Pro／E二次开发技术在卫星结构设计中的应用

为解决卫星协同设计过程中总体、结构信息同步滞后问题,基于Pro／E软件进行二次开发,实现对总体与结构接口文件的自动解析;利用解析出来的接口数据,在模型上进行表阵列的自动创建,使总体设计模型的变更能够在结构设计模型中及时得到反映,从而实现“总体一结构”设计结果的快速同步。文章中开发的软件工具,在多颗卫星的研制过程中得到了应用。     

计算机仿真椭圆钣金件拉深成形技术研究

应用PAMSTAMP数值模拟仿真功能,研究了不同压边力及分步成形对椭圆钣金件拉深成形的影响,解决了拉深成形过程中的缩颈及开裂缺陷,通过计算机仿真,获得了最佳的工艺参数和工艺流程。     

掠海飞行器主动触水撞水力分析

随着掠海飞行器飞行高度的不断降低,海浪和海况条件已成为制约其飞行高度的重要因素,严重时可引起飞行器姿态的倾覆。基于小升角楔形体入水模型和解析法,研究了掠海飞行器主动击水时所产生的撞水力变化特点,得到了击水滑板的外形参数和入水姿态角的选取准则,即入水弹道倾角-2°～0°,滑板等效斜升角β1≥10°,俯仰角变化范围0°～5°、滚动角变化范围-30°～30°,保证掠海飞行器在主动击水条件下产生的撞水力小于最大限定值20 gn的要求,实现了飞行器在恶劣海况下的掠海飞行。采用有限元法进行的三维仿真结果表明,此解析法所计算结果具有较高的可信度。     

基于分散化信息滤波的移动机器人定位

给出分散化信息滤波的最优性证明和保证最优性的条件 ,讨论了分散化信息滤波在故障检测和多传感器融合中的优势 ,提出一种在不影响分散化优势的情况下可以减小通讯量的滤波器结构。最后的仿真例子说明该方法在移动机器人定位应用中的有效性。     

伪码调相与PAM复合测距系统研究

介绍了PAM伪随机码的构成原理,推导了PAM伪随机码的自相关函数和功率谱密度。结合图形分析了它们的性质特点。设计了伪码调相与PAM复合测距系统,并分析了在加性高斯白噪声信道中的各个阶段的信号形式。研究了复合测距系统的性能,详细推导了复合测距系统的信噪比增益。结果表明,与单纯的伪码测距系统相比,复合测距系统有更强的抗干扰性能和测距能力。     

按降低轨迹灵敏度综合最优设计飞行控制系统

本文提出了一个按降低轨迹灵敏度综合最优设计飞行控制系统的方法。它能使系统具有满意的动态品质,同时对系统参数的变化及非线性产生的影响具有较强的鲁棒性。该设计方法具有通用性和程序化,系统实现简单。     

固体火箭发动机／导弹一体化设计

以某一两级固体地—空导弹作为算例,研究了固体火箭发动机/导弹一体化设计问题。研究以导弹起飞质量最轻和可用过载最大为目标建立了目标函数,利用优化理论完成了7个设计变量的优化设计。优化结果表明,所建立的数学模型是正确的。     

GPS based onboard and onground orbit operations for small satellites

In extension to common applications such as groundtrack displays and antenna steering, the SGP4 orbit model is proposed for operational orbit determination in small satellite missions. SGP4 is an analytical orbit model for Low-Earth orbiting satellites that is widely used for the propagation of NORAD twoline elements. Twoline elements may hence be generated completely independent of NORAD. Their use as exclusive source of orbital information simplifies the operations concept and reduces mission costs through the extensive use of existing low-cost mission support software. Due to small computer resource requirements of 8–10kByte, the SGP4 model may also be applied for onboard orbit computations making use of e.g. a 80186 processor, thus ensuring full compatibility of ground-based and onboard operations. The proposed approach is particularly suited in combination with a space-borne GPS receiver, were the C/A-code navigation solutions are treated as measurements that are adjusted in a least-squares sense using the SGP4 model. As consequence, inherent drawbacks of the pure navigation solutions such as data gaps and scatter as well as limited velocity accuracy are avoided, while the operational navigation activities are kept at a minimum. The feasibility of the concept is illustrated based on real GPS navigation data from the TOPEX/Poseidon and the MIR space station with an inherent data quality of 50–100 m. It is shown that 3 hours of data within a 4 day period are sufficient to keep the position error within 4 km, that is considered sufficient for most applications.     

Advanced detectors and instruments for small satellites

This paper presents some approaches to the development of advanced detectors and to miniaturized instrument design which are pursued in the Institute of Space Sensor Technology of DLR (the German Aerospace Research Establishment). The instrument design approach is demonstrated for a low-weight (3 kg) dual camera system with narrow-angle in-track stereo and wide-angle multispectral features. Each camera has its own signal processor and 0,5 G Bit mass memory. The activities for advanced detector development are concentrated on two different kinds of detectors and instrumentations: infrared detector arrays and instruments at wavelengths out to about 240 μm, and superheterodyne receivers in the submillimeter and far-infrared spectral ranges.     

火烧炉内气相燃烧过程的三维数值模拟

本文对某工业火烧炉内的三维湍流气相燃烧场特性进行了数值模拟,湍流模型采用可实现k-ε双方程模型,湍流燃烧采用有限速率/涡耗散模型,辐射换热采用P1模型,数值方法采用SIMPLE算法,实现了炉内火烧试验的数值再现,特别考察了入口压力、燃料/空气比、多烧嘴不同组合工况等因素对炉内温度场和流场的影响,并对该火烧炉的运行提出了一些合理化建议,为其实际运行提供了有益的参考。