基于IMU辅助的高动态GPS信号捕获算法

高动态环境存在较大的多普勒频移,传统的GPS信号捕获方法捕获时间较长。为了快速捕获到信号,提出将惯性测量单元(InertialMeasurementUnit,IMU)辅助与快速傅里叶变换(FFT)相结合的快速捕获算法。该算法通过外部IMU的位置、速度辅助,预先估算高动态载体产生的多普勒频移,缩小频率搜索范围;利用二维FFT方法同时搜索码相位和多普勒频率,降低计算复杂度,加快捕获速度。仿真结果表明该算法可以显著减少捕获时间,提高捕获性能。     

W波段FMCW体制ISAR系统成像及试验验证

毫米波雷达具有高分辨率、小型化、轻型化等特点,是现代雷达应用的一个重要发展方向。随着W波段元器件的突破,W波段逆合成孔径雷达(ISAR)系统的研究引起了世界发达国家的重视。W波段ISAR图像分辨率高,目标散射细节更丰富,可提高目标分类、识别精度,在军民领域均有很大的应用价值。介绍了一种W波段调频连续波(FMCW)体制ISAR系统,探讨了该体制ISAR系统性能并介绍了W波段FMCW ISAR成像处理算法。该系统发射信号中心频率为94 GHz,带宽为5 GHz。利用该系统开展了ISAR转台试验,并利用RD算法得到了ISAR系统初步成像结果。     

运动的核弹比静止的核弹威力小?——多普勒效应、红移、光行差和动体的质能当量关系

证明爱因斯坦立足于光速不变假设和长度收缩假设的洛伦茨变换未能正确地解释多普勒效应、红移和光行差现象;他也未能给出正确的动体的质能当量关系.作者立足于完全符合相对性原理的伽利略变换,成功地解决了上述问题.     

Singularity analysis for single gimbal control moment gyroscope system using space expansion method

Control Moment Gyroscope (CMG) is an effective candidate for agile satellites and large spacecraft attitude control because of its powerful torque amplification capability. The most serious situation, however, in using CMG is the inherent geometric singularity problem, where there’s no torque output along a particular direction. Space expansion method has been proposed in this work for the singularity analysis. Based on inverse mapping transformation, an expanded Jacobian matrix which is a full rank square matrix is obtained. The singular angle sets of the 3-parallel cluster and pyramid cluster are distinguished using space expansion method. An effective hybrid steering strategy, able to deal with the elliptic singularity, is further proposed. Simulation results demonstrate the excellent performance of the proposed steering logic compared to the generalized singular robust logic and pseudo inverse logic in terms of energy consumption and torque error.     

航空维修多媒体辅助培训

阐述了MCBT开发的必要性、主要优点、发展前景和面临的主要问题,提出了使全行业尽快了解和重视这一工作,加强MCBT的开发步伐,促进航空维修及其培训水平的快速提高的看法.     

基于放大因子与Spalart-Allmaras湍流模型的转捩预测

为了验证放大因子输运方程与Spalart-Allmaras(S-A)湍流模型耦合对转捩现象的模拟精度,选取Schubauer and Klebanoff(S-K)平板、S809低速翼型、30p30n多段翼型以及复杂的三维HiLiftPW-1构型进行自由转捩计算,并将计算结果与实验进行比较分析,其中针对S809算例,还与Langtry-Menter(L-M)转捩模型进行了比较.算例结果表明:放大因子输运方程与S-A湍流模型的耦合能够较好的捕捉转捩位置以及转捩发展过程,对分离泡诱导的转捩的模拟相比L-M转捩模型更精确,转捩位置的捕捉精度提升了10%;对比实验,多段翼转捩位置的捕捉误差最大为6.5%;针对三维高升力增升构型,以实验作为参考,全湍流计算与考虑边界层转捩的对比显示考虑边界层转捩能够更加精确的模拟气动力系数,升力和表面摩擦阻力系数的模拟精度精度提升1%.      

BPM授时信号传输损耗的仿真建模

为了适应BPM发播系统升级改造,需要远场监测BPM授时信号的场强,因此有必要研究短波信道传输损耗,建立适当的计算模型。通过分析现有传输损耗理论模型,综合考虑地波、天波对BPM授时信号传输损耗的影响,在Labwindows/CVI开发环境下设计了BPM授时信号场强预测软件。通过将预测值与实测值比较,表明了该软件的可行性和准确性,可用于BPM授时信号场强的远场监测。     

基于ZigBee的星内无线通信网络研究与设计

为研究星内网络从有线线缆到无线网络的可行性,分析星内无线通信的需求,针对卫星通信特点设计并实现了一个典型的星型ZigBee无线通信网络,对星内无线通信协议和传输性能进行了测试.实验结果表明所设计的无线通信网络能够满足星内无线通信对于低数据率、近距离的敏感器和部分执行机构的组网需求,并且网络性能稳定.     

Effect of Semi-solid Isothermal Heat Treatment on Microstructure of VW63Z Alloy

The effects of isothermal heat treatment on the semi-solid microstructure evolution of VW63Z (Mg-6Gd-3Y-0.4Zr, wt.%) alloy are studied. It shows that the microstructure of VW63Z alloy could transform from equiaxed crystal to semi-solid spherical crystal after isothermal heat treatment above 620 ºC. With the heating temperature elevating from 620 ºC to 635 ºC and the holding time prolonging from 10 min to 35 min, the liquid fraction increases gradually. The semi-solid microstructure evolution of VW63Z alloy can be divided into three stages, i.e., particle coarsening and spheroidization;particle necking, coalescence, and Ostwald ripening;and dynamic equilibrium. The semi-solid process window of VW63Z alloy ranges from 620 ºC to 635 ºC, where the best process parameters are holding at 635 ºC for 20 min?30 min. The solid fraction, the average particle size, and the shape factor are 41.1%?53.8%, 81.5 μm?83.2 μm, and 0.70?0.75, respectively. The maximum relative deviations of the solid fraction, the particle size, and the shape factor at different heights of the same billet are 44.6%, 17.4%, and 16.6%, respectively, which means that it should pay attention to the uniformity of edge and core of VW63Z alloy during isothermal heat treatment. The driving force of microstructure is supposed to be the reduction of solid-liquid interface free energy.     

基于当地变量的横流转捩预测模型的研究与改进

Langtry和Menter提出的转捩预测模型需要改进以具备预测横流转捩的能力。当地变量Helicity参数可以指示边界层内的横流信息,因而可用来构造适用于复杂构型以及当代计算流体力学(CFD)并行计算的横流转捩预测模型。实现了基于Helicity参数的横流转捩预测模型,对于后掠角为45°的NLF(2)-0415无限展长后掠翼,模型能够预测不同雷诺数对横流转捩的影响,但是对6:1椭球的横流转捩预测结果与试验数据相差较多。针对实现的横流转捩预测模型的缺点,考虑横流速度因素进行改进。横流速度的求解经过简化近似可以当地求解,因而保证了改进的模型完全基于当地变量的优势。采用改进后的横流转捩预测模型分别对NLF(2)-0415机翼、6:1椭球以及DLR-F5机翼进行数值模拟,并与试验数据进行对比分析,结果显示改进后的横流转捩预测模型可以较为准确地捕捉横流转捩现象。