Effect of wall suction on leading edge contamination

This paper is devoted to an experimental study of swept wing leading edge contamination by the turbulence emanating from the wing-wall junction. The main objective is to delay the contamination onset by applying surface suction along the attachment line. Two series of experiments are described; the first one was performed in a small wind tunnel at CERT ONERA, the second one was carried out in the F2 wind tunnel at Le Fauga Mauzac centre. Hot film measurements showed that leading edge contamination could be delayed up to very large Reynolds numbers. We also studied the behaviour of the relaminarized boundary layer downstream of the sucked region, along the span as well as in the chordwise direction.     

A Major Step in Series Regulators

Power hybrid microelectronic design techniques have been developed to satisfy the requirements of 10-ampere 100-watt series voltage regulators. Application of these new techniques has resulted in a package occupying roughly the same volume as a TO-63 power transistor, yet containing two 30-ampere power transistors, selectable external components, and associated control circuitry.     

Frame Synchronization in the Presence of Errors and Erasures

An approach to the problem of achieving frame synchronization in the presence of jamming or other large disturbances is presented. It is assumed that the disturbance can be detected at the receiver, which then erases the corresponding bits and passes this information to the synchronizer. A synchronization algorithm designed to operate in the presence of both erasures and background errors is described and evaluated for a representative set of system parameters. This algorithm is shown to have a significant advantage over an algorithm which does not use the location information inherent in the erasure model.     

Confirmation of gravisensitivity in the slime mold physarum polycephalum under near weightlessness

We have investigated Physarum polycephalum, a unicellular organism with no special gravity receptors, on its ability to react to gravity. The first experiments were 0 g-simulation experiments on the fast-rotating clinostat conducted with plasmodial strands of this acellular slime mold. In these earth-bound experiments the observed parameters were periodicity of the contractions and dilatations of the strand's ectoplasm as well as the periodicity and velocity of the striking cytoplasmic (endoplasmic) shuttle streaming. During 0 g-simulation these parameters showed significant changes indicating the existence of a gravisensitivity of the slime mold.

The Space-Shuttle experiment (ESA-Biorack in D 1-Mission) should demonstrate the validity of the 0 g-simulation on the fast-rotating clinostat. The experiment was designed in a way enabling the registration of the same parameters as on the clinostat (using the light microscope in combination with a photo diode and a cinecamera). Only one of the two planned measurement sessions was fully successful and provided us with data confirming the results gained on the fast-rotating clinostat: The slime mold showed under real near weightlessness in the D 1-Space Shuttle Mission a transient frequency increase in its contraction rhythmicity and a (steady) increase in the streaming velocity of its endoplasm.     

Microorganisms and biomolecules in space environment experiment ES 029 on Spacelab-1.

Bacterial spores are proper test organisms for studying problems of space biology and exobiology. During the Spacelab 1 mission, studies on the limiting factors for survival of Bacillus subtilis spores in free space have been performed. An exposure tray on the pallet of Spacelab 1 accomodated 316 samples of dry spores for treatment with space vacuum and/or the following selected wavelengths of solar UV: > 170 nm, 220 nm, 240nm, 260nm and 280 nm. After recovery, inactivation, mutation induction, reparability, and photochemical damages in DNA and protein have been studied. The results contribute to the understanding of the mechanisms of increased UV sensitivity of bacterial spores in vacuo and to a better assessment of the chance of survival of resistant forms in space and of interplanetary transfer of life.     

Orbital and Attitude Prediction Accuracy Requirements for Satellites

This paper examines the criteria for selecting the orbital and attitude prediction accuracy requirements for communications satellites. The accuracy requirements have been analyzed in terms of the various space operations involved, e.g., satellite acquisition, guidance and control, communications, telemetry, and command. It is hoped that the findings of this investigation will prove useful in satellite mission planning and design, thereby facilitating a judicious choice of the various satellite and ground components of the related subsystems.     

Interplanetary acceleration of low-energy protons as observed during the 25 september 1978 shock event

ISEE-3 observations of a long-lasting low-energy proton intensity increase during the 25 September 1978 shock event are presented as an example for interplanetary particle acceleration in association with shock waves. The observations are discussed in the light of current models for particle acceleration. The particular shape of the time intensity behaviour of the particle intensity increase, the existence of a shock spike and the observed particle distributions indicate that the particles are accelerated at the shock by the induced electric field $\text{E}\text{= ?}\text{1}\text{c}\text{V}\text{×}\text{B}$.     

CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given