A relative navigation system for formation flight

A relative navigation system based on both the Inertial Navigation System (INS) and the Global Positioning System (GPS) is developed to support situational awareness during formation flight. The architecture of the system requires an INS/GPS integration across two aircraft via a data link. A fault-tolerant federated filter is used to estimate the relative INS errors based on relative GPS measurements and a range measurement obtained from the data link. The filter is constructed based on a reduced-order model of the relative INS error process. A method for analyzing the filter performance is presented. A case involving two helicopters in formation flight is studied under three different night trajectories to account for the effect of vehicle motion on the INS state transition matrix. The results of the covariance analysis are compared with actual night results over an instrumented test range.     

Topological defects and highest energy cosmic and gamma rays

In this paper we review the hypothesis that a substantial part of the cosmic ray flux observed above about 10¹⁹ eV may be produced by decaying or annihilating topological defects left over from phase transitions in the early universe at grand unification energy scales ( 10¹⁶ GeV). Possible signatures of cosmic ray producing defect models are discussed which could be tested experimentally in the near future. We thereby focus on model independent universal spectral properties of the predicted particle fluxes.     

Hydra — A 3-dimensional electron and ion hot plasma instrument for the POLAR spacecraft of the GGS mission

HYDRA is an experimental hot plasma investigation for the POLAR spacecraft of the GGS program. A consortium of institutions has designed a suite of particle analyzers that sample the velocity space of electron and ions between 2 keV/q – 35 keV/q in three dimensions, with a routine time resolution of 0.5 s. Routine coverage of velocity space will be accomplished with an angular homogeneity assumption of 16°, appropriate for subsonic plasmas, but with special 1.5° resolution for electrons with energies between 100 eV and 10 keV along and opposed to the local magnetic field. This instrument produces 4.9 kilobits s^–1 to the telemetry, consumes on average 14 W and requires 18.7 kg for deployment including its internal shielding. The scientific objectives for the polar magnetosphere fall into four broad categories: (1) those to define the ambient kinetic regimes of ions and electrons; (2) those to elucidate the magnetohydrodynamic responses in these regimes; (3) those to assess the particle populations with high time resolution; and (4) those to determine the global topology of the magnetic field. In thefirst group are issues of identifying the origins of particles at high magnetic latitudes, their energization, the altitude dependence of the forces, including parallel electric fields they have traversed. In thesecond group are the physics of the fluid flows, regimes of current, and plasma depletion zones during quiescent and disturbed magnetic conditions. In thethird group is the exploration of the processes that accompany the rapid time variations known to occur in the auroral zone, cusp and entry layers as they affect the flow of mass, momentum and energy in the auroral region. In thefourth class of objectives are studies in conjunction with the SWE measurements of the Strahl in the solar wind that exploit the small gyroradius of thermal electrons to detect those magnetic field lines that penetrate the auroral region that are directly open to interplanetary space where, for example, the Polar Rain is observed.     

Multiposition alignment of strapdown inertial navigation system

The authors demonstrate that the stationary alignment of strapdown inertial navigation system (SDINS) can be improved by employing the multiposition/technique. Using an observability analysis, it is shown that an optimal two-position alignment not only satisfies complete observability conditions but also minimizes alignment errors. This is done by analytic rank testing of the stripped observability matrix and numerical calculation of the error covariance. It is also shown that an optimal three-position alignment accelerates the convergence of the alignment error compared with two-position alignment     

Instrument Failure Detection in Partially Observable Systems

Instrument failure detection using the dedicated observer scheme (DOS) depends on partial state observability through each instrument which is monitored. For instrument fault detection by the DOS technique, a quantitative measure of partial state observability is established for each instrument and used to determine a necessary condition on the output structure of the system. This measure, called the internal redundancy of the instrument, indicates the complexity of the logic required for failure detection, and it also indicates where some hardware redundancy can be introduced into the system to improve the fault detection capability of the DOS. The principles developed are applied to a simulation of the pitch axis autopilot of the A7 jet aircraft.     

Adaptive Tracking Filter for Maneuvering Targets

A general method of continually restructuring an optimum Bayes-Kalman tracking filter is proposed by conceptualizing a growing tree of filters to maintain optimality on a target exhibiting maneuver variables. This tree concept is then constrained from growth by quantizing the continuously sensed maneuver variables and restricting these to a small value from which an average maneuver is calculated. Kalman filters are calculated and carried in parallel for each quantized variable. This constrained tree of several parallel Kalman filters demands only modest om; puter time, yet provides very good performance. This concept is implemented for a Doppler tracking system and the performance is compared to an extended Kalman filter. Simulation results are presented which show dramatic tracking improvement when using the adaptive tracking filter.     

Angular Accuracy of a Scanning Radar Employing a Two-Pole Filter

A two-pole filter is proposed as a detector for a scanning radar. The optimum values of the filter coefficients are found and are approximated by a simple expression. The optimum two-pole filter requires a 0.15-dB increase in signal-to-noise ratio in order to provide the same detection capability as the optimum detector, and yields azimuth estimates whose standard deviation are within 15 percent of the Cramér-Rao lower bound. The estimator is simple to implement, avoiding the storage requirements of the moving window detector and the bias complications of the feedback integrator.     

Ground Testing of Inertial Navigators to Improve Dynamic Performance

A ground testing method has been devised to evaluate the dynamic errors of an inertial navigation system. A trimmed stationary inertial system in the navigation mode can be subjected to programmed platform orm drift rates, and generate position outputs which are compared with those of a perfect navigator. The linearized error equations for this testing mode are derived and the resulting position error propagation is analyzed using Kalman filtering in order to identify the error sources. A simulated platform with a fixed set of error sources is analyzed to evaluate this testing concept. An example is presented to show that the gyro and accelerometer scale factor and misalignment error coefficients can be estimated.     

An interacting multiple model approach for target tracking withglint noise

The application of the interacting multiple model (IMM) estimation approach to the problem of target tracking when the measurements are perturbed by glint noise is considered. The IMM is a very effective approach when the system has discrete uncertainties in the dynamic or measurement model as well as continuous uncertainties. It is shown that this method performs better than the “score function” method. It is also shown that the IMM method performs robustly when the exact prior information of the glint noise is not available