Mid-latitude thermospheric zonal winds during the equinoxes

The diurnal variation of the mid-latitude upper thermosphere zonal winds during equinoxes has been studied using data recently generated from CHAMP measurements from 2002 to 2004 using an iterative algorithm. The wind data was separated into two geomagnetic activity levels, representing high geomagnetic activity level (Ap > 8) and low geomagnetic activity level (Ap ? 8). The data were further separated into two solar flux levels; with F10.7 > 140 for high and F10.7 ? 140 for low. Geomagnetic activity is a correlator just as significant as solar activity. The response of mid-latitude thermospheric zonal winds to increases in geomagnetic disturbances and solar flux is evident. With increase in geomagnetic activity, midday to midnight winds are generally less eastward and generally more westward after the about midnight transitions. The results show that east west transitions generally occurred about midnight hours for all the situations analyzed. The west to east transition occurs from 1400–1500 MLT. Enhanced westward averaged zonal wind speeds going above 150 ms⁻¹ are observed in the north hemisphere mid-latitude about sunrise hours (∼0700–1100 MLT). Nighttime winds in the north hemisphere are in good agreement with previous single station ground observations over Millstone Hill. Improved ground observations and multi satellite observations from space will greatly improve temporal coverage of the Earth’s thermosphere.     

Constraining the mass of the black hole GX 339-4 using spectro-temporal analysis of multiple outbursts

We carried out spectro-temporal analysis of the archived data from multiple outbursts spanning over the last two decades from the black hole X-ray binary GX 339-4. In this paper, the mass of the compact object in the X-ray binary system GX 339-4 is constrained based on three indirect methods. The first method uses broadband spectral modelling with a two component flow structure of the accretion around the black hole. The broadband data are obtained from RXTE (Rossi X-ray Timing Explorer) in the range 3.0 to 150.0?keV and from Swift and NuSTAR (Nuclear Spectroscopic Telescope Array) simultaneously in the range 0.5 to 79.0?keV. In the second method, we model the time evolution of Quasi-periodic Oscillation (QPO) frequencies, considering it to be the result of an oscillating shock that radially propagates towards or away from the compact object. The third method is based on scaling a mass dependent parameter from an empirical model of the photon index ($\mathrm{\Gamma }$) – QPO ($\nu$) correlation. We compare the results at 90 percent confidence from the three methods and summarize the mass estimate of the central object to be in the range $8.28–11.89M_{\odot }$.     

Model-independent large-scale magnetohydrodynamic quantities in magnetic clouds

Magnetic clouds are the interplanetary manifestation of coronal mass ejections, which are transient expulsions of major quantities of magnetized plasma, from the Sun toward the heliosphere. The magnetic flux and helicity are two key physical magnitudes to track solar structures from the photosphere-corona to the interplanetary medium. To determine the content of flux and helicity in magnetic clouds, we have to know their 3D structure. However, since spacecrafts register data along a unique direction, several aspects of their global configuration cannot be observed. We present a method to estimate the magnetic flux and the magnetic helicity per unit length in magnetic clouds, directly from in situ magnetic observations, assuming only a cylindrical symmetry for the magnetic field configuration in the observed cross-section of the cloud. We select a set of 20 magnetic clouds observed by the spacecraft Wind and estimate their magnetic flux and their helicity per unit length. We compare the results obtained from our direct method with those obtained under the assumption of a helical linear force-free field. This direct method improves previous estimations of helicity in clouds.     

The OSIRIS-REx Thermal Emission Spectrometer (OTES) Instrument

The OSIRIS-REx Thermal Emission Spectrometer (OTES) will provide remote measurements of mineralogy and thermophysical properties of Bennu to map its surface, help select the OSIRIS-REx sampling site, and investigate the Yarkovsky effect. OTES is a Fourier Transform spectrometer covering the spectral range 5.71–100 μm (\(1750\mbox{--}100~\mbox{cm}^{-1}\)) with a spectral sample interval of \(8.66~\mbox{cm}^{-1}\) and a 6.5-mrad field of view. The OTES telescope is a 15.2-cm diameter Cassegrain telescope that feeds a flat-plate Michelson moving mirror mounted on a linear voice-coil motor assembly. A single uncooled deuterated l-alanine doped triglycine sulfate (DLATGS) pyroelectric detector is used to sample the interferogram every two seconds. Redundant ～0.855 μm laser diodes are used in a metrology interferometer to provide precise moving mirror control and IR sampling at 772 Hz. The beamsplitter is a 38-mm diameter, 1-mm thick chemical vapor deposited diamond with an antireflection microstructure to minimize surface reflection. An internal calibration cone blackbody target provides radiometric calibration. The radiometric precision in a single spectrum is \(\leq2.2 \times 10^{-8}~\mbox{W}\,\mbox{cm}^{-2}\,\mbox{sr} ^{-1}/\mbox{cm}^{-1}\) between 300 and \(1350~\mbox{cm}^{-1}\). The absolute integrated radiance error is \(<1\%\) for scene temperatures ranging from 150 to 380 K. The overall OTES envelope size is \(37.5 \times 28.9 \times 52.2~\mbox{cm}\), and the mass is 6.27 kg. The power consumption is 10.8 W average. OTES was developed by Arizona State University with Moog Broad Reach developing the electronics. OTES was integrated, tested, and radiometrically calibrated on the Arizona State University campus in Tempe, AZ.     

Multiobjective genetic optimization of Earth–Moon trajectories in the restricted four-body problem

In this paper, optimal trajectories of a spacecraft traveling from Earth to Moon using impulsive maneuvers (ΔV maneuvers) are investigated. The total flight time and the summation of impulsive maneuvers ΔV are the objective functions to be minimized. The main celestial bodies influencing the motion of the spacecraft in this journey are Sun, Earth and Moon. Therefore, a three-dimensional restricted four-body problem (R4BP) model is utilized to represent the motion of the spacecraft in the gravitational field of these celestial bodies. The total ΔV of the maneuvers is minimized by eliminating the ΔV required for capturing the spacecraft by Moon. In this regard, only a mid-course impulsive maneuver is utilized for Moon ballistic capture. To achieve such trajectories, the optimization problem is parameterized with respect to the orbital elements of the ballistic capture orbits around Moon, the arrival date and a mid-course maneuver time. The equations of motion are solved backward in time with three impulsive maneuvers up to a specified low Earth parking orbit. The results show high potential and capability of this type of parameterization in finding several Pareto-optimal trajectories. Using the non-dominated sorting genetic algorithm with crowding distance sorting (NSGA-II) for the resulting multiobjective optimization problem, several trajectories are discovered. The resulting trajectories of the presented scheme permit alternative trade-off studies by designers incorporating higher level information and mission priorities.     

High vertical resolution water vapour profiles in the upper troposphere and lower stratosphere retrieved from MAESTRO solar occultation spectra

An algorithm has been developed that retrieves water vapour profiles in the upper troposphere and lower stratosphere from optical depth spectra obtained by the Measurements of Aerosol Extinction in the Stratosphere and Troposphere Retrieved by Occultation (MAESTRO) instrument onboard the SCISAT satellite as part of the Atmospheric Chemistry Experiment (ACE) mission. The retrieval relies on ro-vibrational absorption of solar radiation by water vapour in the 926–970 nm range. During the iterative inversion process, the optical depth spectra are simulated at the spectral resolution and sampling frequency of MAESTRO using the correlated-k approximation. The Chahine inversion updates the water vapour volume mixing ratio (VMR), adjusting all retrieval layers simultaneously, to match the observed differential optical depth due to absorption by water vapour and ozone at each tangent height. This approach accounts for significant line saturation effects. Profiles are typically obtained from ∼22 km down to the cloud tops or to 5 km, with relative precision as small as 3% in the troposphere. In the lower stratosphere, the precision on water vapour VMR is ∼1.3 μmol/mol in an individual retrieval layer (∼1 km thick). The spectral capability of MAESTRO allows for the clear separation of extinction due to water vapour and aerosol, and for the fitting quality to be quantified and used to determine an altitude-dependent convergence criterion for the retrieval. In the middle troposphere, interhemispheric differences in water vapour VMR are driven by oceanic evaporation whereas in the upper troposphere, deep convection dominates and a strong seasonal cycle is observed at high latitudes.     

Improved kHz-SLR tracking techniques and orbit quality analysis for LEO missions

Satellite gravity field missions such as CHAMP, GRACE and GOCE are designed as low Earth orbiting spacecraft (LEO) with orbit heights of about 250–500 km. The challenging mission objectives require a very precise knowledge of the satellite orbit position in space. For these missions precise orbit information is typically provided by GPS satellite-to-satellite tracking (SST) observations supported by satellite laser ranging (SLR).     

行星际磁场与磁尾磁通量绳形成的关系

收集了Cluster卫星在2001-2005年间观测到的磁尾磁通量绳事件,并对磁通量绳(magnetic flux rope)形成及其内部磁场结构与行星际磁场(IMF)的关系作了统计研究.考虑磁通量绳被观测到时行星际磁场的条件,在所有73个磁通量绳事件中,行星际磁场By分量占有主导地位的事件有80%,且78%的事件具有与行星际磁场By分量相同方向的核心场.行星际磁场通过在磁层顶与地球磁场相互作用改变南北等离子体片内磁场相对方向,形成有利于磁通量绳形成的磁场位形,并且行星际磁场By分量的方向对磁通量绳内部核心场的方向具有决定性影响.从统计结果来看,磁通量绳的形成并不会依赖于行星际磁场Bz分量的方向.     

Determination of K,Ar, Cl,S, Si and Al flare abundances from RESIK soft X-ray spectra

The RESIK is a high sensitivity, uncollimated bent crystal spectrometer which successfully operated aboard Russian CORONAS-F solar mission between 2001 and 2003. It measured for the first time in a systematic way solar soft X-ray spectra in the four wavelength channels from 3.3 Å to 6.1 Å. This range includes characteristic strong lines of H- and He-like ions of K, Ar, Cl, Si, S and Al in the respective spectral channels. A distinguishing feature of RESIK is its possibility of making reliable measurements of the continuum radiation in flares. Interpretation of line and the continuum intensities observed in vicinity of respective strong lines provides diagnostics of plasma temperature and absolute abundances of K, Ar, Cl, S, Si and Al in several flares. We analyzed the observed intensities of spectral lines and the nearby continuum using the CHIANTI v5.2 atomic data package. A specific, so-called “locally isothermal” approach has been used in this respect allowing us to make not only flare-averaged abundance estimates, but also to look into a possible variability of plasma composition during the course of flares.     

A detailed FLUKA-2005 Monte-Carlo simulation for the ATIC detector

We have performed a detailed Monte-Carlo (MC) simulation for the Advanced Thin Ionization Calorimeter (ATIC) detector using the MC code FLUKA-2005 which is capable of simulating particles up to 10 PeV. The ATIC detector has completed two successful balloon flights from McMurdo, Antarctica lasting a total of more than 35 days. ATIC is designed as a multiple, long duration balloon flight, investigation of the cosmic ray spectra from below 50 GeV to near 100 TeV total energy; using a fully active Bismuth Germanate (BGO) calorimeter. It is equipped with a large mosaic of silicon detector pixels capable of charge identification, and, for particle tracking, three projective layers of x–y scintillator hodoscopes, located above, in the middle and below a 0.75 nuclear interaction length graphite target. Our simulations are part of an analysis package of both nuclear (A) and energy dependences for different nuclei interacting in the ATIC detector. The MC simulates the response of different components of the detector such as the Si-matrix, the scintillator hodoscopes and the BGO calorimeter to various nuclei. We present comparisons of the FLUKA-2005 MC calculations with GEANT calculations and with the ATIC CERN data.