Performance Analysis and Power Allocation for Cooperative SSK System with Receive Correlation in Rayleigh Fading Channel

In this paper,the performance analysis of cooperative space shift keying(SSK)system with dual-hop amplify and forward(AF)in receive-correlated Rayleigh channel is presented. By means of the performance analysis,a closed-form approximate expression of the average bit error rate(BER)is derived for the performance evaluation.With this expression,in a high signal-to-noise-ratio(SNR)region,a tight closed-form asymptotic BER of the system is also derived. It can simplify the calculation of average BER and provide effective evaluation for asymptotic performance. By minimizing this asymptotic BER expression,a suboptimum power allocation(PA) scheme is developed,and the closed-form PA coefficients are obtained. Simulation indicates that the suboptimal PA scheme outperforms the conventional equal PA scheme,and its performance is very close to that of the exhaustive search based optimal PA scheme but with low complexity. Moreover,the system performance under the spatially correlated channel is worse than that in spatially independent channel due to the effect of spatial correlation.     

大型载人空间基础设施商业化运营模式初探

为提高以空间站为代表的大型载人空间基础设施运行效率和运营效益,本文在研究国际空间站(ISS)在轨运营模式及商业化做法的基础上,针对我国现有空间基础设施的在轨运营特点、国家战略和社会商业化需求,提出了引入社会资本建立商业化运营模式和建立商业成果转化基金等建议,成立专门的商业化运营管理机构,进行统筹管理和商业化运营,探索形成一套职责清晰、高质高效、效益突出的商业化运营管理体系,既保证空间基础设施在轨健康运行,高效开展各类空间应用,又降低建设和运营成本。在孕育商业模式和创新项目促进经济社会发展的同时,也具有重要的现实意义和深远的社会效益。     

基于2.5维小型化设计的UHF频段高性能超材料吸波体

提出一种基于2.5维小型化设计的高性能超材料吸波体,其吸波频带覆盖全球范围内超高频射频识别(Ultrahigh-frequency radio frequeny identification,UHF-RFID)系统工作频段。该吸波体结构借助多个金属化过孔增加回路电长度进行小型化并拓展吸波带宽,通过单独调节上下表面衰减电阻阻值缩小此过程中介质板厚度带来的极化差异。单元尺寸被缩小至13.6 mm×13.6 mm,约为中心频率波长的1/60。仿真和实验结果表明,该2.5维小型化高性能超材料吸波体在840～960 MHz的频带范围内平均吸收率超过99%,相比已公开文献,95%吸波带宽提高45%以上,可用于改善受限空间中RFID系统的可靠性。     

基于ATSUKF算法的卫星姿控系统故障估计

针对卫星姿态控制过程中可能发生的执行机构或敏感器故障,提出了一种基于无损卡尔曼滤波（UKF）及偏差分离原理的自适应二阶无损卡尔曼滤波（ATSUKF）算法。首先,提出TSUKF算法,通过UKF处理姿态机动时的非线性并通过偏差分离原理将非线性系统的状态及故障分别估计,避免非线性模型的线性化过程同时降低了计算过程中的矩阵维度。然后,在TSUKF算法的基础上提出了ATSUKF算法,通过滑动窗口内的残差计算自适应矩阵,使滤波器在统计特性不准确的情况下仍然具有较快的收敛速度,特别适用于卫星快速机动过程中的姿态与故障估计。数值仿真结果表明,ATSUKF算法相较于TSUKF算法能有效降低统计特性不准对系统造成的不利影响,实现卫星姿态、执行机构/敏感器故障的快速估计。     

盘式对转永磁风力发电机设计与分析

针对现有风力发电系统普遍存在的工作风速范围较窄、风能利用率较低等问题,设计了一种盘式双转子对转永磁风力发电机,双转子对转运行。在介绍该电机的结构与运行原理的基础上,推导了电机功率尺寸方程,给出了该电机的初步设计方法。利用有限元软件对电机进行了三维建模和动态仿真分析,得到其磁路特点和电磁性能,验证了所提设计方法的有效性。     

A self-healing strategy with fault-cell reutilization of bio-inspired hardware

The self-healing strategy is a key component in designing the bio-inspired embryonics circuit with the structure of cell arrays. However, the existing self-healing strategies of embryonics circuits mainly focus on permanent faults inside the modules of cells such as the function module and the configuration register, while little attention is paid to transient faults. From the point of view of obtaining high efficiency of hardware utilization, it would be a huge waste of hardware resources by permanent elimination when a cell only suffers a transient fault which can be repaired by a configuration mechanism. A new self-healing strategy, the Fault-Cell Reutilization Self-healing Strategy(FCRSS) which presents a method for reusing transient fault cells, is proposed in this paper. The circuit structures of all the modules in the cells are described in detail. In the new strategy, two processes of elimination and reconfiguration are combined. Within the process of fault-cell elimination, cells with transient faults in the embryonics circuit array could be reused simultaneously to replace the functions of the cells on their left side in the same row. Therefore, transient fault-cells in a transparent state can be reconfigured to realize the fault-cell reutilization. Finally,a circuit simulation, resource consumption, a reliability analysis and a detailed normalization analysis are presented. The FCRSS can improve the hardware utilization rate and system reliability at the expense of a small amount of hardware resources and reconfiguration time. Following the conclusion, the method of determining the optimal self-healing strategy is presented according to the environmental conditions.     

Event-triggered adaptive control for attitude tracking of spacecraft

Plug-and-play technology is an important direction for future development of spacecraft and how to design controllers with less communication burden and satisfactory performance is of great importance for plug-and-play spacecraft. Considering attitude tracking of such spacecraft with unknown inertial parameters and unknown disturbances, an event-triggered adaptive backstepping controller is designed in this paper. Particularly, a switching threshold strategy is employed to design the event-triggering mechanism. By introducing a new linear time-varying model, a smooth function, an integrable auxiliary signal and a bound estimation approach, the impacts of the network-induced error and the disturbances are effectively compensated for and Zeno phenomenon is successfully avoided. It is shown that all signals of the closed-loop system are globally uniformly bounded and both the attitude tracking error and the angular velocity tracking error converge to zero. Compared with conventional control schemes, the proposed scheme significantly reduces the communication burden while providing stable and accurate response for attitude maneuvers. Simulation results are presented to illustrate the effectiveness of the proposed scheme.     

航空高速锥齿轮行波共振的噪声与动应力测试研究

为了获取涡轴发动机附件传动齿轮工作状态下的振动特性,采用声波导管的噪声测量方法和应用电阻应变计测量齿轮动应力的技术,得到了齿轮行波共振转速和频率以及全转速范围的动应力数据。试验结果表明:声波导管的噪声测量方法能够准确测量齿轮的行波共振转速及频率,行波共振时电阻应变计能够准确测量出齿轮动频;被测锥齿轮在运行转速范围内存在多个节径行波共振,最大分频动应力在五节径后行波处,幅值约为115MPa。     

氢气对正己烷-空气燃爆性能的影响

为了研究氢气对正己烷燃爆性能的影响,在定容燃烧室内实验测量了初始温度为353K,初始压力为100kPa,当量比0.7～1.7,掺氢比0%～80%时,正己烷-氢气-空气混合气的爆炸过程,得到了氢气对火焰传播规律、层流燃烧速率及爆炸压力的影响。研究结果表明,当量比从0.7增加到1.7,无拉伸火焰传播速率和层流燃烧速率呈先增大后减小的趋势,在当量比1.0附近达到最大;随着掺氢比的提高,混合气的燃烧速率明显增大,有利于提高燃料的燃烧效率,当量比为1.0时,掺氢比80%的混合气层流燃烧速率比正己烷-空气混合气提高了2.5倍;同时,掺氢比对混合气的爆炸压力与最大爆炸压力上升速率有明显的影响,对过稀或过浓燃料的影响尤为显著。     

软件定义网络在无人机地面站的应用研究

借鉴软件定义网络（SDN）的思想,提出一种网络智能流量控制方法并研制出智能流量控制软件。它综合采用网络态势感知技术、显式拥塞通告技术、数据中心传输控制协议和多队列调度技术来实现了网络态势动态感知和网络流量全局控制。该软件在半实物仿真软件定义网络环境中进行了测试,测试结果满足了预期的指标;该软件还在某无人机地面站中进行了验证,显著提高了测控数据在网络中传输的确定性。