Improved Accuracy Metallic Resonator CVG

Metallic resonator Q-factor is very sensitive to the resonator's material, its thermal and chemical treatment, design, and environment; i.e., pressure and temperature. In order to obtain higher accuracy for CVG it is necessary to use resonator evacuation. Resonator mass plays a very important role in sensitivity to angle rate, in stability of vibration, in response to environmental condition changes, and also to external vibration and shock resistance. tnnalabs Holding Inc. uses a cylindrical resonator with increased rim thickness of up to 2 mmn and more. This concerns resonator material and design parameters selection, material thermal treatment to increase resonator Q-factor, and improved control algorithms in order to increase metallic CVG accuracy. As a result, CVG bias instability of 0.025 degth and random walk of 0.008 degvh for the resonator diameter 43 mmn, and 0.2 deg/h for the resonator diameter 25 mm were obtained. Future opportunities for Innalabs CVG is also discussed herein. Test results are presented for CVG43 and CVG25. Three-axis CVG unit under control of one DSP "Sharc" and IMU parameters are forecasted.     

Launch Envelope Optimization of Virtual Sliding Target Guidance Scheme

This paper presents an optimization of the performance of a recently proposed virtual sliding target (VST) guidance scheme in terms of maximization of its launch envelope for three-dimensional (3-D) engagements. The objective is to obtain the launch envelope of the missile using the VST guidance scheme for different lateral launch angles with respect to the line of sight (LOS) and demonstrate its superiority over kinematics-based guidance laws like proportional navigation (PN). The VST scheme uses PN as its basic guidance scheme and exploits the relation between the atmospheric properties, missile aerodynamic characteristics, and the optimal trajectory of the missile. The missile trajectory is shaped by controlling the instantaneous position and the speed of a virtual target which the missile pursues during the midcourse phase. In the proposed method it is shown that an appropriate value of initial position for the virtual target in 3-D, combined with optimized virtual target parameters, can significantly improve the launch envelope performance. The paper presents the formulation of the optimization problem, obtains the approximate models used to make the optimization problem more tractable, and finally presents the optimized performance of the missile in terms of launch envelope and shows significant improvement over kinematic-based guidance laws. The paper also proposes modification to the basic VST scheme. Some simulations using the full-fledged six degrees-of-freedom (6-DOF) models are also presented to validate the models and technique used.     

Investigation of the infrared characteristics of the rocket nozzle

Investigation of the infrared characteristics of a rocket nozzle is very important for the study of infrared initiating technology. The Narrow-Band Zone model is developed for that purpose. The spectral transmission and absorption factors are introduced, and the equations between radiative heat flux and the temperature of waill surfaces and gas are developed. The radiative heat transfer in one axisymmetric cylindrical enclosure filled with homogeneous radiative participating medium is computed with the Narrow-Band Zone model and compared with those in the reference documents. The comparison shows good agreement. The radiative heat transfer to the nozzle of one rocket engine is also calculated with the Narrow-Band Zone model, and the outgoing radiative energy flux and energy rate integrated in a mid-wave infrared band 2-6 pm, a long-wave infrared band 8-14 pm and the full wave band are analyzed. The following conclusions can be derived: the spectral radiation from the inlet and outlet of the nozzle show apparent spectral discontinuity, which appears greater in the 2.7-2.95 pm than in the neighboring wave band. The spectral outgoing radiative energy flux of nozzle wail is similar to that of gray body, which decreases with wavelength in 2-14 pm. The outgoing radiative energy flux on the nozzle wall is greater in the cylindrical and contracting section of nozzle, but smaller in the divergent section, which is determined by temperature. The nozzle of the rocket engine radiates most energy in the mid-wave surfaces by absorption. The most important feature of gas radiation is the strong selection of the waveband, so the detailed study of the infrared characteristics of nozzle of the rocket engine should be carried out on narrow-band computation.     

Investigating Earth’s Atmospheric Electricity: a Role Model for Planetary Studies

The historical development of terrestrial atmospheric electricity is described, from its beginnings with the first observations of the potential gradient to the global electric circuit model proposed by C.T.R. Wilson in the early 20th century. The properties of the terrestrial global circuit are summarised. Concepts originally needed to develop the idea of a global circuit are identified as “central tenets”, for example, the importance of radio science in establishing the conducting upper layer. The central tenets are distinguished from additional findings that merely corroborate, or are explained by, the global circuit model. Using this analysis it is possible to specify which observations are preferable for detecting global circuits in extraterrestrial atmospheres. Schumann resonances, the extremely low frequency signals generated by excitation of the surface-ionosphere cavity by electrical discharges, are identified as the most useful single measurement of electrical activity in a planetary atmosphere.     

Flywheel technology: past, present, and 21st century projections

This paper describes the present status of flywheel energy storage technology, or mechanical batteries, and discusses realistic future projections that are possible based on stronger composite materials and advancing technology. The origins and use of flywheel technology for mechanical energy storage began several hundred years ago and was developed throughout the Industrial Revolution. One of the first “modern” dissertations on the theoretical stress limitations of rotational disks (isotropic only) is the seminal work by A. Stodola whose first translation to English was made in 1917. The next big milestones were during the 1960s and 1970s when NASA sponsored programs proposed energy storage flywheels as possible primary sources for space missions. However, it was not until the 1980's when microelectronics, magnetic bearing systems and high power density motor-generators became enabling technologies. The next decade proved that a mechanical battery could surpass chemical batteries for many applications     

Initial results from the ISEE-1 and -2 plasma wave investigation

In this paper we present an initial survey of results from the plasma wave experiments on the ISEE-1 and -2 spacecraft which are in nearly identical orbits passing through the Earth's magnetosphere at radial distances out to about 22.5R _e . Essentially every crossing of the Earth's bow shock can be associated with an intense burst of electrostatic and whistler-mode turbulence at the shock, with substantial wave intensities in both the upstream and downstream regions. Usually the electric and magnetic field spectrum at the shock are quite similar for both spacecraft, although small differences in the detailed structure are sometimes apparent upstream and downstream of the shock, probably due to changes in the motion of the shock or propagation effects. Upstream of the shock emissions are often observed at both the fundamental, f _- ^p , and second harmonic, 2f _p ^- , of the electron plasma frequency. In the magnetosphere high resolution spectrograms of the electric field show an extremely complex distribution of plasma and radio emissions, with numerous resonance and cutoff effects. Electron density profiles can be obtained from emissions near the local electron plasma frequency. Comparisons of high resolution spectrograms of whistler-mode emissions such as chorus detected by the two spacecraft usually show a good overall similarity but marked differences in detailed structure on time scales less than one minute. Other types of locally generated waves, such as the (n+1/2)f _- ^g electron cyclotron waves, show a better correspondence between the two spacecraft. High resolution spectrograms of kilometric radio emissions are also presented which show an extremely complex frequency-time structure with many closely spaced narrow-band emissions.     

A State-Trajectory Control Law for DC-to-DC Converters

Mathematical representations of a state-plane switching boundary employed in a state-trajectory control law for dc-to-dc converters are derived. Several levels of approximation to the switching boundary equations are presented, together with an evaluation of the effects of nonideal operating characteristics of converter power stage components on the shape and location of the boundary and the behavior of a system controlled by it. Digital computer simulations ions of d-to-dc converters operating in conjunction with each of these levels of control are presented and evaluated with respect to changes in transient and steady-state performance.     

Monopulse Estimation of the Centroid of an Ensemble of Radar Scatterers

The use of data obtained by a monopulse radar to estimate the location of the radar cross-section centroid of an ensemble of scatterers is discussed. Both dish and phased-array antenna radars are treated. Expressions for the bias and variance of the centroid estimates are presented, including the effects of the radar receiver and beam pattern characteristics, receiver noise, and the video waveform sampling granularity, as well as the target properties. The monopulse tracking approach discussed here is contrasted with a raster scan approach presented previously.