Human productivity in space and systems costs

Human productivity during assembly operations in-orbit is dependent on limits set by fatigue, metabolic rates, learning, and assembly techniques. In order to quantify these effects, tests were conducted in the NASA MSFC Neutral Buoyancy Simulator, in the NASA KC-135 in parabolic flight, and in space with the EASE program during the Shuttle Atlantis mission 61-B. A separate program attempted to relate productivity to system costs. Because of the surprisingly high productivity which had been demonstrated in orbit, it was shown that assembly operations would have only a small effect on system costs at the present level of launch costs. The results of these continuing studies have been reported in a recent paper(1). They will be briefly summarized here and the results updated to include additional cost elements and to examine the effects of reductions in transportation costs, resulting from advances in technology and from increased demand, on system costs. It is shown that, as launch costs are reduced, the assembly costs could become an increasingly important component of the total system costs.     

Spatial orientation during locomotion [correction of locomation] following space flight

To investigate changes in spatial orientation ability and walking performance following space flight, 7 astronaut subjects were asked pre- and post-flight to perform a goal directed locomotion paradigm which consisted of walking a triangular path with and without vision. This new paradigm, involving inputs from different sensory systems, allows quantification of several critical parameters, like orientation performance, walking velocities and postural stability, in a natural walking task. The paper presented here mainly focusses on spatial orientation performance quantified by the errors in walking the previously seen path without vision. Errors in length and reaching the corners did not change significantly from pre- to post-flight, while absolute angular errors slightly increased post-flight. The significant decrease in walking velocity and a change in head-trunk coordination while walking around the corners of the path observed post-flight may suggest that during re-adaptation to gravity the mechanisms which are necessary to perform the task have to be re-accomplished.     

The effect of head-down tilt on brain potentials related to visual attention

To study the possible effect of simulated weightlessness on brain function state, the brain event-related potentials (ERPs) in a simple visual selective response task were compared between HDT and HUT in 9 normal subjects. The results were: The Target(T) and non-Target(NT) flash signals both induced significant slow positive potentials which were supposed to related to the attention state; the amplitude of the positive potentials in frontal regions decreased significantly especially for NT-ERPs during HDT comprared with that during HUT. The data reported provide new evidence indicating that more attention should be paid on the brain function study during space flight.     

Highly mobile space suit material optimization

This paper discusses the factors that control the flexibility of fabric space suit elements by examining a bending model of a pressurized fabric tube. Results from the model are used to evaluate the current direction in highly mobile EVA glove research and suggest that changes are necessary in the suit and glove fabric selection methodology.     

Simulation of a working process in the pulsejet engine with an aerodynamic valve on the basis of the thermodynamic cycle analysis

A physical and a mathematical model of a working process in the pulsejet engine based on the analysis of the thermodynamic cycle are proposed. The process of self-sustained periodic combustion is connected with special features of elementary processes comprising the cycle, influencing the engine operation and depending on its design parameters. The calculation method is based on the use of fundamental laws of conservation and basic equations of gas dynamics     

Experimental Aspects of Mid-Frequency Pulsations (f≈10–100 mHz) in the Southern Polar Cap

We review the results obtained in the frequency range of Pc3 (22-100 mHz) and Pc4 (7-22 mHz) pulsations at Italian Antarctic stations in the southern polar cap (“Mario Zucchelli”, at Terra Nova Bay, TNB, 80^˚.S; “Concordia”, the Italian/French base at Dome C, DMC, 89^˚.S). The absence of a midnight enhancement in the pulsation power suggests a negligible substorm influence at extreme latitudes, while the sharp noon enhancement, which appears only at TNB, is determined by the closer proximity of the station to cusp related phenomena. The relationship between the frequency of the band-limited signals and the interplanetary magnetic field strength, the cone angle influence, and the higher correlation of the Pc3 power with the solar wind speed in the morning hours suggest a global scenario in which upstream waves would be mainly responsible for the mid-frequency activity in the polar cap. However, the polarization pattern is odd with respect to the predictions for tailward propagating modes.     

Radar ECCM: A European Approach

The radar designer must optimize parameters for performance in electronic countermeasures (ECM) and avoid any constraints which could be exploited by ECM. ECM/electronic counter-counter measures (ECCM) strategy must take into account electromagnetic compatibility (EMC) including enemy EMC. Electronic scanning improves search performance, but also reduces ECCM performance in other ways. While electronic scanning avoids some constraints, it imposes others, particularly in the frequency domain. It is argued that simple radars of good performance may be as cost effective in ECM as more complex systems. Some examples of recent developments are given.     

绿色制造中的干切削技术

冷却润滑液的存储、使用以及废弃处理需要专门的物流系统,因而费用很高;冷却润滑液处理不当会对人的健康以及环境造成危害;工件经过湿加工后必须进行清洁处理,这都费时费力,同时增加了对系统的要求.基于上述原因,近年来干切削技术受到广泛关注.     

The atmosphere of Jupiter

Current information on the neutral atmosphere of Jupiter is reviewed, with approximately equal emphasis on composition and thermal structure on the one hand, and markings and dynamics on the other. Studies based on Pioneer 10 and 11 data are used to refine the atmospheric model. Data on the interior are reviewed for the information they provide on the deep atmosphere. The markings and dynamics are discussed with emphasis on qualitative relationships and analogies with phenomena in the Earth's atmosphere.Contribution No. 2652 of the Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, Calif. 91125, U.S.A.     

High Excitation ISM and Gas

An overview is given of ISO results on regions of high excitation ISM and gas, i.e. HII regions, the Galactic Centre and Supernova Remnants. IR emission due to fine-structure lines, molecular hydrogen, silicates, polycyclic aromatic hydrocarbons and dust are summarised, their diagnostic capabilities illustrated and their implications highlighted. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.