基于A320飞机横航向控制律架构的LQ设计

空客A320飞机横航向控制律采用特征结构配置方法计算闭环增益,实现了期望特征值的配置及横航向关键参数之间的解耦。基于A320横航向控制律架构,提出使用线性二次型(Linear Quadratic,简称LQ)方法,对闭环增益进行重新设计。首先根据期望的特征值引入关键参数的频域整形环节,而后通过调整二次型性能指标加权矩阵实现期望特征值的逼近及关键参数之间的解耦,并求得闭环反馈增益,最后在特征结构、稳定裕度和横航向解耦效果方面与空客设计结果作了对比分析。仿真结果表明,LQ设计可获得与特征结构配置设计相近的结果,即得到接近期望值的特征值,并实现关键变量的解耦,同时保证了闭环稳定裕度。     

Ⅲ—Ⅴ族四元固溶体中原子近邻及次近邻的键长表达方式

基于ＦＤＵＣ模型和Ⅲ－Ⅴ族元素共价半径不变的假设，本文出了Ⅲ－Ⅴ族固溶体中原子近邻和次近邻的键长表达式。这套键长表达式除依赖于四个Ⅲ－Ⅴ族元素的含量（ｘ，ｙ）外，只与四个纯化合物的晶胞参数或这四个Ⅲ－Ⅴ族元素的共价半径有关。而且也含盖了相应的伪二元固溶体的情况。本文还对其他的理论模型作了进一步的比较和讨论。     

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).     

判断力权值的确定方法及AHP中群组判断矩阵的形成

在ＡＨＰ模型中，请一组专家对某一属性进行评价，根据专家的判断能力，给出判断力权值，再通过适当的数学处理方法，可得最优判断矩阵，这是ＡＨＰ中构造判断矩阵的一种新方法。     

弹翼对旋成体底部流动的影响

本文利用压强测量及纹影观测技术研究弹翼对旋成体底部流动及底阻的影响，研究对象包括有无收缩船尾的两种后体，并同时测量了模型的底面和侧面压强分布，通过实验观测结果和理论分析，得到较细致的弹翼干扰结果，有助于进一步认识底部注以动特性及上游干扰，对飞行器设计有实用意义。     

重复热处理工艺对30CrMnSiA钢疲劳性能的影响

本文介绍了30CrMnSiA钢的九种不同的重复热处理工艺,结果显示B种热处理工艺能使30CrMnSiA钢具有最佳的抗疲劳性能并证明不同的重复热处理状态对钢的疲劳性能有影响.     

条形码在机房管理系统中的应用

文章介绍了基于条形码技术的机房管理系统的网络构建及其功能模块设计，以及条形码在系统设计中的技术实现。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

基于DSM的型号研制项目过程建模

通过分析型号研制项目活动之间的关系,建立了基于DSM的型号研制项目过程结构化模型,给出了具体实现项目过程的DSM方法,包括活动分解、耦合活动集的识别和耦合活动集的解耦方法,实现了型号研制项目过程的优化重组,最后,通过一个实例说明了该建模方法的实用性和有效性.     

PLM支持下的数字化制造

越来越多的制造企业从长远发展的战略考虑,精心规划和积极构建企业信息系统集成框架,为深化企业信息共享.推动企业创新打基础.传统的制造行业,特别是装备制造业,在PLM战略支持下的数字化制造平台,将给企业创新添加新的活力.