激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

吸热碳氢燃料热沉测量实验装置的设计与性能测试

为了测定吸热碳氢燃料在不同温度条件下的总吸热量(热沉),以便于对吸热碳氢燃料进行筛选,研制了一套适合于高温下热沉测量的实验装置。该装置主要由进样计量、载气输送、加热控温、反应量热和产物分析五部分组成。对反应管轴向温度分布进行了测定,实验装置的工作温度范围在500℃-900℃,各温度下恒温区域长达440 mm,恒温区内温度梯度不大于3℃;利用电能标定的方法测定了装置的量热常数,并用纯物质(N2)作为样品对装置的准确度进行了校准,求解仪器量热常数的工作曲线的线性相关系数在0.999 7以上,氮气热沉测定值与理论值基本吻合,表明该装置测定结果可靠、测量准确度高,装置的设计符合T ian’s方程,可用于吸热碳氢燃料热沉的实验测定,为吸热碳氢燃料的研究提供了较可靠的热化学数据。     

76°/40°双三角翼前缘涡破裂及其控制实验研究

流动显示结果表明,喷流能有效地推迟双三角翼前缘涡的破裂,且随着攻角的增大,前缘涡破裂位置逐渐推后,喷流极大地改善了大攻角情况下前缘涡的非对称破裂特性,能有效地克服可能出现的机翼的"摇滚"现象.另外,后缘喷流可以减弱乃至消除前缘涡混掺现象的发生,进而有利于飞行器的操纵.     

高速电路PCB板中电磁干扰的研究

结合设计印制电路板的实际经验 ,首先介绍了电磁兼容和电磁干扰 ,其次分析了高速电路PCB设计中产生电磁干扰的主要原因 ,最后提出了防止和抑制电磁干扰的方法以及提高电磁兼容性的具体措施。     

强场脉冲充磁退磁装置

介绍了充电电容器通过磁路瞬时放电产生强磁场的原理 ,选择回路参数可实现高矫顽力类永磁材料的充磁或者退磁 ,介绍了所研制的脉冲充磁退磁装置的性能。     

NIM4#铯冷原子喷泉钟新一代时间频率基准

回顾了NIM4 #钟实现 5 μK冷原子云 ,74cm原子喷泉和 0 95Hz线宽Ramsey跃迁实验 ,报道了 9 19GHz微波锁定到铯原子秒定义跃迁 ,频率稳定性达到 (5 - 7)× 10 -15(15 0 0 0s)。目前我们正在进行不确定度评估 ,可望不确定度进入 10 -15量级 ,建立我国新一代时间频率基准装置。     

基于PXI总线的瞄准电子设备虚拟计量检定系统

基于PXI总线和虚拟仪器的设计思想 ,提出了一种新型的瞄准电子设备虚拟计量检定系统的设计方案 ,对系统的硬件组成、检测原理和系统软件进行了论述 ,并对系统的校准问题进行了分析。     

通用电学参数自动校准系统接口研制

为了提高日常检定工作的工作效率,介绍一种基于LabVIEW平台下,以为接口的电学参数自动检定系统的组成、仪器控制方式及系统的特点。