供给系统的发展现状和发展趋势进行了总结,重点对国内外氙气供给技术的差距进行分析,给出了我国电推进氙气供给系统的发展建议。首次全面、系统地对面向空间电推力器的氙气供给系统进行综述、总结和展望,对于氙气供给技术的研究具有重要的参考价值。     

The determination for ideal release point of test masses in drag-free satellites for the detection of gravitational waves

Gravitational waves are ripples in space–time predicted by Albert Einstein's general relativity and provide a new way to understand the universe. Space-borne detectors of gravitational waves, extending to very large scales, can effectively detect the middle and low-frequency gravitational wave source with the frequency band of 0.1 mHz–1 Hz. The test masses are used to make an inertial reference point in the detection of gravitational waves. Currently, there are few studies concerning the ideal release position for the test masses in the detection of gravitational waves. In this study, we give a general solution for test mass release points to minimize the relative motion between the test mass and the satellite mass center. Moreover, we discuss the situation when the release point equation is not satisfied, and the ideal release point of the along-track. Finally, we report on simulations that verify the accuracy of the theoretical derivation.     

原子层沉积纳米钝化层薄膜厚度测量技术研究

原子层沉积无机纳米薄膜技术广泛应用于军民领域。本文通过在原子层沉积系统加装原位石英晶体微天平测量系统，通过原位石英晶体微天平研究原子层沉积无机薄膜生长过程并进行薄膜厚度的在线测量。通过研究原子层沉积反应条件，实现原子层沉积无机薄膜厚度的石英晶体微天平在线测量结果替代薄膜厚度线下光学测量结果，解决各类复杂腔体内壁原子层沉积薄膜厚度无法精确测量的问题。     

Analysis of the dynamic performance of an electro-hydrostatic actuator and improvement methods

As a kind of actuation mechanism for power-by-wire (PBW) actuation systems of more/all electrical aircraft, an electro-hydrostatic actuator (EHA) is a highly integrated local hydraulic actuation system. It is a volume control system consisting of a motor, a pump, an actuator, etc., which has features of high efficiency and reliability. However, the poor dynamic characteristic is one of the main factors restricting its wide application in aircraft. In this paper, the reason for the poor dynamic characteristic of an EHA is revealed from the perspectives of the natural frequency characteristic and the power requirement, respectively. In other words, the insufficiency of the motor output power at a high frequency is the main factor causing the poor dynamic characteristic of the system, and methods which include increasing the maximum output torque of the motor, reducing the rotational inertia of the motor-pump group, and adopting a double-motor-pump group configuration are proposed in this paper, by which the dynamic characteristic of the system can be improved. The feasibility of those methods are verified by simulations. Finally, the dynamic characteristic is tested on an EHA prototype, and results show that saturation of the output torque of the motor is the main factor restricting the dynamic characteristic of the EHA system.     

Active Current Sharing of LCLC Resonant Converter with Switch‑Controlled‑Capacitor Technology

In this paper,an interleaved LCLC converter with enhancement-mode(E-mode)GaN devices is introduced to achieve the accurate current sharing performance for data center applications. Any tolerance in the resonant tank elements can lead to large load imbalance between any two different phases. Due to the steep gain curves of LCLC converters,conventional current sharing methods are not effective. In the proposed converter,the impedances of the resonant networks are matched by switching a capacitor,i.e.,switch controlled capacitor(SCC),in series with the resonant capacitor in one or some of the phases,which results in accurate load current sharing among the phases with an accuracy around 0.025%. The load share of a phase is sensed through the resonant current on it,and the control logic applied to such current sharing can be achieved. By this method,accurate current sharing is achieved for a wide input voltage range required for the hold-up time in data center applications. Interleaving is applied in the proposed multiphase LCLC converter,resulting in low current stress on the output capacitor and allowing ceramic capacitor implementation. Moreover,phase shedding accomplishes high light load efficiency. The performance of the proposed interleaved LCLC converter is verified by a two-phase 1 k W prototype with an input voltage ranging from 250 V to 400 V and a fixed 12 V output voltage.     

一种基于修正Hough变换的航迹起始算法

为了在重杂波区内检测出运动的目标,提出了一种修正的Hough变换算法用于初始航迹的建立。与传统的算法相比,修正算法充分利用目标的运动学信息,选取了更为合适的变换参量,仅利用较少拍数的量测就可以完成起始,能够在检测概率较高的环境下具有良好的起始性能。计算机仿真结果表明,算法能够克服传统算法的多拍扫描,大大缩短实际的计算量和起始时间,实现对航迹起始的在线改进。     

在校大学生就业压力源及其影响

就业压力已成为大学生的主要思想压力,这一现象已引起社会的广泛关注。目前大学生的就业压力源研究仅限于区分就业压力源维度,并没有对各维度进行细分,也未研究各就业压力源对在校大学生心态和行为的不同影响。从这两个方面入手,将就业压力源细分为6大维度、20项指标,并根据其影响将其分为＂良性压力源＂和＂劣性压力源＂。这对社会、学校、家庭和大学生自身的就业指导和思想教育与管理有着重要意义。     

发动机进气道短舱前缘结冰三维模拟研究

为计算发动机进气道短舱前缘的结冰冰形,在Messinger结冰热力学模型的基础上发展了一套纯三维的表面溢流水流动结冰模型。考虑空气摩擦力为表面溢流水流动的主要驱动力,用空气对进气道表面的剪切力来确定溢流水的流动方向及流量分配。为求解溢流水结冰模型,发展了一套重复查找表面控制体状态的方法,能够快速完成整个三维表面的计算。用该方法对某三维发动机进气道进行计算,得到了三维结冰冰形,并将计算结果与FENSAP-ICE计算结果进行了对比,结果显示两者的冰形轮廓基本一致,仅在冰角处存在差异,表明本文三维发动机结冰计算模型与计算方法是有效的,其计算精度与FENSAP-ICE结果相当。