Raman imagery: a new approach to assess the geochemical maturity and biogenicity of permineralized precambrian fossils

Laser-Raman imagery is a non-intrusive, non-destructive analytical technique, recently introduced to Precambrian paleobiology, that can be used to demonstrate a one-to-one spatial correlation between the optically discernible morphology and kerogenous composition of permineralized fossil microorganisms. Made possible by the submicron-scale resolution of the technique and its high sensitivity to the Raman signal of carbonaceous matter, such analyses can be used to determine the chemical-structural characteristics of organic-walled microfossils and associated sapropelic carbonaceous matter in acid-resistant residues and petrographic thin sections. Here we use this technique to analyze kerogenous microscopic fossils and associated carbonaceous sapropel permineralized in 22 unmetamorphosed or little-metamorphosed fine-grained chert units ranging from approximately 400 to approximately 2,100 Ma old. The lineshapes of the Raman spectra acquired vary systematically with five indices of organic geochemical maturation: (1) the mineral-based metamorphic grade of the fossil-bearing units; (2) the fidelity of preservation of the fossils studied; (3) the color of the organic matter analyzed; and both the (4) H/C and (5) N/C ratios measured in particulate kerogens isolated from bulk samples of the fossil-bearing cherts. Deconvolution of relevant spectra shows that those of relatively well-preserved permineralized kerogens analyzed in situ exhibit a distinctive set of Raman bands that are identifiable also in hydrated organic-walled microfossils and particulate carbonaceous matter freed from the cherts by acid maceration. These distinctive Raman bands, however, become indeterminate upon dehydration of such specimens. To compare quantitatively the variations observed among the spectra measured, we introduce the Raman Index of Preservation, an approximate measure of the geochemical maturity of the kerogens studied that is consistent both with the five indices of organic geochemical alteration and with spectra acquired from fossils experimentally heated under controlled laboratory conditions. The results reported provide new insight into the chemical-structural characteristics of ancient carbonaceous matter, the physicochemical changes that accompany organic geochemical maturation, and a new criterion to be added to the suite of evidence by which to evaluate the origin of minute fossil-like objects of possible but uncertain biogenicity.     

Design of the TRIO system-on-chip for aerospace

Several design and testing aspects of the TRIO smart sensor data acquisition chip, developed by JHU/APL for NASA spacecraft applications are presented. TRIO includes a 10 bit self-corrected analog-to-digital converter (ADC), 16/32 analog inputs, a front end multiplexer with selectable aquisition time, a current source, memory, serial and parallel bus, and control logic. So far TRIO is used in many missions including Contour, Messenger, Stereo, Pluto, and the generic JPL X2000 spacecraft bus.     

Observations of diffuse galactic positron annihilation radiation

The Galactic plane was scanned nearly three times by the UCSD/MIT Hard X-Ray and Low Energy Gamma-Ray Experiment on HEAO-1 from August 1977 through September 1978. Its Medium Energy Detectors were of the NaI/CsI phoswich type and operated over the 100 keV to 2 MeV range, with a 17° FWHM field of view and a 9% energy resolution at 511 keV. Sky maps for each epoch of observation were constructed in several energy bands. After subtraction of known point sources, a component associated with the galactic plane remains, whose spectrum is consistent with a power law and a positron annihilation spectrum. In the 333 to 583 keV energy band the flux is concentrated within ±35° of the galactic center, and the ratio of flux/radian (anticenter) is high, with a 2σ lower limit of 13. The parameters of the galactic center region's annihilation spectrum are positronium fraction of 0.9±0.1 and 511 keV flux of (2.0±0.7)×10⁻³ photons/cm²-sec-rad.     

Orbital phase spectroscopy of four high mass X-ray binary pulsars to study the stellar wind of the companion

Our work focuses on a comprehensive orbital phase-dependent spectroscopy of the four High Mass X-ray Binary Pulsars (HMXBPs) 4U 1538-52, GX 301-2, OAO 1657-415 and Vela X-1. We hereby report the measurements of the variation of the absorption column density and iron-line flux along with other spectral parameters over the binary orbit for the above-mentioned HMXBPs in elliptical orbits, as observed with the Rossi X-ray Timing Explorer (RXTE) and the BeppoSAX satellites. A spherically symmetric wind profile was used as a model to compare the observed column density variations. Out of the four pulsars, only in 4U 1538-52, we find the model having a reasonable corroboration with the observations, whereas in the remaining three the stellar wind seems to be clumpy and a smooth symmetric stellar wind model appears to be quite inadequate in explaining the data. Moreover, in GX 301-2, neither the presence of a disk nor a gas stream from the companion was validated. Furthermore, the spectral results obtained in the case of OAO 1657-415 and Vela X-1 were more or less similar to that of GX 301-2.     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

Calculation of flight vehicle main support wheel vibrations taking into account brake forces

A model of the main support of the aircraft landing gear is presented and its dynamics is studied using the equations for the distributed motion of a wheel equipped with a brake. Stability of the support wheel rolling motion is analyzed and the brake parameter values which may cause stability loss are found. The results of numerical experiments are presented.     

Aircraft engine health management via stochastic modelling of flight data interrelations

A novel engine health management (EHM) scheme is introduced. It uses flight-level, instead of thermodynamic, data to cost-effectively augment the onboard EHM redundancy. For a nominal healthy aircraft, fault-sensitive interrelations among flight data are globally modelled inside a flight regime via Constant-Coefficient Pooled Nonlinear AutoRegressive with eXogenous (CCP-NARX) excitation representations. Single or sequential engine faults perturb these interrelations. Statistically evaluating the perturbation-induced effects draws reliable conclusions on the engine?s health. Validation and comparisons with Kalman filter-based alternatives are made throughout the regime under various operational conditions.     

Limits of flanging process feasibility to create thin-wall conical shells

In this paper, a process of flanging to create thin-walled axisymmetrical shells with the shape of truncated cone is analyzed. Also presented are some dependences that make it possible to determine the relative depth of a formed piece at the given piece-blank thickness ratio.