Spacecraft optimal rendezvous controller design using simulated annealing

A new global approach for rendezvous Linear Quadratic controller design is presented in this paper. Instead of solving the algebraic Riccati equation, a continuous simulated annealing (SA) algorithm is used to design rendezvous LQ controller. Optimization of one automatic rendezvous controller with 18 design parameters is illustrated. The results show that the SA algorithm can locate the global solution effectively and robust, besides a great number of global solutions have been obtained by the SA. The SA has demonstrated better performance than other optimization algorithms such as floating-coded Genetic Algorithm, Simplex method and Powell algorithm.     

三角翼低速动态大攻角气动特性试验研究

对后掠角分别为X=60°、70°和80°尖前缘平板三角翼模型和一个前缘后掠角为（76° 40°）的双三角翼模型在低速风洞中作大攻角俯仰摩波运动，振幅am=30°、60°和90°，缩减频率K=0.01～0.12，基于根弦长雷诺数Re=2.76×10^5～8.23×10^5。进行了六分量动态气动载荷测量，动态流动显示和70°三角翼上翼面非定常压力测量，并分别与对应的静态试验结果比较。分析了运动参数包括缩减频率、振幅和Re数、后掠角对气流动态迟滞特性的影响。     

硅基内衬喷管扩张段烧蚀和温度场的耦合计算方法

本文叙述固体火箭喷管扩张段硅基内衬烧蚀和温度场的耦合计算方法.烧蚀采用非定常的液体层烧蚀模型;温度场计算采用圆柱坐标系下的一维径向瞬态导热模型,考虑材料在高温下形成的炭化层和热解层,而由烧蚀产生的边界移动问题用坐标变换的方法处理.利用烧蚀和导热计算方程组中二者的结合部,通过充分耦合,获得了更准确的预示计算结果.     

受均匀内压作用的偏置孔边径向裂纹的应力强度因子的一种求解方法

本文利用一种新的混合法——光弹性实验与权函数解法相结合求解了孔壁受均匀内压作用偏置圆孔边径向裂纹的应力强度因子,该方法具有简单、经济、精度高等优点,对分析复杂应力场中圆孔边穿透裂纹问题,该方法同样适用,且优点更为突出.     

风洞中复杂流场三维速度LDV测量

本文将一台TSI 9100-7型两分量激光测速仪改进为可测三个速度分量的LDV系统,并用于测量风洞中椭球体模型、双三角翼模型大迎角下的复杂流场三维速度分量。流场横截面内的速度矢量分布与相同实验条件下的流态显示结果相符合,并对涡流场加以分析。     

石魄水魂天台山

石与水原是无情物．但因为有它们．天台山竟又如此的风情万种。摩崖巨石赋予了天台山阳刚的壮美．而流泉飞瀑则给予了它女子般的柔美。     

能谱变硬后的X射线对Ly12铝破坏效应的研究

用数值模拟方法讨论了X射线的能谱向短波方向变化后,对Ly12铝破坏效应的影响,对所得结果进行了分析和解释。     

利用双目标优化寻求颤振抑制控制律

本文对一个三角机翼/外挂系统的颤振主动抑制进行了系统的研究。在理论上,对如何应用现代控制理论设计优化控制律进行了探讨;对非定常气动力拟合的Pade矩阵近似作了改进;提出了用理想极点和二次型性能指标进行双目标优化来确定加权矩阵的思想;在实现上,用状态观测器和单秩法极点配置两种方法设计了输出反馈控制律。风洞实验结果表明:用本文的方法所综合的控制律是合适有效的,成功地使机翼/外挂系统的颤振速度提高了15.7％,与理论计算结果吻合良好。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

Matching suitable feature construction for SAR images based on evolutionary synthesis strategy

In the paper,a set of algorithms to construct synthetic aperture radar（SAR）matching suitable features are frstly proposed based on the evolutionary synthesis strategy.During the process,on the one hand,the indexes of primary matching suitable features（PMSFs）are designed based on the characteristics of image texture,SAR imaging and SAR matching algorithm,which is a process involving expertise;on the other hand,by designing a synthesized operation expression tree based on PMSFs,a much more flexible expression form of synthesized features is built,which greatly expands the construction space.Then,the genetic algorithm-based optimized searching process is employed to search the synthesized matching suitable feature（SMSF）with the highest effciency,largely improving the optimized searching effciency.In addition,the experimental results of the airborne synthetic aperture radar ortho-images of C-band and P-band show that the SMSFs gained via the algorithms can reflect the matching suitability of SAR images accurately and the matching probabilities of selected matching suitable areas of ortho-images could reach 99±0.5%.