Direct observation of charge state abundances of energetic He,C, O,and Fe emitted in solar flares

The ionic charge states of helium, carbon, oxygen, and iron have been determined for three solar particle enhancements by an electrostatic deflection analyzer, which is combined with a thin window proportional counter dE/dX vs. E system. The observations are obtained during the periods September 23 to 29, 1978, June 6 to 8, 1979, and September 15 to 26, 1979, with an instrument onboard the ISEE-3 spacecraft. The mean ionic charge states for He, C, and oxygen exhibit a high degree of ionization with values of Q = 2, 6, and 7.2, respectively. The charge state of iron is near 13 charge units. Variations from flare to flare and within the September 23, 1978 flare are small. The most surprising feature of the charge state measurement is the observation of a small (～10%) but finite contribution of singly ionized helium.     

Solar maximum mission experiment: Early results from the soft X-ray polychromator experiment

The X-Ray Polychromator experiment has been in operation on the SMM satellite for over three months. It is observing flares and active regions in the wavelength range 1Å to 23Å using a number of different modes. These include polychromatic imaging, high resolution line profiles, high dispersion spectra, and light curves with high time-resolution. Data are described together with some of the preliminary analysis and interpretation.     

Jikiken(EXOS-B) observation of siple transmissions

A Japanese magnetospheric satellite Jikiken (EXOS-B) was used to observe Siple transmissions and VLF emissions triggered by the Siple signals. Energetic particle fluxes were also observed at the same time. The first experiments were made during July, August and September in 1979 and the second experiments were made during December in 1979 and January in 1980. The Siple triggered emissions were observed in August. This report reviews the preliminary results.     

Fuel cell status: 1996

The technology of fuel cells is heating up. A world that, ten years ago, was unaware of the concept can now witness approximately 200 fuel cell units operating in 15 countries. Energy planners and decision makers are becoming aware that, in addition to a continual increase in installations, the reliability of early commercial units is outstanding and the cost is dropping. They have begun to ask whether fuel cells might fit into their future. While the fuel cell concept is simple, determining which type of fuel cell to consider may prove taxing. The multiplicity of fuel cells and their development programs, coupled with the amount of subject material and claims-versus-reality, may seem overwhelming. Fuel cell commercialization activities in North America are the focus of five manufacturers that are developing four types [fuel cells are typed by electrolyte: the 200°C phosphoric acid (PAFC); the 80°C proton exchange membrane (PEM); the 650°C molten carbonate (MCFC); and the 1,000°C solid oxide (SOFC) fuel cells]. Each fuel cell promises the attractive combination of fairly high efficiency and superior environmental performance compared to the presently available fossil-fueled electric generation technologies. As a result, fuel cells are particularly easy to site. There are additional advantages such as: excellent availability; electrical VAR control; quick ramp rate; remote/unattended operation; and redundancy when multiple units are installed. After earlier success in space, fuel cells are being applied to the commercial sector as on-site cogeneration units mostly fueled by natural gas. They are being considered for larger distributed generators (natural gas) and for vehicular power plants (methanol)     

Analysis of a Multiplicative Feed System for Monopulse Tracking Applications

In angle tracking antenna applications, the angle sensing boresight accuracy capabilities are important. The ability of an antenna to precisely determine the bearing angle to a point source is determined by the slope of the control function pattern at boresight. In the presence of extraneous interference, the magnitudes of the sidelobe and backlobe responses are important. Control pattern slope (angular sensitivity) is primarily a function of aperture illumination. It can be described by a current distribution in intensity and phase at every point. Once distribution is defined, lobe structure is defined by the associated transform. When more than one feed is used, the distribution will be a vector sum of the individual feed distributions. The resulting secondary pattern can be defined in terms of the amplitude distribution and the phase center locations of the contributing feeds. With a four-horn monopulse configuration, the feed phase centers are displaced from the boresight axis. Placing the phase centers on the boresight axis by rotating the feeds through 45 degrees results in a different set of intensity and phase values. A quite different secondary pattern results. The control function obtained by the subtraction of the powers from a paired set of on-axis feeds results in a lower sidelobe level than that obtained with a conventional monopulse combiner for a given feed taper.     

Waveform Detection and Classification with SAW Cepstrum Analysis

A prototype real time cepstrum analyzer incorporating surface acoustic wave (SAW), Fourier transform processors is reported. This system offers sophisticated wideband signal processing for radar, sonar, and communications applications. Practical results demonstrate its capabilities when analyzing bandwidths in excess of 10 MHz in a few microseconds with simulated pulsed RF waveforms in the presence of multipath echoes. Pulse duration, repetition interval, and binary code length are resolved and the potential to characterize unknown chirp waveforms is briefly reported.     

A Modification to Improve the Inverse Filter of Senmoto and Childers

An inverse filter, contained in a recently published paper by Senmoto and Childers, is improved by the application of a shaping function derived by Turin in an earlier paper.     

Characterization of High-Rate QPSK Channel with Adaptive Equalization

A computer simulation model capable of predicting the performance nce of a high-dta-rate end-to-end communication system with adaptive equalization is described in this paper. The model is used to characterize the behavior of NASA's proposed tracking and data relay satellite system (TDRSS), while accounting for signal distortion effects due to operational conditions and the required hardware are components necessary to fulfill mission objectives. Specifically, the performance of the TDRSS high-dta-rate lik (300 Mbps) is defined, both with and without adaptive equalization.