微纳聚合体卫星的对称式重构规划算法

为解决微纳聚合体卫星变构过程中,聚合体各部分之间的动力学耦合导致的卫星整体姿态翻转或紊乱,提出了一种对称式变构规划算法。首先建立了铰链约束下的漂浮基多刚体系统动力学模型,研究了重构过程中各运动模块对本体姿态的影响,提出当每两个运动模块位置与转动方向满足对称性条件时,两者对本体姿态的影响可在一定程度上相互抵消。基于上述理论,在A*算法中引入最优分配度量和对称性判定,设计了并行对称重构规划算法。仿真结果表明,该规划算法可实现重构过程中多模块并行、对称运动,重构过程总步数较少,运动模块对本体姿态的影响小。     

先进的短距起飞垂直降落(ASTOVL)升力风扇飞机的动态逆控制

研究了推力矢量喷管、升力风扇以及气动舵面共同作用下 ASTOVL升力风扇飞机的飞控问题 ,采用非线性动态逆理论进行控制系统的设计。针对 ASTOVL升力风扇飞机的俯仰控制设计了动态逆控制律 ,并将所设计的控制律进行了仿真。结果表明 ,该方法能够满足控制系统性能的要求 ,具有工程应用前景。     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。     

DELMIA在某民机前货舱门装配仿真中的应用

在现代自动化作业系统中,操作和管理的大多是一些复杂系统和各种数字化设备,这对操作人员观察周围环境和完成精准操作任务的要求很高。通过人机工程技术分析,可以对这些复杂、易错的任务逐个分析,合理分配注意力、安排操作顺序,既减轻操作人员的工作负荷又避免出错,切实提高人机工效。     

A straw-soil co-composting and evaluation for plant substrate in BLSS

Material closure is important for the establishment of Bioregenerative Life Support System, and many studies have focused on transforming candidate plant residues into plant culture medium. For the limitations of using wheat straw compost as substrate for plant cultivation, a straw-soil co-composting technique was studied. The changes of pH, C/N value, germination index, cellulose, lignin and so on were monitored during the co-composting process. The maturity was evaluated by the C/N value and the germination index. The result showed that after 45 days’ fermentation, the straw-soil final co-compost with inoculation (T1) became mature, while the co-compost without inoculation (T0) was not mature. In the plant culture test, the T1 substrate could satisfy the needs for lettuce’s growth, and the edible biomass yield of lettuce averaged 74.42 g pot⁻¹ at harvest. But the lettuces in T0 substrate showed stress symptoms and have not completed the growth cycle. Moreover, the results of nitrogen (N) transformation experiment showed that about 10.0% and 3.1% N were lost during the T1 co-composting and plant cultivation, respectively, 23.5% N was absorbed by lettuce, and 63.4% N remained in the T1 substrate after cultivation.     

运用GPS空中校正飞机无线电罗差误差分析

针对某些特种飞机无线电罗差无法沿用传统校正方法在地面进行校正的状况 ,首次提出了运用 GPS接收机在空中校正飞机无线电罗差的方法。本文对影响该校正方法校正精度的各项误差因素进行了分析。     

Dynamic characteristics analysis of deployable space structures considering joint clearance

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.     

专用瞄准设备自动检定系统

介绍了专用瞄准设备自动检定系统的系统配置、工作原理及软件设计，并对系统的测量不确定度进行了分析和评定。     

烟丝配料单片机控制系统

本文介绍了配料生产过程中单片机控制系统的硬件结构及软件流程。由于硬件和软件设计上都采用了模块化的结构，所以便于安装调试，整个系统可推广到诸如水泥、矿产、食品加工等生产中。     

New Horizons Mission Design

In the first mission to Pluto, the New Horizons spacecraft was launched on January 19, 2006, and flew by Jupiter on February 28, 2007, gaining a significant speed boost from Jupiter’s gravity assist. After a 9.5-year journey, the spacecraft will encounter Pluto on July 14, 2015, followed by an extended mission to the Kuiper Belt objects for the first time. The mission design for New Horizons went through more than five years of numerous revisions and updates, as various mission scenarios regarding routes to Pluto and launch opportunities were investigated in order to meet the New Horizons mission’s objectives, requirements, and goals. Great efforts have been made to optimize the mission design under various constraints in each of the key aspects, including launch window, interplanetary trajectory, Jupiter gravity-assist flyby, Pluto–Charon encounter with science measurement requirements, and extended mission to the Kuiper Belt and beyond. Favorable encounter geometry, flyby trajectory, and arrival time for the Pluto–Charon encounter were found in the baseline design to enable all of the desired science measurements for the mission. The New Horizons mission trajectory was designed as a ballistic flight from Earth to Pluto, and all energy and the associated orbit state required for arriving at Pluto at the desired time and encounter geometry were computed and specified in the launch targets. The spacecraft’s flight thus far has been extremely efficient, with the actual trajectory error correction ΔV being much less than the budgeted amount.