基于光纤耦合金刚石NV色心系综磁强计的电路诊断方法

为考查应用新型磁强计——金刚石氮空穴(nitrogen-vacancy,NV)色心系综磁强计进行电路诊断的可行性和可靠性,从金刚石NV色心系综磁强计的基本原理出发,搭建了一套光纤耦合金刚石NV色心系综磁强计测试实验系统,将探头紧贴于电路导线外壳,通过测量磁强计处磁场信号的变化实现对电路的诊断.实验结果表明,金刚石NV色...     

SiC/CVD SiC复合涂层的抗氧化及抗热震性能研究

为了提高C/SiC复合材料耐高温性能,采用泥浆浸渍裂解与真空化学气相沉积(CVD)在材料表面制备了SiC/CVD SiC复合涂层,通过XRD、SEM分析了涂层组成与结构;研究了复合涂层的高温抗氧化(700～1 500℃)和抗热震性能。结果表明,泥浆浸渍法制备的SiC涂层具有一定的封孔效果,可使材料开孔率下降,但高温抗氧化效果并不佳,1 200℃氧化10 min后材料弯曲强度保留率下降明显仅有86%。CVD SiC涂层结构致密,与SiC封孔涂层结合较好,在700～1 500℃具有较好的抗氧化效果,随着氧化温度的升高,氧化后涂层完好,表面O元素逐渐增加,材料失重率缓慢增加但不大于0.5%,且材料性能并未下降。涂层材料在1 200℃-10 min短时热震5次后材料弯曲强度保留率仍有95%以上,且未出现开裂、剥落等热震损伤。在1 200℃-30 min长时热震10次后,涂层材料基本被完全氧化,材料失去保护作用,弯曲强度下降至90%左右。     

Numerical Analysis of Dry Friction-Induced Vibration of Moving Slider-Elastic Annular Beam System

A disc-pad friction system is modelled as that two moving pads act symmetrically on an annular beam with flexible boundary condition.Simulation procedure is proposed to deal with the moving interactions and calculation is carried out by using the finite difference method,which shows that only the first-order mode vibration of the beam can be induced.Then the partial differential equation of motion of the disk is reduced to a first-order mode vibration system with time-varying stiffness.As the disk speed is decreased below the critical speeds,the relative equilibrium of the pad on the disk loses its stability and stick-slip type limit cycle vibrations are resulted in all directions′movements.Acceleration of the disk motion on the frictional instability is also investigated.The period of stick-slip vibration with large amplitude will be shortened with higher moving deceleration.     

Backstepping sliding-mode control of stratospheric airships using disturbance-observer

In the presence of unknown disturbances and model parameter uncertainties, this paper develop a nonlinear backstepping sliding-mode controller (BSMC) for trajectory tracking control of a stratospheric airship using a disturbance-observer (DO). Compared with the conventional sliding mode surface (SMS) constructed by a linear combination of the errors, the new SMS manifold is selected as the last back-step error to improve independence of the adjustment of the controller gains. Furthermore, a nonlinear disturbance-observer is designed to process unknown disturbance inputs and improve the BSMC performances. The closed-loop system of trajectory tracking control plant is proved to be globally asymptotically stable by using Lyapunov theory. By comparing with traditional backstepping control and SMC design, the results obtained demonstrate the capacity of the airship to execute a realistic trajectory tracking mission, even in the presence of unknown disturbances, and aerodynamic coefficient uncertainties.     

企业知识生态系统内生与外生协同机制研究

通过对企业知识生态系统协同机制的研究,设计知识生态系统内生和外生协同机制.内生协同机制包括企业知识生态系统战略协同机制、内部环境协同机制、领导协同机制、知识主体协同机制、激励协同机制的设计.外生协同机制包括外部环境协同机制设计、行业发展协同机制设计、技术协同机制设计,从而保障企业知识生态系统正常运行.     

机载嵌入式可重构信号处理系统设计

为使机载嵌入式信号处理系统性能更加均衡,更好地适应机载嵌入式环境,在比较三种传统的机栽信号处理系统架构的基础上,提出了一种系统可伸缩、功能可重构的信号处理系统架构,并分析了其系统特性和关键技术。从可编程能力、处理性能、通用性以及可扩展性等方面比较了三种信号处理系统架构,结果表明:可重构信号处理系统架构具有较强的综合性能,能更好地满足机载嵌入式应用的需求。     

机载系统NANDFlash存储技术

为了发挥NANDFlash在机载环境中非易失性、体积小、固态性、重量轻、低功耗、抗震动等特点,介绍了NANDFlash的存储特性,对NANDFlash存储的关键技术进行了改进,提出了基于域机制的地址映射方式和基于阈值的损耗均衡方法,为机载系统能够更加可靠、实时和安全地进行数据存储提供了选择。     

航空发动机低压转子系统的“可容模态”设计及实验验证

建立了带弹性支承和阻尼器的航空发动机低压柔性转子动力学模型,进行了模态计算以及临界转速处的响应计算。在考虑临界转速约束与“临界跟随”现象约束的条件下,综合模态不平衡影响因子、弹支应变能占比以及套齿连接结构稳定性构造了可容度评价函数,建立了低压转子系统的“可容模态”优化设计方法。设计并搭建了低压转子实验系统,从模态测试实验、阻尼器减振实验以及长时间“共振”实验,验证了设计方法的可靠性。研究结果为计算的临界转速与实际测量的临界转速最大误差为3.86%,阻尼器在1阶与2阶临界转速处的减振比最大可达45.6%,实验转子系统在1阶与2阶临界转速处各完成了长达412.5 s和429.8 s的“共振”实验,共振过程中转子系统各通道振动单峰值稳定在100μm以内,且无次谐波产生。表明了所建立的航空发动机低压转子系统“可容模态”优化设计方法是可行的。