Effect of fluid and salt supplements in preventing the development of "osteopenia" in hypokinetic rats

It has been suggested that a daily intake of fluid and salt supplements may be used to prevent bone demineralization in human subjects after prolonged exposure to hypokinesia (diminished muscular activity). Thus, the objective of this investigation was to evaluate the effect of fluid and salt supplementation in the prevention of development of osteoporosis in 64 Wistar rats with an initial body weight of 339-345 g, after exposure to 90 days of hypokinesia. They divided into 4 equal groups: the first group of rats placed under ordinary vivarium conditions and served as vivarium control; the second group were also placed under ordinary vivarium conditions but received daily fluid and salt supplements; the third group were subjected to pure hypokinesia, i.e. without the use of any preventive measures; and the fourth group were submitted to hypokinesia and received daily fluid and salt supplements. For the simulation of the hypokinetic effect the experimental group of rats were kept in small, individual, wooden cages. Through the experimental period the second and fourth group of rats received 8 ml/100 g body wt water and 5 ml 100 g body wt NaCl daily. By the end of the experimental period the animals were decapitated and the spongy matter of tibia and vertebrae of the rats were examined for changes referable to osteoporosis. It was found that the daily intake of fluid and salt supplements caused an increase in the volume density of primary spongiosa of bones. It was concluded that a daily intake of fluid and salt supplements may be used to prevent the development of osteoporosis in rats subjected to prolonged motor activity restriction.     

Review and analysis of the register of space objects

Parties to the Registration Convention are committed to providing the United Nations with certain information about objects they launch into space. This report describes the categories of information required, outlines the inadequacies of the present Register and suggests modifications.     

曲面和任意取向表面表面摩阻油膜测量法的进展

本文叙述曲面和任意取向表面表面摩阻测量方法的进一步的发展。介绍用漫射照明获取薄油膜等厚度干涉条纹谱的理论根据和实验结果。讨论了通过油流显示图像的分析,自动探测表面流线方位的可能性。所得结论表明油膜法也能应用于复杂的三维流动。     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

High velocity impact characterization of Al alloys for oblique impacts

This paper describes the experimental and computational analyses of a high velocity aluminum projectile impact on an Al6061-T6 spacecraft inner wall at different oblique angles. Al2017-T4 spherical projectiles of 5.56 mm in diameter and 0.25 g in weight were chosen within the velocity range of 1000±200 m/s due to the limitation of the light gas gun. The energy absorbed was calculated by measuring the velocities before and after impact on the inner wall. The energy absorbed by the wall and the remaining energy carried by the projectile helped to estimate the severity of further damage to inner components. Afterwards, validation was done by using the commercially available software LS-DYNA with a dedicated SPH. On average, a 10% energy absorption difference between experimentation and simulation was found. By using C-SCAN, the damage area proportion of the total inner wall to impact penetration hole area was found to be on average 6%, 26% and 53% greater than the projectile cross sectional area for the oblique angle impacts of 30°, 45°, and 60°, respectively. These findings helped to understand the relationship between the oblique impact event and the damage area on a spacecraft inner wall along with space debris cloud propagation and comparison with experimental results using LS-DYNA.     

Erratum to: Determination of the Probability of Collision of Near-Earth Space Objects Taking into Account Form and Orientation

Cosmic Research - An Erratum to this paper has been published: https://doi.org/10.1134/S0010952521120030     

Ares I–X Flight Test Vehicle similitude to the Ares I Crew Launch Vehicle

The Ares I–X Flight Test Vehicle is the first in a series of flight test vehicles that will take the Ares I Crew Launch Vehicle design from development to operational capability. Ares I–X is scheduled for a 2009 flight date, early enough in the Ares I design and development process so that data obtained from the flight can impact the design of Ares I before its Critical Design Review. Decisions on Ares I–X scope, flight test objectives, and FTV fidelity were made prior to the Ares I systems requirements being baselined. This was necessary in order to achieve a development flight test to impact the Ares I design. Differences between the Ares I–X and the Ares I configurations are artifacts of formulating this experimental project at an early stage and the natural maturation of the Ares I design process. This paper describes the similarities and differences between the Ares I–X Flight Test Vehicle and the Ares I Crew Launch Vehicle. Areas of comparison include the outer mold line geometry, aerosciences, trajectory, structural modes, flight control architecture, separation sequence, and relevant element differences. Most of the outer mold line differences present between Ares I and Ares I–X are minor and will not have a significant effect on overall vehicle performance. The most significant impacts are related to the geometric differences in Orion Crew Exploration Vehicle at the forward end of the stack. These physical differences will cause differences in the flow physics in these areas. Even with these differences, the Ares I–X flight test is poised to meet all five primary objectives and six secondary objectives. Knowledge of what the Ares I–X flight test will provide in similitude to Ares I—as well as what the test will not provide—is important in the continued execution of the Ares I–X mission leading to its flight and the continued design and development of Ares I.     

Physical Calibrations of the FREND Instrument Installed Onboard TGO Martian Orbiter

Cosmic Research - The article presents results of ground calibrations of the FREND neutron telescope installed onboard the TGO spacecraft of the Russian-European ExoMars project. The main goal of...