星地动态双向时间同步与测距算法

针对卫星运动对星地距离和钟差测量的不利影响,提出一种基于最小二乘拟合的星地动态双向时间同步与测距算法。在建立星地可视模型基础上,仿真了MEO运动卫星与地面时间同步站之间星地距离的变化规律,分析了卫星运动对星地双向时间同步与测距的主要不利影响。该算法首先利用星地双向时间同步数据分别生成星地距离和钟差拟合多项式,然后联合求解出运动卫星误差最小的星地距离与钟差。实验结果表明了该算法的合理性和科学性,在包含仿真误差的条件下,其时间同步精度优于3ns,测距精度优于3m。将其应用到各种空天应用系统的星地时间同步与测距中,可以消除卫星运动对双向时间同步与测距的不利影响,提高时间同步与测距精度。     

Analysis on Potential Conflict Frequency of Intersected Air Routes in Terminal Airspace Design

In order to obtain accurate conflict risks in terminal airspace design, the concept and calculation model of potential conflict frequency for intersected routes are proposed. Conflict frequency is represented by the product of horizontal conflict frequency and vertical conflict probability. The horizontal conflict frequency is derived from the probability density distribution of conflicts in a period of time. Based on the recorded radar trajectory data, the concept and model of ROUTE distance are proposed, and the probability density function of aircraft height at a specified ROUTE distance is deduced by kernel density estimation. Furthermore, vertical conflict probability and its horizontal distribution are achieved. Examples of three intersected arrival and departure route design schemes are studied. Compared with scheme 1, the conflict frequency values of the other two improved schemes decrease to 53 % and 24%, respectively. The results show that the model can quantify potential conflict frequency of intersec ted routes.     

四轴飞行器姿态监控系统设计

设计了一套四轴飞行器上位机监控系统。针对准确掌握四轴飞行器的实时姿态、位置等信息和对四轴飞行器进行精准控制两大核心问题,开发了由上位机实现四轴飞行器姿态数据采集、通信及控制等功能的监控系统。监控系统良好的功能设计和友好的人机界面使得用户能够准确掌握飞行器的飞行信息,从而能够更精准地控制四轴飞行器飞行姿态。实验验证,监控系统简单实用,性能稳定,精度高,使整个飞行系统抗干扰能力强,鲁棒性、稳定性好。     

气体介质对排气式气囊缓冲特性影响研究

中国新一代载人飞船试验船研制过程中开发了一套组合式缓冲气囊.以新飞船返回舱为研究对象,通过流体力学和热力学理论推导,建立了含有内囊的组合式气囊缓冲过程动力学模型,并通过MSC-Dytran对其有效性进行了验证.之后通过仿真计算,分析了影响气囊缓冲特性的两项气体固有参数——气体自由度与摩尔质量——对气囊缓冲过程的影响.研...     

热力学非平衡状态下DSMC绝热壁边界的抽样方法

从直接模拟蒙特卡罗仿真DSMC方法的实现途径出发,经过分析推导,给出了一种在考虑分子转动能、振动能等热力学非平衡状态下统计求解绝热壁温的DSMC抽样方法。然后采用锥体外形的算例验证,分析了该方法在实现绝热壁条件时的统计误差。计算结果表明,此种方法能够有效地实现DSMC方法壁面处的绝热壁条件,随着采样步数的增加,其边界条件实现时的统计误差不断降低,该方法收敛后的统计误差可降至0.5%,能够满足工程要求。     

Modeling and Optimal Design of 3 Degrees of Freedom Helmholtz Resonator in Hydraulic System

Three degrees of freedom (3-DOF) Helmholtz resonator which consists of three cylindrical necks and cavities connected in series (neck-cavity-neck-cavity-neck-cavity) is suitable to reduce flow pulsation in hydraulic system. A novel lumped parameter model (LPM) of 3-DOF Helmholtz resonator in hydraulic system is developed which considers the viscous friction loss of hydraulic fluid in the necks. Applying the Newton’s second law of motion to the equivalent mechanical model of the resonator, closed-form expression of transmission loss and resonance frequency is presented. Based on the LPM, an optimal design method which employs rotate vector optimization method (RVOM) is proposed. The purpose of the optimal design is to search the resonator’s unknown parameters so that its resonance frequencies can coincide with the pump-induced flow pulsation harmonics respectively. The optimal design method is realized to design 3-DOF Helmholtz resonator for a certain type of aviation piston pump hydraulic system. The optimization result shows the feasibility of this method, and the simulation under optimum parameters reveals that the LPM can get the same precision as transfer matrix method (TMM).     

推力室涡流冷却技术试验研究

涡流冷却是一种新型液体火箭发动机推力室冷却技术。在理论分析和数值计算的基础上,设计了采用气氢/气氧作为推进剂的试验用涡流冷却推力室,进行了多次冷流试验和点火试验。在不采用其它冷却措施的情况下,完成了工作时间为20s的点火试验。试验结果表明,涡流冷却推力室工作稳定,气氧形成了有效的冷涡流,圆筒段外壁面温升为5K,部分气氧形成的气膜也对喷管形成了有效的保护。     

放射性勘查计量的发展及关键技术

放射性勘查计量从1958年开始简易点源标定,到1978年开始建立与天然辐射场2盯空间辐射近似的实物模型标准,经历了约20年的仪器检查性测试计量和30余年的统一标准计量的发展历程,先后共研建了12项计量标准和1项模拟试验装置,其中4项标准已获得了国家专项计量授权。从中掌握了多项关键技术,形成了独特的放射性勘查计量保障体系,计量保障涵盖了放射性区域调查、局部详查、钻探等整个勘查过程,在为国家放射性勘查提供计量保障的同时,还为核应急、核设施退役等伽玛辐射环境航空监测提供了计量保障。     

MEMS陀螺零偏温度补偿模型研究

针对MEMS陀螺工作易受温度变化影响、角速度测量输出误差大、预热时间长的问题,通过大量实验数据分析、总结规律,建立了零偏温度补偿模型,并结合最小二乘法利用多元线性回归技术对模型参数进行了辨识。对比零偏温度补偿前后的试验结果表明,经过补偿后的MEMS陀螺不但测量精度得到提高,其工程应用稳定性也得到增强。     

聚酰亚胺/无机氧化物复合薄膜的制备与耐原子氧性能

分别以锆酸四丁酯、钛酸四丁酯和正硅酸乙酯为氧化物前驱体,利用溶胶凝胶法制备了一系列聚酰亚胺/无机氧化物复合薄膜,在原子氧地面模拟设备中进行了原子氧暴露实验,原子氧累计通量约为3.1×10²⁰ atom/cm².分别考察了无机氧化物种类和含量对复合薄膜力学性能和耐原子氧性能的影响.结果表明,无机氧化物在聚酰亚胺基体中的分散形态对其力学性能影响很大;原子氧暴露后,聚酰亚胺薄膜表面分别形成了富锆、富钛和富硅的保护层,质量损失率减小,耐原子氧性能明显提高.