X-ray and gamma-ray observations of a white-light flare

HEAO-1 observed hard radiations (X- and gamma-rays) from a major solar flare on 11 July 1978. The observations showed gamma-ray line and continuum emission extending to the highest energy observed. The lines are identified with the 2.2 MeV line of deuterium formation and the 4.4 MeV line of inelastic scattering on ¹²C, both previously observed in the flares of August 1972 [1]. The 11 July flare was identified as a white-light flare by observations at Debrecen [2]. It thus provides the first opportunity for a detailed examination of white-light flare theories that depend upon proton heating of the photosphere. The line strength over a four-minute integration at 2.2 MeV was 1.00 ± 0.29 ph(cm² sec)⁻¹, and the gamma-ray emission (excluding the 2.2 MeV line which was appreciably delayed) lagged by less than 20 sec approximately after the hard X-ray and microwave fluxes. We conclude that the “second-stage” acceleration of high-energy solar particles must commence promptly after the impulsive phase.     

A search for chiral signatures on Mars

It is thought that the chiral molecules of living material can induce circular polarization in light at levels much higher than expected from abiotic processes. We therefore obtained high quality imaging circular polarimetry of the martian surface during the favorable opposition of 2003 to seek evidence of anomalous optical activity. We used two narrow-band filters covering 43% of the martian surface, 15% of it in-depth. With polarization noise levels <0.1% (4.3 upper limits 0.2-0.3%) and spatial resolution 210 km, we did not find any regions of circular polarization. When data were averaged over the observed face of the planet, we did see a small non-zero circular polarization 0.02%, which may be due to effects associated with the opposition configuration though it is at the limit of the instrumental capability. Our observations covered only a small fraction of parameter space, so although we obtained a null result, we cannot exclude the presence of optical activity at other wavelengths, in other locations, or at higher spatial resolution.     

Gravity and perceptual stability during translational head movement on earth and in microgravity

We measured the amount of visual movement judged consistent with translational head movement under normal and microgravity conditions. Subjects wore a virtual reality helmet in which the ratio of the movement of the world to the movement of the head (visual gain) was variable. Using the method of adjustment under normal gravity 10 subjects adjusted the visual gain until the visual world appeared stable during head movements that were either parallel or orthogonal to gravity. Using the method of constant stimuli under normal gravity, seven subjects moved their heads and judged whether the virtual world appeared to move “with” or “against” their movement for several visual gains. One subject repeated the constant stimuli judgements in microgravity during parabolic flight. The accuracy of judgements appeared unaffected by the direction or absence of gravity. Only the variability appeared affected by the absence of gravity. These results are discussed in relation to discomfort during head movements in microgravity.     

Electrostatic Noise Spectrum at the Electron Cyclotron Frequency and Electromagnetic Emission in the Inhomogeneous Plasma of the Topside Ionosphere

Measurements of the wave emission of the topside ionosphere made onboard the APEX satellite using the electric component of the wave field in the 0.1–10 MHz frequency band are presented. At middle latitudes a wave intensity decrease was observed in the broad-band spectrum of the electrostatic noise at the electron cyclotron frequency. It is shown that a break in the spectrum of electrostatic modes at the electron cyclotron frequency (the absence of the plasma eigen-frequencies) may be a cause of the observed effect. The increase of the intensity at the electron cyclotron frequency in the ionospheric trough and at latitudes above the trough region as compared to middle latitudes may be explained by the capture by plasma irregularities of the electromagnetic emission of the auroral electron fluxes.__________Translated from Kosmicheskie Issledovaniya, Vol. 43, No. 3, 2005, pp. 201–208.Original Russian Text Copyright © 2005 by Izhovkina, Prutensky, Pulinets, Kiraga, Klos, Rothkael.     

Entrapment of bacteria in fluid inclusions in laboratory-grown halite

Cells of the bacterium Pseudomonas aeruginosa, which were genetically modified to produce green fluorescent protein, were entrapped in fluid inclusions in laboratory-grown halite. The bacteria were used to inoculate NaCl-saturated aqueous solutions, which were allowed to evaporate and precipitate halite. The number, size, and distribution of fluid inclusions were highly variable, but did not appear to be affected by the presence of the bacteria. Many of the inclusions in crystals from inoculated solutions contained cells in populations ranging from two to 20. Microbial attachment to crystal surfaces was neither evident nor necessary for entrapment. Cells occurred exclusively within fluid inclusions and were not present in the crystal matrix. In both the inclusions and the hypersaline solution, the cells fluoresced and twitched, which indicates that the bacteria might have remained viable after entrapment. The fluorescence continued up to 13 months after entrapment, which indicates that little degradation of the bacteria occurred over that time interval. The entrapment, fluorescence, and preservation of cells were independent of the volume of hypersaline solution used or whether the solutions were completely evaporated prior to crystal extraction. The results of this study have a wide range of implications for the long-term survival of microorganisms in fluid inclusions and their detection through petrography. The results also demonstrate the preservation potential for microbes in hypersaline fluid inclusions, which could allow cells to survive harsh conditions of space, the deep geologic past, or burial in sedimentary basins.     

A novel framework for liquid propellant engine’s cooling system design by sensitivity analysis based on RSM and multi-objective optimization using PSO

One of the challenges of combustion chamber and nozzle design in a Liquid Propellant Engine (LPE) is to predict the behavior and performance of the cooling system. Therefore, while designing, the optimization of the cooling system is always of great importance. This paper presents the multi-objective optimization of the LPE’s cooling system. To this end, a novel framework has been developed, resulting from the application of the Response Surface Method (RSM) and the correlation coefficients matrix, sensitivity analysis and the The Particle Swarm Optimization (PSO). based on this method, the input variables, constraints, objective functions, and their surfaces were identified. In terms of multi-optimization algorithms, RSM and PSO are utilized to get global optimum. In conclusion, the methodology capability is to optimize the LPE’s cooling system, 6 percentage increase in total heat transfer and 7 bar decrease cooling system pressure loss, which resulted in a 1.2-seconds increase in the specific impulse of the engine.     

可变速发电机对多机电力系统的稳定性提高的影响

阐述了可变速发电机(ASG)对多机电力系统的稳定性提高有着明显的效果。为了利用电力系统模拟仿真器进行实时仿真，开发了基于个人计算机(PC)的可变速发电机模组。通过将Matlab／Simulink环境下建立的ASG三相瞬时值模型装到PC里的数字处理器(DSP)板上运行，来实现更为详细的实时仿真。通过DSP板上的AD／DA转换接口，对基于PC的ASG模组与电力系统模拟仿真器等实施了物理连接，进行了多机电力系统的实时仿真．所有的仿真结果均显示，引入可变速发电机后，多机电力系统的整体稳定性有了大幅度的提高．     

Effect of Thermal Treatment on CFRP Parts Before and After Adhesive Bonding

Numerous non-destructive techniques are being investigated for assuring quality of the adhesive bonds.The research presented here is focused on non-destructive assessment of carbon fibre reinforced polymer(CFRP)parts.The surface condition directly influences the performance of adhesive bonds.The structural joints should ensure safe usage of a structure.However,some modifications of the surface may lead to weak bond that cannot carry the desired load.This is why there is a search for methods of surface assessment before bonding.Moreover,reliable techniques are required to allow to verify the integrity of the adhesive bond after manufacturing or bonded repair.We focus on the laser induced fluorescence(LIF)method for assessing the surface state.The LIF is a noncontact measurement method.In the context of adhesive bond assessment the electromechanical impedance(EMI)method is studied.The EMI uses surface bonded piezoelectric sensors for excitation and sensing.The investigated samples were made of CFRP layers.The samples were treated at elevated temperatures.The influence of the thermal treatment was studied using LIF.The thermal treatment at 220℃could be clearly distinguishedrom the rest of the considered samples.The thermally treated plates were bonded to untreated plate and then they were measured with the EMI method to study the influence of the treatment on the adhesive bond.The changes of EMI spectra were significant for the treatment at 280 ℃ and for some thermally treated samples that were later contaminated with de-icing fluid.     

The effect of radiation on the long term productivity of a plant based CELSS.

Mutations occur at a higher rate in space than under terrestrial conditions, primarily due to an increase in radiation levels. These mutations may effect the productivity of plants found in a controlled ecological life support system (CELSS). Computer simulations of plants with different ploidies, modes of reproduction, lethality thresholds, viability thresholds and susceptibilities to radiation induced mutations were performed under space normal and solar flare conditions. These simulations identified plant characteristics that would enable plants to retain high productivities over time in a CELSS.