Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

On the dynamics of a novel manipulator with slewing and deployable links

Using a novel space platform-based manipulator with slewing and deployable links, the paper addresses two issues of considerable importance: (a) How important is it to model flexibility of the system? (b) How many modes are needed to adequately represent the elastic character? Results suggest that the fundamental mode is able to capture physics of the response quite accurately. Due to its massive character, the platform dynamics is virtually unaffected, even by severe maneuvers of the manipulator. Hence, treating the platform as rigid would save the computational cost without affecting the accuracy. Although the link flexibility does affect the manipulator's tip vibration, the joint and platform vibrations remain negligible. The revolute joint flexibility appears to be an important parameter affecting both the joint as well as tip responses. The information should prove useful in the design of this new class of manipulators.     

Raman imagery: a new approach to assess the geochemical maturity and biogenicity of permineralized precambrian fossils

Laser-Raman imagery is a non-intrusive, non-destructive analytical technique, recently introduced to Precambrian paleobiology, that can be used to demonstrate a one-to-one spatial correlation between the optically discernible morphology and kerogenous composition of permineralized fossil microorganisms. Made possible by the submicron-scale resolution of the technique and its high sensitivity to the Raman signal of carbonaceous matter, such analyses can be used to determine the chemical-structural characteristics of organic-walled microfossils and associated sapropelic carbonaceous matter in acid-resistant residues and petrographic thin sections. Here we use this technique to analyze kerogenous microscopic fossils and associated carbonaceous sapropel permineralized in 22 unmetamorphosed or little-metamorphosed fine-grained chert units ranging from approximately 400 to approximately 2,100 Ma old. The lineshapes of the Raman spectra acquired vary systematically with five indices of organic geochemical maturation: (1) the mineral-based metamorphic grade of the fossil-bearing units; (2) the fidelity of preservation of the fossils studied; (3) the color of the organic matter analyzed; and both the (4) H/C and (5) N/C ratios measured in particulate kerogens isolated from bulk samples of the fossil-bearing cherts. Deconvolution of relevant spectra shows that those of relatively well-preserved permineralized kerogens analyzed in situ exhibit a distinctive set of Raman bands that are identifiable also in hydrated organic-walled microfossils and particulate carbonaceous matter freed from the cherts by acid maceration. These distinctive Raman bands, however, become indeterminate upon dehydration of such specimens. To compare quantitatively the variations observed among the spectra measured, we introduce the Raman Index of Preservation, an approximate measure of the geochemical maturity of the kerogens studied that is consistent both with the five indices of organic geochemical alteration and with spectra acquired from fossils experimentally heated under controlled laboratory conditions. The results reported provide new insight into the chemical-structural characteristics of ancient carbonaceous matter, the physicochemical changes that accompany organic geochemical maturation, and a new criterion to be added to the suite of evidence by which to evaluate the origin of minute fossil-like objects of possible but uncertain biogenicity.     

The European Astronaut Centre prepares for International Space Station operations

The European Space Agency (ESA) contribution to the International Space Station (ISS) goes much beyond the delivery of hardware like the Columbus Laboratory, its payloads and the Automated Transfer Vehicles. ESA Astronauts will be members of the ISS crew. ESA, according to its commitments as ISS international partner, will be responsible to provide training on its elements and payloads to all ISS crewmembers and medical support for ESA astronauts. The European Astronaut Centre (EAC) in Cologne has developed over more than a decade into the centre of expertise for manned space activities within ESA by contributing to a number of important co-operative spaceflight missions. This role will be significantly extended for ISS manned operations. Apart from its support to ESA astronauts and their onboard operations, EAC will have a key role in training all ISS astronauts on ESA elements and payloads. The medical support of ISS crew, in particular of ESA astronauts has already started. This paper provides an overview on status and further plans in building up this homebase function for ESA astronauts and on the preparation towards Training Readiness for ISS crew training at EAC, Cologne. Copyright 2001 by the European Space Agency. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. Released to IAF/IAA/AIAA to publish in all forms.     

Single-Axis Solar Orientation of a Satellite of the Earth

The possibility of using the mode of single-axis solar orientation is considered for a satellite placed into a nearly circular orbit with an altitude of 900 km and bearing a solar sail. The satellite (together with the sail) has an axisymmetric structure, its symmetry axis being the principal central axis of the maximum moment of inertia. The center of the sail pressure lies on this axis and is displaced with respect to the satellite's center of mass. The symmetry axis of the satellite is set to the Sun so that its center of mass would be located between the Sun and the pressure center and would rotate around this axis with an angular velocity of a few degrees per second. The satellite's axis of symmetry makes a slow precession under the action of the gravitational moment and the moment of light pressure forces. Though the maximum magnitudes of these moments are comparable, the moment of the light pressure forces dominates and controls the precession in such a way that the symmetry axis orientation to the Sun remains unchanged.     

Dynamics and control of variable-geometry truss structures

Variable-geometry truss structures are likely to be used extensively in the future for in-orbit space construction. This paper considers dynamics formulation and vibration control of such structures. The truss system is modelled as a collection of sub-structures consisting of truss booms, prismatic actuator elements, and in some cases a manipulator at the end. Each truss boom is treated as a separate ‘link’ and its flexibility is modelled using the finite element method. Equations of motion for individual sub-structures are obtained which are then assembled. The non-working constraint forces are eliminated to obtain the equations governing the constrained dynamics of the entire system. For vibration control, the singular perturbation method is employed to construct two reduced-order models, for quasi-static motion and for modal co-ordinates, respectively. Computed torque with PD control is applied to maintain the quasi-static motion, while an optimal LQR method is used for vibration control. Typical simulation results are presented for the planar case.     

Electrostatic Instability and Plasma Irregularities in the Topside Ionosphere above the South-Atlantic Geomagnetic Anomaly

The data of measuring the plasma density in the topside ionosphere for the South-Atlantic geomagnetic anomaly region are presented. It is shown that irregular plasma structures with a wide spectrum of irregularity scale (including large-scale structures with a dimension of order of some hundred kilometers) can be generated in the fields of electrostatic turbulence in inhomogeneous plasma.     

Convective Motions in Near-Critical Fluids under Real Zero-Gravity Conditions

The results of processing and interpreting the data of joint Russian–French experiments for studying the heat and mass transfer in near-critical fluids are presented. The experiments were carried out with the ALICE-1 instrument during an orbital flight of the Mirstation from September 30 to October 2, 1995 [1]. For such fluids with a point-like source of heat, when they are placed in the field of uncontrolled inertial accelerations of the spacecraft, the influence of thermovibrational and thermogravitational mechanisms of convection on the propagation of the region of optical irregularity is investigated. It is shown that, near the thermodynamic critical point, local heating of the medium leads to generation of either intense thermogravitational convection or averaged vibroconvective flow, depending on the frequency of variations of the microaccelerations. The structure and characteristics of discovered motions are studied. The results of numerical simulations are presented that confirm the conclusion about a possibility of generation of an averaged convective flow of a vibrational type by the high-frequency component of microaccelerations.     

Thermal resistance in satellite mounting plates due to conductive heat transfer

The thermal resistance due to conductive heat transfer between two heat generating boxes mounted symmetrically on a thin mounting plate, one side of which is subjected to a constant heat flux and the opposite side is convectively cooled, is considered. The other two sides are maintained at constant temperature. A numerical solution for the temperature field is obtained and the heat transfer between the boxes is found by integrating between the critical heat flow lines. Various nondimensional parameters are identified and their influence on the thermal resistance is studied.