On management and control of turbulent shear flows

Concepts of turbulent flow control have become of growing importance during the last few years, following increased interest in the detailed structural scenario of turbulence—in particular our improved understanding of coherent structures on the one hand (the prerequisite), and a need for improvement of technological processes on the other (the goal). These considerations have mainly been followed by engineers and physicists concerned with problems in aerodynamics. It is our aim to draw the attention of a wider group of engineers to turbulent flow control in order to speed up the transfer of knowledge from aerodynamics to applications in other fields of engineering.

In this paper an attempt is made to compile a major body of the available knowledge on flow control in separated and wall bounded turbulent flows. After a brief introduction of the basics of control theory (Section 2) and of the major flow structures and their stability characteristics (Section 3) free and wall bounded turbulent shear flows are discussed (Sections 4 and 5). This discussion summarizes the main relationships between structure and flow behaviour and shows possibilities of influencing properties of these flows such as increasing mixing or avoiding separation.     

Strength design model for thin-walled structures

In this paper, the finite element analysis of the stress-strain state for cylindrical structures is discussed. In this case, various fundamental hypotheses can be used in the framework of a model that is of interest for design and optimization. Numerical examples are presented to evaluate the possibilities of this model.     

Scanning Spaceborne Synthetic Aperture Radar with Integrated Radiometer

Spaceborne synthetic aperture radar systems are severely constrained to a narrow swath by ambiguity limitations. Here a vertically scanned-beam synthetic aperture system (SCANSAR) is proposed as a solution to this problem. The potential length of synthetic aperture must be shared between beam positions, so the along-track resolution is poorer; a direct tradeoff exists between resolution and swath width. The length of the real aperture is independently traded against the number of scanning positions. Design curves and equations are presented for spaceborne SCANSARs for altitudes between 400 and 1400 km and inner angles of incidence between 20° and 40°. When the real antenna is approximately square, it may also be used for a microwave radiometer. The combined radiometer and synthetic-aperture (RADISAR) should be useful for those applications where the poorer resolution of the radiometer is useful for some purposes, but the finer resolution of the radar is needed for others.     

Detectability Loss Due to "Greatest Of" Selection in a Cell-Averaging CFAR

Curves are presented showing the additional constant false-alarm rate (CFAR) loss which results when a "greatest of" logic is imple mented between the leading and lagging sets of reference cells. Thee analytical results for a square law detector and a Swerling case 1 fluctuating target are supplemented by simulation results for a nonfluctuating target, and envelope and logarithmic detector laws.     

Optimum Windows for Image Registration

Two-dimensional cross-correlation techniques are applied to the problem of image registration under the assumption of small geometric distortion. Optimum window functions are derived for two performance measures of interest: peak-to-sidelobe ratio and mean-square registration error. The latter is examined in terms of the contribution caused by noise and the contribution caused by geometric distortion. A generalized Lagrange multiplier approach is used to derive approximate solutions assuming random images. The case of Gaussian autocorrelation functions is examined in detail. Results of applying the theoretically derived window functions to real data are presented, showing significant improvement in correlator performance.     

Reduction in clamping force due to applied longitudinal load to aerospace structural bolted plates

The main purpose of the present work is to experimentally and numerically study why and how the magnitude of the bolt clamping force reduces in the aerospace structural bolted plates when they are subjected to a longitudinal tensile load. In the experimental method, a holed plate of aluminium alloy 7075-T6 was clamped using a single bolt fastener, and then tested under an increasing static longitudinal tensile load. The bolt clamping magnitude was determined by using the measured axial compressive strains of a steel bush placed between the nut and plate. Two clamped specimens with different initial clamping forces were studied. In each specimen the actual clamping forces were determined during the longitudinal loading on the plate. In the numerical method, a three-dimensional (3D) finite element model was generated in order to simulate and quantify the bolt clamping force in the plate model loaded in tension. Both experimental and numerical results showed that the clamping force reduces considerably in the aluminium bolted plates under the longitudinal tensile loading. This is because of the transverse contraction of the plate material that causes the clamped material to release from the initial compression, and as a result, the clamping force to relax.     

Cassini Radio Science

Cassini radio science investigations will be conducted both during the cruise (gravitational wave and conjunction experiments) and the Saturnian tour of the mission (atmospheric and ionospheric occultations, ring occultations, determinations of masses and gravity fields). New technologies in the construction of the instrument, which consists of a portion on-board the spacecraft and another portion on the ground, including the use of the Ka-band signal in addition to that of the S- and X-bands, open opportunities for important discoveries in each of the above scientific areas, due to increased accuracy, resolution, sensitivity, and dynamic range.This revised version was published online in July 2005 with a corrected cover date.