A comparison of semi-empirical models in the lower thermosphere

Semi-empirical models are derived predominantly from satellite-borne observations. The nature of these observations restricts the applicability of the models mainly to the atmospheric regions sampled, i.e. the upper thermosphere. Current models are only capable of reproducing a zero-order approximation of the structure of the lower thermosphere. Based on selected examples, the progress in atmospheric research since CIRA-72 as well as the continuing deficiencies are demonstrated.     

Millimeter wave radiation sources visible in solar corona

Coronal millimeter wave sources (CMMS) have been observed at radio frequencies 22–90 GHz (at wavelengths 3–13 mm). The observed CMMS have been classified into three different categories according to their time scale and relation to other wave-length events. The CMMS indicate enhancement of electron density in the corona, as well as magnetic loop structures. The CMMS are evidence of dynamical processes taking place at the lower levels of the corona, propagating into the higher levels.     

Travelling heater growth of GaSb under reduced gravity during the first spacelab-mission

Single crystals of binary III-V-semiconductors, e.g. GaAs or InP, are important basic materials for optoelectronic devices, e.g. LED's and lasers. Device production needs highly perfect substrate crystals with low defect densities and homogeneous dopant distributions. In our experiment we applied the Travelling-Heater-Method to grow the III-V compound GaSb. The aim of this research project was to improve the crystal quality by investigating convective transport phenomena and the origins of dopant inhomogeneities under earth and space conditions. Earth grown crystals show strong dopant variations mainly due to convective flow phenomena. The preliminary result of our SPACELAB 1 experiment reveals an increase of dopant homogeneity in the space grown crystal because of the absence of natural convection under reduced gravity.     

Mesospheric ozone densities deduced from solar occultation measurements

Quartz-UV occultation measurements by the satellite Interkosmos-16 have been used to calculate ozone densities at altitudes between 50 and 90 km for the period August to October 1976. Below 65 km densities agree well with the Krueger-Minzner-model. Mesopause densities have been studied in some detail. A certain percentage of the profiles show close correlation with the model of Shimazaki and Laird (with a pronounced minimum below the mesopause) while others fit better to the Park and London model (no minimum). This variability of the ozone density may be caused by different processes in the photo-chemistry of ozone. Two possible causes, the temperature dependent rate coefficients and the odd hydrogen processes are discussed in greater detail.     

Net electric power of concentrating solar mirror systems for application in space as a function of the distance to the sun

The use of solar radiation by means of concentrating solar mirror systems, such as parabolic and spheric configurations, mainly is an engineering problem. A decisive characteristic for the optimisation of a complete system with turboelectric power conversion is the thermal cycle applied. Besides the Carnot process, here taken up into the study as an ideal comparative process, suitable processes for the technological realisation are the Brayton process and the Rankine process. The Brayton process is a typical gas turbine process using only the gaseous phase. The Rankine process is a steam engine process using liquid and gaseous phase.The work in hand shows how such solar systems with turboelectric conversion are optimised with respect to their specific weight (kg/kW_e) and how the distance to the sun as well as technological data enter into the analysis.As expected, the Carnot cycle as an ideal comparative process for both types of systems shows the best results for the optimum specific mass of the system. Regarding the real processes, the Rankine cycle shows more favourable characteristics than the Brayton cycle. The difference of the specific masses of the real processes mainly results from the different thermal conditions at the radiator.The influence of the distance to the sun is as expected. The nearer to the sun the solar power system operates, the better is the optimum specific mass of the system. For distances to the sun between 0.3 and 1.0 AU the spheric system shows a better behaviour than the parabolic system. For distances to the sun greater than 2.0 AU the parabolic system shows better behaviour of the specific weight. In the region between 1 and 2 AU the better optimum specific mass of the system belongs to the technological data used in the analysis.     

GPS modeling for designing aerospace vehicle navigation systems

The complexity of the design of a Global Positioning System (GPS) user segment, as well as the performance demanded of the components, depends on user requirements such as total navigation accuracy. Other factors, for instance the expected satellite/vehicle geometry or the accuracy of an accompanying inertial navigation system can also affect the user segment design. Models of GPS measurements are used to predict user segment performance at various levels. Design curves are developed which illustrate the relationship between user requirements, the user segment design, and component performance     

Nickel-Cadmium Batteries as Capacitive Filters for Pulsed Loads

This investigation consisted of several tests of specially fabricated nickel-cadmium batteries having circular disk-type electrodes. These batteries were evaluated as filter elements between a constant current power supply and a 5 Hz pulsed load demanding approximately twice the power supply current during the load on a portion of the cycle. Short tests lasting 104 cycles were conducted at up to a 21 C rate and an equivalent energy density of over 40 J/Ib. In addition, two batteries were subjected to 10h dischar cycles, one at a 6.5 C rate and the other at a 13 C rate. Assuming an electrode-to-battery weight ratio of 0.5, these tests represent an energy density of about 7 and 14 J/Ib, respectively. Energy density, efficiency, capacitance, average voltage, and available capacity were tracked during these tests. After 10y capacity degradation was negligible for one battery and about 20 percent for the other. Cadmium electrode failure may be the factor limiting lifetime at extremely low depth of discharge cycling. The output was examined and a simple equivalent circuit was proposed.     

Extraction of mineral elements from inedible wastes of biological components of a life-support system and their utilization for plant nutrition.

Two methods of extracting mineral elements from otherwise deadlock products of a life-support system are presented. We describe first optimum conditions for recovering elements by water extraction from dry wastes of plants, biomass ash, and solid human wastes after passing them through the catalytic furnace; and, second, we describe acid extracts of biogenous elements by 1N and 2N HNO3 from these products. Ways to use the extracts of elements in plant nutrition are considered in order to increase the extent to which the mineral loop of a life-support system can be closed.     

Approximate qualitative spatial reasoning

Qualitative relations between spatial regions play an importantrole in the representation and manipulation of spatial knowledge.The RCC5 and RCC8 systems of relations,used in the Region-Connection Calculus, are of fundamentalimportance. These two systems deal with ideal regions havingprecisely determined location. However,in many practical examples of spatial reasoning,regions are represented by finite approximations rather than known precisely.Approximations may be given by describing how a regionrelates to cells forming a partition of the space underconsideration. Although the RCC5 and RCC8 systems have beengeneralized to ``egg-yolk' regions, in order to modelcertain types of vagueness, their extension to regionsapproximated in this way has not been discussed before.This paper presents two methods, the syntactic and the semantic, by which the RCC5 and RCC8 systemsmay be defined for approximate regions. The syntactic uses algebraicoperations on approximate regions which generalize operations on preciseregions. The semantic method makes use of the set of preciseregions which could be the intended interpretation of anapproximate region. Relationships between these two methods arediscussed in detail.alternative to navigation training with a map.