GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

类IXV飞行器初期再入制导与姿态控制方法研究

摘要： 针对类IXV飞行器无翼式升力体构型及采用RCS/尾襟翼组合控制特点,研究其初期再入段的高精度制导与姿态控制方法.设计带过程约束的数值预测 校正制导律以提高制导系统的鲁棒性及精确性;根据其执行机构配置特点,设计基于RCS的航向控制律及基于RCS/气动舵的纵、横向复合控制律,并采用鲁棒伺服LQR技术进行控制参数快速设计.通过蒙特卡洛打靶仿真来验证算法的精度及鲁棒性.     

由“纯语言”看解构主义翻译观——读本雅明《译者的任务》

通过分析和探讨“纯语言”这一重要概念,评述解构主义翻译观的实质。     

测定电离复合速率常数的激波管方法

发展了测定电离复合速率常数的一种新的激波管方法。在这一方法中使用反射激波加热预混气体使之电离,相继用可控制的强稀疏波使之快速冷却,冷却速度很快,可达106K/s, 使之在冷却过程中,电离远离平衡态。用压电传感器和Langmuir 探针监测状态变化历程和离子浓度,并可获得过程中所有的状态参数。测定了NO e 电离复合速率常数。实验表明这一方法简易可靠     

燃烧室头部激励的等离子体强化燃烧特性实验研究

等离子体助燃是一种新型的强化燃烧技术,近年来受到国内外学者的广泛关注。本文开创性地研制了基于旋转滑动弧等离子体的强化燃烧头部,建立了某型航空发动机三头部燃烧室实验件的等离子体助燃实验平台,验证了该等离子体强化燃烧技术应用于型号发动机燃烧室的可行性。实验研究等离子体助燃在不同余气系数和不同输入电压条件下对平均出口温度、燃烧效率、温度分布系数以及熄火边界的影响。实验结果表明,与正常燃烧相比,施加等离子体助燃后的燃烧效率有明显的提高,在输入电压为U0=240V,余气系数为 α=0.8时,等离子体助燃的燃烧效率提高3.24%。实施等离子体助燃后,燃烧室出口温度分布场分布得到明显的改善,在富油工况α=0.8,出口温度分布系数减少39.8%。等离子体助燃输入电压越高熄火边界扩展程度越明显,相比于正常工况条件下,等离子体助燃U0=240V的熄火边界扩宽了7.34%。     

新型低密度Nb-Ti合金抗氧化涂层制备及组织性能分析

针对新型低密度Nb-Ti合金抗氧化性能需求,开展了Si-Cr-Ti系抗氧化涂层研究,重点分析了所制备涂层抗氧化性能和微观组织在氧化前后的变化。结果表明,1 200℃下涂层寿命大于10 h,涂层抗热震性能良好;涂层与基体之间形成一层扩散层,保证了涂层的结合强度;在高温大气环境下,涂层表面生成一种隔绝氧气填补涂层表面空隙的玻璃质SiO_2层,因而具有良好的抗氧化性能。     

桁架结构的静动态特性有限元分析

通过对桁架结构的静、动态分析,探讨如何建立桁架的有限元模型及计算方法,并利用MSC．Patran／Nastran程序对该结构进行静、动态分析计算,计算结果与实际情况吻合。     

卫星控制系统测试数据自动判读系统设计

针对卫星控制系统测试数据类型多和数据量大的特点,人工判读方式存在判读时间长和判读精度不够高等不足,分析了卫星控制系统测试数据的变化规律,建立了测试数据的判读规则,在此基础上完成自动判读方法设计和自动判读系统设计,该系统能够按照设置的判读规则进行自动判读,对判读结果进行实时显示和存储,提高了测试效率和判读的准确性.     

多级压气机中可控扩散叶型研究的进展与展望 第二部分 可控扩散叶型的实验与数值模拟

目前 ,大量的可控扩散叶型 (CDA)已设计应用于多级轴流压气机中。通过亚音、跨音叶栅实验 ,证明了在可比的气动设计条件下 ,CDA叶栅可以达到更高的临界马赫数、更大的冲角范围和更高的负荷。通过单级或多级测试 ,CDA提供了更高的效率、更高的负荷、且易于进行级间匹配 ,并最终减少研发费用 ,提高喘振裕度 ;由于 CDA叶型具有增厚的前缘和尾缘 ,这为压气机寿命的提高提供了保证     

某型涡轮轴发动机稳态气路故障诊断方法

本文是涡轮轴发动机稳态气路故障诊断方法研究的结果。根据监控功能要求 ,应用气路参数分析法 ,确定反映部件性能参数变化的测量参数 ,建立故障诊断模型 ,探讨分别应用 6个和 4个测量参数诊断气路部件故障的方法